Epson Perfection V700 Series User manual

EPSON Perfection V700 Photo
Color Image Scanner
Service Manual
SESC05006

Notice
All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted in any form or by any means electronic, mechanical,
photocopying, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION.
All effort have been made to ensure the accuracy of the contents of this manual. However, should any errors be detected, SEIKO EPSON would greatly
appreciate being informed of them.
The contents of this manual are subject to change without notice.
The above not withstanding, SEIKO EPSON CORPORATION can assume no responsibility for any errors in this manual or the consequences thereof.
EPSON is a registered trademark of SEIKO EPSON CORPORATION.
General Notice: Other product names used herein are for identification purpose only and may be trademarks or registered trademarks of their respective owners.
EPSON disclaims any and all rights in those marks.
Copyright © 2005 SEIKO EPSON CORPORATION.
IMAGING PRODUCTS CS & PL MANAGEMENT

PRECAUTIONS
Precautionary notations throughout the text are categorized relative to 1) Personal injury and 2) damage to equipment.
DANGER Signals a precaution which, if ignored, could result in serious or fatal personal injury. Great caution should be exercised in performing procedures preceded by
DANGER Headings.
WARNING Signals a precaution which, if ignored, could result in damage to equipment.
The precautionary measures itemized below should always be observed when performing repair/maintenance procedures.
DANGER
1. ALWAYS DISCONNECT THE PRODUCT FROM THE POWER SOURCE AND PERIPHERAL DEVICES PERFORMING ANY MAINTENANCE OR REPAIR PROCEDURES.
2. NO WORK SHOULD BE PERFORMED ON THE UNIT BY PERSONS UNFAMILIAR WITH BASIC SAFETY MEASURES AS DICTATED FOR ALL ELECTRONICS
TECHNICIANS IN THEIR LINE OF WORK.
3. WHEN PERFORMING TESTING AS DICTATED WITHIN THIS MANUAL, DO NOT CONNECT THE UNIT TO A POWER SOURCE UNTIL INSTRUCTED TO DO SO. WHEN
THE POWER SUPPLY CABLE MUST BE CONNECTED, USE EXTREME CAUTION IN WORKING ON POWER SUPPLY AND OTHER ELECTRONIC COMPONENTS.
4. WHEN DISASSEMBLING OR ASSEMBLING A PRODUCT, MAKE SURE TO WEAR GLOVES TO AVOID INJURY FROM METAL PARTS WITH SHARP EDGES.
WARNING
1. REPAIRS ON EPSON PRODUCT SHOULD BE PERFORMED ONLY BY AN EPSON CERTIFIED REPAIR TECHNICIAN.
2. MAKE CERTAIN THAT THE SOURCE VOLTAGE IS THE SAME AS THE RATED VOLTAGE, LISTED ON THE SERIAL NUMBER/RATING PLATE. IF THE EPSON PRODUCT
HAS A PRIMARY AC RATING DIFFERENT FROM AVAILABLE POWER SOURCE, DO NOT CONNECT IT TO THE POWER SOURCE.
3. ALWAYS VERIFY THAT THE EPSON PRODUCT HAS BEEN DISCONNECTED FROM THE POWER SOURCE BEFORE REMOVING OR REPLACING PRINTED CIRCUIT
BOARDS AND/OR INDIVIDUAL CHIPS.
4. IN ORDER TO PROTECT SENSITIVE MICROPROCESSORS AND CIRCUITRY, USE STATIC DISCHARGE EQUIPMENT, SUCH AS ANTI-STATIC WRIST STRAPS, WHEN
ACCESSING INTERNAL COMPONENTS.
5. DO NOT REPLACE IMPERFECTLY FUNCTIONING COMPONENTS WITH COMPONENTS WHICH ARE NOT MANUFACTURED BY EPSON. IF SECOND SOURCE IC OR
OTHER COMPONENTS WHICH HAVE NOT BEEN APPROVED ARE USED, THEY COULD CAUSE DAMAGE TO THE EPSON PRODUCT, OR COULD VOID THE
WARRANTY OFFERED BY EPSON.
6. WHEN USING COMPRESSED AIR PRODUCTS; SUCH AS AIR DUSTER, FOR CLEANING DURING REPAIR AND MAINTENANCE, THE USE OF SUCH PRODUCTS
CONTAINING FLAMMABLE GAS IS PROHIBITED.

