Epson RX690 Series User manual

Copyright © 2007 Seiko Epson Corporation. All rights reserved.
Printed in XXXXXX XX.XX-XX XXX
Start Here
1. Unpacking
4. Turning On
2. Removing Protective Tape
3. Connecting the USB Cable 7. Installing the Software
Note:
The ink cartridges first installed in your printer will be partly used to charge the print head.
These cartridges print fewer pages compared to subsequent ink cartridges.
Turn over
Ink Cartridge Power Cord CD-ROM Start Here Basic Operation Guide
Remove all tape
Connect
Plug in
Turn on
Select
6. Installing the Ink Cartridges
CD/DVD Tray
Open Unpack
Press
If this screen appears,
click Cancel.
Insert
Double-click
For Windows
For Mac OS X
Click
When this screen appears, connect to your PC.
Installation complete.
Follow the
instructions.
Follow the
instructions.
Do not connect the USB cable until you are instructed to do so.
oFor Windows. No installation screen? &Double-click the CD-ROM icon.
Install Press (Click) Close (Click) Close
Press
Ready to copy
Wait about 2.5 min.
Open
Only remove
the yellow tape.
Note:
oDo not open the ink cartridge package until you are ready to install it in the printer. The cartridge is vacuum packed to maintain its
reliability.
oStore the CD/DVD tray flat.
: Warnings must be followed carefully to avoid bodily injury.
Open
Remove
5. Selecting a Language
Connect Slot in Close

Loading Paper
Into the rear feeder
Placing an Original
Getting More Information
Open and extend
Pull out
Open and slide
Open Close
Copying Printing from a Memory Card
Basic
Operation
Guide
-for use without
a computer-
User’s Guide
(for use with a computer)
Double-click
Printing with a PC
Printing with options
(BLUETOOTH Photo Print Adapter and Auto
Duplexer)
Troubleshooting Scanning
Troubleshooting Printing from an External
Device
Place an original
Pinch and slide
Fit
Fit and close
Into the front paper cassette
Lift off Load
Opening the Output Tray
Open Extend
Fit Replace Insert
horizontally
Brighter or glossier side up
Brighter or glossier side
face down