Ergo PrimeCables Cab-PC-08453-BK User manual

50KG
725mm
1175mm
1200mmx600mm
10%（Work continuously for 2 minutes,
2
Ex1 Fx4
Ax4Bx4 Cx11 Dx8
15mm/s
Or
No. Part
Transmission Rod x1
①Pedestal x2
Handset x1
Baffle x1
Power Plug x1
⑥
⑦
⑧
⑨
⑩
Tabletop x1
②
③
④
⑤
Bracket x2
Left Lifting
Column x1
Right Lifting
Column x1
Supporting Beam x1
1
Gx2
4x4 2.5x2.5
①
⑥
②
③
④
⑤
⑦
⑧
⑨
⑩
Ex1
4x4
x8
D
Ex1
4x4
Fx2
x2
B
Installation guide
< The pictures below are for reference only, please refer to the actual product. >
Please read this product manual carefully before use, and keep it properly.
Install on carpet to prevent scratches. Bring your own pistol drill.
Need two or more people to cooperate together.
Note: The line drawings below are for reference only and may differ slightly from the physical product in some
cases. Please refer to the actual product for accuracy. If any tools are missing or there are problems with
installation, please contact customer service.
Product List
Accessory List
Preparation before installation
Max. Load Capacity
Lowest Height
Column Stage
Tabletop Size
Max. Speed
Highest Height
Usage frequency then pause for 18 minutes.）
Technical Data
Damping Pad x9
Cable Clip x4
Part List
Installation Instruction
Installation Steps
STEP1 Install the Pedestals
STEP2 Connect the Left Lifting Column
to the Beam
No. Part
Cab-PC-08453-BK
Cab-PC-08455-WH

x2
D
2
客户自备
x4
A E x1
4x4
1 1
2 2
Ex1
2.5x2.5
x2
B E x1
4x4
Fx2
x9
C
STEP3 Install the Transmission Rod STEP4 Insert the Transmission Rod into the Right Lifting Column STEP5 STEP7 Install Damping Pads
STEP6
Please make sure to keep the height
of the left and right columns consistent
when installing.
Insert
The rotation degree should
not exceed 1/3 turn.
Tighten
Insert
Rotate
STEP8 Install the Tabletop
Install Brackets
Connect the Right Lifting
Column to the Beam
Self-prepared

Up button
Down button
x2
C
x2
G
Peel
Organize
Fix
Use cable clip(11) to secure
the cables to the tabletop and keep them tidy
安装步骤五 安装桌板、手控、挡板
客户自备
x2
G
螺钉安装顺序为
x11
C
3
Self-prepared
Self-prepared
STEP9 Install the Handset
STEP10 Install the Baffle
STEP11 Install and Route Power Cord
Connect the power after completing
the wiring.
Attention Please make sure that there are no obstructions during the ascending and descending
process of the desk, and all cables are long enough for the desk to go up and down.
Handset control method and setting
Height adjustment function:
You can adjust the height of the standing desk
up or down by pressing the " " or " " keys.
This list is used for checking and solving common faults and errors. Please
contact the manufacturer if problem you encounter is not on the list below.
Solution
Problem
No response when pressing
the UP or DOWN button
Speed of lifting is slow
Check the cable connection
Check if the load weighs
more than 50kg
(Max. Load capacity: 50kg)
The worksurface slides downward
Attention
This marking indicates that this product should not be disposed with
other household wastes. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems.
1. Power supply: AC100V-240V, 50/60Hz
2. Service Environment: 0-40°C
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet dishcloth when
cleaning, be careful not to let the drops into the internal parts, not loose the connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so dispose of it in
accordance with each country's environmental legislation, not the general household waste.
5. Check carefully to ensure correct and complete assembly before using.
6. Be familiar with all functions and program settings of the product before first use.
7. Children are forbidden to play on the product because of unforeseen action when playing, so any
dangerous consequences caused by this improper action will not be on manufacturers.
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not have any effect
on the use of the equipment.
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure that the
cleaner used will not pollute the environment.
10. This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
11. Cleaning and user maintenance shall not be made by children without supervision.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a
similarly qualified person in order to avoid a hazard.
13. Please make sure there is no hazard sources in your operating environment. e.g., do not litter
the tools around. Always be careful to treat the packaging materials in order to avoid any possible
danger, e.g. plastic bag may lead to choking hazard to children.
14. When more than two people are moving the product, please make sure that there is nothing on
the table. And close the drawers, doors, etc., also confirm that the screws are not loose, and unplug
the power plug. If necessary, please keep the original packaging of this product in case you need to
use it for future transportation.
15. When storing for a long time, please unplug the plug, clean up the items that are easy to fall,
and store it in a cool and dry place.
Resolving Common Issues