About This Manual
This manual describes basic functions, theory of electrical and mechanical operations, maintenance, and repair procedures of the printer. The instructions and procedures included
herein are intended for experienced repair technicians, and attention should be given to the precautions on the preceding page.
Manual Configuration
This manual consists of six chapters and Appendix.
CHAPTER 1. PRODUCT DESCRIPTION
Describes the features and basic specifications of the product.
CHAPTER 2. OPERATING PRINCIPLES
Describes the electrical and mechanical basic operating principles of
the product.
CHAPTER 3. TROUBLESHOOTING
Describes the step-by-step procedures for the troubleshooting.
CHAPTER 4. DISASSEMBLY/ASSEMBLY
Describes the step-by-step procedures for disassembling and
assembling the product.
CHAPTER 5. ADJUSTMENT
Provides Epson-approved methods for adjustment.
CHAPTER 6. MAINTENANCE
Provides preventive maintenance procedures and the list of Epson-
approved lubricants and adhesives required for servicing the product.
APPENDIX Provides the following additional information for reference:
• Connector pin assignments
• Electric circuit boards components layout
• Electrical circuit boards schematics
• Exploded diagram
•PartsList
Symbols Used in this Manual
Various symbols are used throughout this manual either to provide additional
information on a specific topic or to warn of possible danger present during a
procedure or an action. Be aware of all symbols when they are used, and always read
NOTE, CAUTION, and WARNING messages.
Indicates an operating or maintenance procedure, practice or
condition that is necessary to maintain the product’s quality.
Indicates an operating or maintenance procedure, practice, or
condition that, if not strictly observed, could result in damage to,
or destruction of, equipment.
May indicate an operating or maintenance procedure, practice or
condition that is necessary to accomplish a task efficiently. It
may also provide additional information that is related to a
specific subject, or comment on the results achieved through a
previous action.
Indicates an operating or maintenance procedure, practice or
condition that, if not strictly observed, could result in injury.
Indicates a product reassembly procedure, practice or condition
that must be executed in accordance with the specified standards
to maintain the product's quality.
A D J U S T M E N T
R E Q U I R E D
C A U T I O N
CHECK
P O I N T
W ARNING

Revision Status
Revision Date of Issue Description
A December 20, 2005 First release

EPSON Perfection V700 Photo Revision A
6
Contents
Chapter 1 Product Description
1.1 Features.................................................................................................................. 9
1.2 Scanner Parts ....................................................................................................... 10
1.3 Scanner Specification .......................................................................................... 10
1.4 Exterior Specifications ........................................................................................ 13
1.5 Control Codes...................................................................................................... 15
1.6 Error-Time Processing......................................................................................... 16
1.7 Maximum Document Size and Placement .......................................................... 17
Chapter 2 Operating Principles
2.1 Engine Operation Outline.................................................................................... 20
2.1.1 Carriage Unit ...............................................................................................20
2.1.2 TPU Carriage Unit Outline..........................................................................21
2.1.3 Drive Mechanism operation ........................................................................22
2.1.4 Dual Lens System ........................................................................................24
2.2 Digital ICE Function Operation .......................................................................... 25
2.2.1 Digital ICE for Photos Overview ................................................................25
2.2.2 Digital ICE for Film Overview....................................................................25
2.3 Circuit Boards...................................................................................................... 27
2.3.1 General View of Circuit Boards ..................................................................27
2.3.2 The Main Board...........................................................................................28
2.3.3 The TPU Main Board ..................................................................................28
2.3.4 Image Processing Operation ........................................................................29
Chapter 3 Troubleshooting
3.1 Overview ............................................................................................................. 31
3.1.1 Self-Diagnosing ...........................................................................................31
3.2 Troubleshooting................................................................................................... 31
Chapter 4 Disassembly / Assembly
4.1 Overview ............................................................................................................. 36
4.1.1 Precautions...................................................................................................36
4.1.2 Recommended Tools ...................................................................................37
4.1.3 Recommended Screws.................................................................................37
4.2 Disassembly Procedure ....................................................................................... 38
4.2.1 Removing the TPU Unit ..............................................................................39
4.2.2 Removing the Upper Housing .....................................................................40
4.2.3 Removing the SUB Board ...........................................................................43
4.2.4 Removing the Panel Board ..........................................................................44
4.2.5 Removing the Main Board ..........................................................................45
4.2.6 Removing the Carriage Unit........................................................................48
4.2.7 Removing the CR Motor .............................................................................50
4.2.8 Removing the Driven Pulley Unit ...............................................................53
4.2.9 Removing TPU Lower Housing ..................................................................54
4.2.10 Removing the TPU Carriage Unit .............................................................55
4.2.11 Removing the TPU Unit Cable..................................................................57
4.2.12 Removing the SUB_B Board and TPU Inverter Board.............................58
4.2.13 Removing the SUB_C Board, SUB_D Board and Lamps ........................59
4.2.14 Removing the DRV Board ........................................................................61
4.2.15 Removing the Hinges ................................................................................62
4.2.16 Removing the TPU CR Motor...................................................................63
4.2.17 Removing Compression Spring 3.15.........................................................65
Chapter 5 Adjustment
5.1 No Special Adjustments ...................................................................................... 67
Chapter 6 Maintenance
6.1 Overview ............................................................................................................. 69
6.1.1 Cleaning.......................................................................................................69
6.1.2 Lubrication...................................................................................................69

