Ergo PrimeCables Cab-PC-08256 User manual

Screw (M6x50) x1
Allen key (M4) x1
Washer x1
Model: Cab-PC-08256 / Cab-PC-08258
Note! Adult installation, keep children away!
Try to avoid directly sunshine on surface for a long time.
3. When in storage status, it should be covered with dust-proof and strong light-proof packaging materials and stored in a
dry and ventilated indoor environment.
kids under 5 years old
Note!
prevent from
Don't use charis on steps
or ladders！

1. Take out the left/right armrest and seat cushion
from the packing box, and fix the armrest with 6
M6*35MM screws.
2. Press the button to assemble the seat back
to the support tube.
1. W 2.Insert the support tube, take out the M6*50 screw
and washer from the screw package, and lock the
bottom of the support tube.
hen the seat cushion height is not enough, turn
on the seat cushion lift switch to adjust the height.
3. Pull off the knob of the assembled seat cushion,
then insert the seat cushion into the supporting tube
rotating ferrule to fix.
4. Insert the whole assembled thing into the holes
on the plate of casters, the tighten them with
M6*65 screws.
Installation Instruction (Subject to actual size
3. The backrest can be adjusted appropriately. 4.The seat cushion can be adjusted by sliding
back and forth.
5. When the casters are subjected to gravity, they
will stop and will not move.
(Subject to actual size)
Function Instruction