Epson LQ-690 Instruction Manual

Proof Sign-off:
Y.Nakano
J.Hasegawa
R41AA1880
Rev.A
SH.fm A2 size
8/12/13
Start Here
Continued Continued on back
4125915
1-F
Rev.0
Black
Unpacking
Connecting the Power Cord
Assembling the Printer
Connecting the Printer to Your Computer
1
Remove all protective tapes
Connect
Plug in
OFF
2
Confirm the (OFF)
3
Turn on the power
ON
Print head moves to home position.
cCaution:
Do not touch the white cable inside the printer.
Confirm the print head is in the middle
OFF
Turn off the power
Insert until it clicks
Tense
cCaution:
❏The interface cable connectors have only one correct orientation. Make sure the orientation of the connector is correct before inserting it
into the appropriate port.
❏Please do no plug-in and plug-out during power on.
USB
IEEE1284 (PARALLEL)
Connect firmly
Connect firmly
Connect firmly
Connect firmly
4

Proof Sign-off:
Y.Nakano
J.Hasegawa
R41AA1880
Rev.A
SH.fm A2 size
8/12/13
Continued
4125915
1-B
Rev.0
Black
Installing the Printer Software
Loading Paper
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of Seiko Epson Corporation. No patent liability is assumed with respect to use of the information contained herein. Neither is any liability assumed for damages resulting from the use of
the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result
of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating
and maintenance instructions.
Seiko Epson Corporation and its affiliates shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original
Epson Products or Epson Approved Products by Seiko Epson Corporation.
EPSON is a registered trademark of Seiko Epson Corporation.
Microsoft®, Windows®, and Windows Vista®are registered trademarks of Microsoft Corporation in the United States and/or other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson
disclaims any and all rights in those marks.
The contents of this manual are subject to change without notice.
Copyright © 2013 Seiko Epson Corporation. All rights reserved.
Printed in XXXX
Insert
Turn on the power
5
Note:
Installing the printer software may require administrator privileges. If you have problems, ask your administrator for more information.
Windows 7/Vista/XP/2000
OFF
Confirm the (OFF)
ON
Follow the
instructions
Windows 7 and Vista only
Windows 8
Download the printer
driver and install it
Printing on continuous paper with the push tractor
6
Move the left sprocket to 0 and lock it Slide the right sprocket to the edge of the paper
Lock
Fit the paper
Raise the lever
Slide the edge guide
Unlock
Do not lock
Slide the center paper support to
the middle of the two sprockets
Open the sprocket covers of the both sprockets
Fasten Fasten
Lock
Printing on single sheets
Push back the lever
Slide the edge guide until it rests against
the guide mark
Insert the paper
7Now setup is finished and the printer is ready.
If you cannot find the information you require in the User's Guide, visit our Web site:
For detailed information about the printer and troubleshooting, refer to the User's Guide.
Copy by drag & drop or
Open by double-click