EPSON Perfection V700 Photo Revision A
7
Chapter 7 Appendix
7.1 Connectors........................................................................................................... 73
7.1.1 Connector Configuration .............................................................................73
7.1.2 Connector Reference Table .........................................................................73
7.2 Circuit Diagrams ................................................................................................. 74
7.3 Exploded Diagram............................................................................................... 84
7.4 Service Parts List................................................................................................. 89

CHAPTER
1
PRODUCT DESCRIPTION

EPSON Perfection V700 Photo Revision A
Product Description Features 9
1.1 Features
Dual Lens system allows superior resolutions of 4800 x 9600
and 6400 x 9600dpi
Delivers extraordinary image quality and detail
48-bit color depth and exceptional dynamic range (up to 4.0 Dmax)
Produces smooth gradations and intricate shadow detail from
negatives and transparencies
State-of-the-art Digital ICE™Technology
Automatically corrects tears, scratches, folds, and creases on both
film and photos
Built-in 5.8” x 9.74” transparency unit (TPU) with moving light source
Scans up to twenty-four 35 mm negative images simultaneously
Oversized films (up to 8” x 10”) can be scanned
Faster scans and better image quality
Innovative Epson Easy Photo Fix™technology
Automatic color restoration and dust removal features
Includes three convenient scanning modes for maximum control and
flexibility
Hi-Speed USB2.0 and FireWire®(IEEE1394) connectivity
EPSON Creativity Suite
Easy-to-use with thumbnail view function
Link indicator for easy scanning
Support for a variety of file types: BMP, JPEG, TIFF, RAW, PICT,
and PDF
EPSON Scan
Graphic user interface: Full Auto Mode, Home Mode and
Professional Mode
Allows image data files to be saved without a separate graphics
application
Additional image editing tools: histogram, multi-level unsharp mask,
de-screening and tone-curve editor
Full automatic mode (flatbed and film)
Thumbnail view support
Image enhancement functions: dust remover and grain reduction
(supports a new tool for color restoration)
Natural or Vivid mode can be selected for processing scanned
images
Compatible with Windows XP 64-Bit Edition
Scans multipage document to multipage PDF

EPSON Perfection V700 Photo Revision A
Product Description Scanner Parts 10
1.2 Scanner Parts 1.3 Scanner Specification
Basic Specifications
Scanner type Flatbed, color
Photoelectric device 6-line color CCD with micro lens
Scanning method Moving carriage, stationary document
Effective pixels 40,800 x 56,160pixels at 4800dpi
37,760 x 62,336pixels at 6400dpi
Maximum US letter or A4 size
document size 8.5 x 11.7inches (216 x 297mm)
Optical resolution 4800dpi
Maximum hardware 4800dpi (main scan) x 9600dpi (subscan)
resolution*6400dpi (main scan) x 9600dpi (subscan)
Note *: Newly mounted Dual Lens system enables the two different resolutions.
Super (6400dpi) and High (4800dpi)
Resolution lenses can be switched depending document type and scan mode
specified by the scanner driver.
The maximum hardware resolution of 4800/6400 x 9600 dpi is achieved using
EPSON's Micro Step Drive™technology.
Scanning 8" x 10" size at 4800dpi, 24 bit color is impossible under the following
conditions:
• When the image file type is Bmp or Tiff, the file types do not allow the file size to be over 4GB.
• When the image file type is Jpeg, the file type does not allow the file size to be over 2GB.
Maximum interpolated 12,800 dpi
resolution
Output resolution 25 to 12,800 dpi in 1 dpi increments
Speed (color) 12.3msec/line at 4800dpi
3.1msec/line at 600dpi
Command level ESC/I (B8), FS
Pixel depth 16 bits per pixel (input and output)
Interfaces USB1.1/2.0 (Type B receptacle connector)
IEEE1394 (FireWire™)
Light source White cold cathode fluorescent lamp
Reliability (MCBF) 100,000 cycles of carriage movement
TPU Indicator LightDocument Cover
Indicator LightPower Button
Start Button
OPTION Transportation Lock
in Unlocked Position
IEEE 1394 Port USB Port
Document Table
Carriage and Lamp in
the Home Position
Transparency Unit (TPU) Under the Lid
TPU Transportation Lock

