Great Little Trading L4772 User manual

1
Bodmin Playtable
29/05/2020
V2
easy - medium - hard
Assembly Difculty
one-person job
L4772
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Please read these instructions carefully before assembly.
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Not suitable for children under 3 years due to small parts that may
become detached and present a choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Assemble and use on a at and level surface.
• Adult assistance will be required to change over the table top.
• To avoid possible injury from tipping - DO NOT allow children to sit,
step or climb on the product.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check item regularly for signs of damage which may make the product
unsafe.
• Check all xtures and ttings regularly and tighten as necessary.
• DO NOT use this item if any components are missing or damaged.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
You will need
(not supplied)
Phillips Head
Screwdriver
A B
C D
1x LH Side Rail
#1
2x Cam Dowels
35mmL
8x Wooden Dowels
25mmL
#2
#3 #4
E F
G H
#5 #6
8x Bolts
40mmL
8x Barrel Nuts
10mm dia
2x Cam Locks
15mm dia
1x RH Side Rail
1x Base Support Bar 2x Base Panels
1x RH Play Surface Panel 1x LH Play Surface Panel
1x LH End Panel 1x RH End Panel

4
Hardware for Step 1:
2x #1 Cam Dowels
STEP 1:
Using a Phillips Screwdriver, insert 1x cam dowel (#1) into the central hole on
BOTH side rail panels A & B.
Hardware for Step 2:
4x #2 Wooden Dowels
STEP 2:
Take panel B and insert 2x wooden dowels (#2) in the remaining central holes
and then push support base panel C onto the hardware.
Insert 1x cam lock into the large drill hole on panel C at the connection point
and turn clockwise to lock.
Repeat this step at the other end of panel C, joining it to panel A.
A
B
#1
#1
#1
A
B
C
#3
#3
#2
#2
#2
#2
2x #3 Cam Locks
#3
#2
Using Cam Locks:
When inserting into the panel, ensure that each
cam lock’s arrow is pointing towards the drill
hole on the side edge of the panel & the dowel
that it will be receiving.
When the panels are in the connected position,
using a screwdriver, turn the cam lock in a
clockwise direction to lock and secure.
The larger drill holes of
panel C to be facing up.

5
Hardware for Step 4:
STEP 3:
Slide both base panels (D) into the groove of the side panels. It may be easier
to slide each panel in from different ends.
STEP 4:
Carefully, turn the unit on its side,
Take both end panels E & F and insert 1x wooden
dowel into the central drill hole on BOTH sides of
EACH panel.
Take panel E and push into position on the ends of
the side rails (A & B), lining up the groove with the
base board.
D
D
A
CB
E
#4
#4
#4
#4
#4
#4
#4
#4
#2
#2
#2
#2
#2
#5
x2
x2
x2
#5
x2
4x #2 Wooden Dowels
8x #4 Bolts
8x #5 Barrel Nuts
Now insert 2x barrel nuts (#5) into
the holes on the side rail resting on
the oor, ensuring holes are facing
the bolt it is about to receive. Then
insert 2x bolt (#4) and tighten with
a phillips screwdriver to secure.
Now insert the barrel nuts (#5) and bolts (#4) for the elevated side rail. You will
have to do these one at a time, holding the barrel nut in place whilst you secure
the bolt.
Repeat this step with panel F.
Footed part of the
end panels to be facing
away from the at side
of the play table.
#5
F
#5
#5
#4

6Copyright© 2020 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
STEP 5:
Once all the bolts on the end panels are fully secure, carefully turn the play table
over and insert the play surface panels G & H.
Your unit is now complete.
G
H