EPSON Perfection V700 Photo Revision A
Product Description Scanner Specification 11
Image processing function
Gamma correction 2 CRT levels
3 Printer levels
1 User defined level
Color correction 4 Levels standard, according to output:
Impact-Dot Printer
Thermal Printer
Ink-Jet Printer
CRT Display
1 User defined level
Brightness 7 levels (in EPSON Scan, gamma correction
controls brightness)
Data processing Halftone Processing Bi-level processing on the
fixed threshold value
(for the image data of bi-level and 4-level)
Dimensions
Product Width: 12.3inches (30.8cm)
Depth: 20.1inches (50.3cm)
Height: 6.1inches (15.25cm)
Weight: 14.5lb. (6.6 kg)
Electrical
Rated input 100 - 120 VAC (100 V Model)
voltage 220 - 240 VAC (220 V Model)
Rated input 50 - 60 Hz (100 V and 220 V models)
frequency
Rated input 0.8A at 100VAC
current 0.4A at 200VAC
Power Operation: 32 W
consumption Standby mode: 19 W
Sleep mode: 4 W
Energy International Energy Star®Program compliant
conservation
Warm up time 40 seconds max. at 25°C (TBD)
65 seconds max. at 5°C (TBD)
Current 500VDC: > 100 MΩ
resistance (AC input terminal and DC output terminal)
Voltage resistance 3000VAC for 1 min.
(AC input terminal and DC output terminal)
Static electricity Contact discharge: 4.5 kV
Air discharge: 8.5 kV
Environmental
Temperature Operation: 41 to 95°F (5 to 35°C)
Storage: -13 to 140°F (-25 to 60°C)
Humidity Operation: 10% to 80%
(non-condensing) Storage: 10% to 85%
Operating Ordinary office or home conditions; avoid
conditions extreme dust, direct sunlight, and strong
light sources.

EPSON Perfection V700 Photo Revision A
Product Description Scanner Specification 12
USB Interface
Interface type Universal Serial Bus Specification Revision 2.0
Connector type One self-powered receptacle, Type B. Must be
connected directly to the host or to tier 1 in a hub
FireWire Interface
Interface type IEEE 1394a-2000 compatible
Data transfer Half-duplex data/strobe differential serial
Synchronization Clock synchronization with DS-Link
Encoding/decoding DS-Link
Logic level 3.3 V
Figure 1-1. Interfaces
Operating System Compatibility
IEEE1394 I/F Microsoft Windows XP Home, Professional
Microsoft Windows 2000 Professional
Microsoft Windows Me
Mac OS X 10.2 or later*1
USB 1.1 I/F *2, 3 Microsoft Windows XP Home, Professional
Microsoft Windows 2000 Professional
Microsoft Windows 98 Second edition or later /Me
Mac OS X 10.2 or later*1
USB 2.0 I/F*2, 3, 4, 5 Microsoft Windows XP Home, Professional
Microsoft Windows 2000 Professional
Mac OS X 10.2.7 or later*1
Note *1: EPSON Scan (EPSON driver)/SilverFast®works independently or only with
Adobe®Photoshop®CS in Mac OS X native mode. Some applications and/or
functions only work in Mac OS X classic mode.
*2: This device must be connected directly to the host or to a hub in tier 1 or 2. Use an
approved USB cable.
*3: The functionality of USB port(s) is the responsibility of the host vendor.
*4: Microsoft USB2.0 driver is required.
*5: For PCs pre-installed with Windows 2000 Professional, Windows XP Home or
Professional, or upgraded to Windows XP from Windows 2000 Professional only.
Lid TPU specification
Type Moving carriage
Light source White cold-cathode fluorescent lamp x 2
IR LED board x 2, each board has 24 LEDs
Max scan size Standard: 5.9inches x 9.74inches
(149mm x 247mm)
Max: 8inches x 10inches (203mm x 254mm)*
Note * : With a Film Area Guide. Digital ICE and thumbnail view function cannot be used.
Film sizes 35mm (135) strip film: 24frames
35mm (135) mounted film: 12frames
Medium format film (120/220): 2frames
4 inches x 5 inches film: 2frames*
Note * : Thumbnail view function cannot be used.
Power supply 24VDC ± 10%, 5VDC ± 5%
Supplied by the scanner unit
Indicator LED Blue, lit in synchronization with the TPU lamp.
Dimensions Width: 11.9inches (29.8cm)
Depth: 18.7inches (46.8cm)
Height: 1.9inches (4.8cm)
Weight Approx. 4.8lb (2.2kg)
IEEE1394 OPTION USB2.0

EPSON Perfection V700 Photo Revision A
Product Description Exterior Specifications 13
Electromagnetic Interference Standards Compliance
100 V model VCCI Class B (Japan)
Harmonics Current Stand are JIS C 61000-3-2 (Japan)
FCC 15B Class B (USA)
CAN/CSA-CEI/IEC CISPR 22 Class B
(Canada) (FCC represents)
CNS13438 Class B/CNS14336 (Taiwan)
200 V model EN55022 (CISPR Pub22)Class B
EN61000-3-2
EN61000-3-3
EN55024
AS/NZS3548 Class B (Australia)
Korea EMC
Russia consumer protection law
CCC (China)
1.4 Exterior Specifications
Explanation of switches
Power button Turns the scanner on and off. When the power is
turned on, the scanner is initialized.
Start button Starts EPSON Creativity Suite. The button status
can be checked with [ESC !].
Figure 1-2. Locations of Switches and LEDs
Status LED
Start Button
Power Button

EPSON Perfection V700 Photo Revision A
Product Description Exterior Specifications 14
Explanation of LED Indicators
Status LED
Note *1: Warm-up, scan, initialization, etc.
*2: Certain error conditions, such as Option Error or Command Error, may not cause the
Status LED to turn red.
TPU lamp LED Lights up when the TPU lamp is on and moves with
(blue) the TPU Carriage.
External Drawing
Figure 1-3. External Dimensions of Perfection V700 Photo
Table 1-1. Scanner Status and LED Indications
LED Indication Status
Lit green Ready
Flashing green slowly Busy*1
Flashing red fast Error*2
20.1in (503mm)
12.3in (308mm)
6.1in (152.5mm)
1.92in (48mm)

EPSON Perfection V700 Photo Revision A
Product Description Control Codes 15
1.5 Control Codes
The following table is the list of control codes by the scanner.
Table 1-2. Control Code List
Category Command Name Code
Execution command
ID request ESC I
Status request ESC F
Extended status request ESC f
Status setting request ESC S
Scan start ESC G
Push Button status request ESC !
Extended ID request FS I
Scanner status request FS F
Scanning parameter request FS S
New scan start FS G
Data form setting
Data format setting ESC D i
Resolution setting ESC R n1 n2
Zooming setting ESC H i1 i2
Scanning area setting ESC A n1 n2 n3 n4
Color setting ESC C i
Mirroring setting ESC K i
Scanning parameter setting FS W
Correction processing
Brightness correction setting ESC L i
Gamma correction setting ESC Z i
Gamma correction table setting ESC z i d [256]
Sharpness control setting ESC Q i
Image processing
Halftone process setting ESC B i
Auto area segmentation setting ESC s i
Dither pattern setting ESC b i j d [j^2]
Color correction setting ESC M i
Download color correction setting ESC m d [9]
Threshold value setting ESC t i
Support and
Miscellaneous
Scan mode setting ESC g i
Initialization ESC @
Line counter setting ESC d i
Option control ESC e i
Film type designation ESC N i
Focus position setting ESC p i
Focus position request ESC q
Warm-up cancel ESC w
Paper loading PF
Paper exit FF
Control
Normal response ACK
Abnormal response NACK
Scanning stop CAN
Header STX
Table 1-2. Control Code List
Category Command Name Code

EPSON Perfection V700 Photo Revision A
Product Description Error-Time Processing 16
1.6 Error-Time Processing
Table 1-3. Error Definition and Remedy List
Category LED Indication Cause Scanner response Recovery Receivable Command
Command error None
An invalid command or invalid
command parameter was detected.
• The scanner ignores the incorrect command
or parameter. Current setting maintained.
• The scanner returns NACK and waits for
the next command parameter.
The error condition is cleared when the
scanner receives a valid command.
Fatal error Red LED flashes rapidly.
• The lamp is burnt out.
• The main unit is faulty.
• Firmware downloading failed.
• The scanner was turned on without
releasing the carriage lock.
• The scanner turns the carriage lamp off and
stops the operation.
• The scanner sets Bit 7 of the status bit.
• Turn the scanner off and then back on.
• Send an initialization command (ESC @)
to the scanner. ESC F, ESC f,
ESC @, FS F

EPSON Perfection V700 Photo Revision A
Product Description Maximum Document Size and Placement 17
1.7 Maximum Document Size and Placement
Reflective document
Size: 8.5in (216mm) W x 11.7in (297mm) H
Figure 1-4. Reflective Document Scanning Range
Transparent document
Standard size: 5.9in (149mm) W x 9.74in (247mm) H
Figure 1-5. Transparent Document Scanning Range (Standard)
8.5in (216mm) 1.5 ± 0.8mm
1.5 ± 0.6mm
11.7in (297mm)
Scanning home position
Front
5.9in (149mm) 34.52 ± 1.5mm
13.95 ± 1.5mm
9.74in (247mm)
Scanning home position
Front

EPSON Perfection V700 Photo Revision A
Product Description Maximum Document Size and Placement 18
Transparent document
Maximum size: 8in (203mm) W x 10in (254mm) H
Figure 1-6. Transparent Document Scanning Range (Max)
8in (203mm) 8.0 ± 1.5mm
21.6 ± 1.5mm
10in (254mm)
Scanning home position
Front

CHAPTER
2
OPERATING PRINCIPLES

EPSON Perfection V700 Photo Revision A
Operating Principles Engine Operation Outline 20
2.1 Engine Operation Outline
This section explains the functions and operating principles of the
EPSON Perfection V700 Photo Scanner. This model has two scanning
engines, the Photo scanner in the unit base and the TPU scanner in the
lid, each consisting of a Carriage Unit and a Carriage Mechanism.
2.1.1 Carriage Unit
The Carriage Unit consists of the ISN Board, Inverter Board, Lamps
(light source), Mirror/Lens Mechanism, Glass Plate, and Solenoid.
See Figure 2-1, and Figure 2-2.
Figure 2-1. Carriage Unit Configuration
ISN Board contains the alternating six-line color CCD (R, G, B
independent) sensor, and its control and drive circuits.
Inverter Board converts DC to AC and boosts the voltage to generate
the current necessary to power the Lamps.
Lamps used as the primary light source are white cool-cathode
fluorescent lamps. If the light output becomes unstable, the Panel LED
flashes and the scanner enters standby mode until it becomes stable.
Mirror/Lens mechanism. The lamp light reflected off the scanned
document passes through the Mirror/Lens mechanism in the Carriage
Unit for correction of the beam axis before it reaches the CCD Sensor.
The R, G, and B light components are extracted by the processing
capabilities of the Color CCD Sensor itself, not by switching between
the R, G and B of the light source as in other models.
Glass Plate compensates for the wavelength difference between the
infrared light and visible light when the Digital ICE function is used.
Solenoid moves the Glass Plate into or out of the beam path, as
applicable.
Figure 2-2. Mirror/Lens Mechanism
ISN Board
Inverter Board
CCD Sensor
Front
Rea
r
Lamps
Mirror1Mirror3
Document
LampLamp
Glass Plate Solenoid
ISN Board
CCD Senso
r
Front Rear
Scanned image
Mirror2
Mirror4
High Resolution Lens*2 Supper Resolution Lens*1
NOTE*1,2: Perfection V700 Photo is equipped with two types of lens which enable two
different resolutions. Depending on document type selected, one of the two
lenses is automatically selected.