Espressione i1105 User manual

1
2
3
4
5
6

When using electrical appliances, basic safety precauons should
always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THE MACHINE.
To protect against electrical shock, do not immerse the
cord, plug or the appliance in water or in any other liquid.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilies, or lack of experience and knowledge, unless
they are closely supervised and instructed concerning use
of the appliance by a person responsible for their safety.
Close supervision is necessary when any appliance is used
by or near children. Children should be supervised to ensure
that they do not play with the appliance.
Unplug from outlet when not in use, before pung on and
taking off parts, or before cleaning. To unplug, grasp the plug
and pull from the outlet. Never pull from the power cord.
Do not use appliance for other than intended use.
Avoid contacng moving parts.
Do not operate any appliance with a damaged cord or plug
or aer the appliance malfuncons, has been dropped or
damaged in any manner. Return the appliance to the
nearest authorized service facility for examinaon, repair or
electrical or mechanical adjustment.
The use of aachments not recommended or sold by the
appliance manufacturer may cause fire, electric shock
or injuries.
Do not use outdoors.
Do not let cord hang over edge of table or counter, or touch
hot surfaces.
Check bean hopper for presence of foreign objects before
using.
This appliance has a polarized plug (one blade is wider than
the other). As a safety feature, this plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet
reverse the plug. If it sll does not fit, contact a qualified
electrician. Do not aempt to defeat this safety feature.
This appliance is for household use only.
Do not place on or near a hot gas or electric burner or in a
heated oven.

The cells shall be disposed of properly, including keeping
them away from children, even used cells may cause injury.
WARNING: Chemical Burn Flazard. Keep baeries away from
children. This product contains a lithium buon/coin cell
baery. If a new or used lithium buon/coin cell baery is
swallowed or enters the body, it can cause severe internal
burns and can lead to death in as lile as 3 hours. Always
completely secure the baery compartment. If the baery
compartment does not close securely, stop using the product,
remove the baeries, and keep it away from children. If you
think baeries might have been swallowed or placed inside
and part of the body, seek immediate medical aenon.
Before using your appliance for the first me, wipe the stainless
steel bowl, blade, hopper and cover with a damp cloth. Allow to
dry completely before using.
*Remove cover and place coffee beans into the stainless steel
bowl. Do not exceed 50 grams. of beans weighed at a me.
Place the cover on the appliance.
Plug in the appliance.
Hold the unit with one hand and make sure the cover is
securely in place, press the buon on the cover to switch-on
with the other hand. To stop it, simply release the buon.
Do not remove the cover before the blades have stopped
rotang.
DO NOT IMMERSE THE MOTOR BASE IN WATER.
DO NOT PLACE THE APPLIANCE IN THE DISHWASHER.
Before cleaning, unplug the appliance from electrical outlet.
Wash the cover in warm and soapy water. Rinse and dry it
completely.
Wipe the blades, stainless steel bowl, exterior and motor
base with a damp cloth or paper towel to remove any excess
ground coffee.
Any other servicing should be performed by an authorized
service representave.

15
seconds on.
exactly the grind you prefer for the coffee.
When the blades have stopped, unplug the unit. Remove the
lid and the ground coffee.
5
1. ON/OFF SAFETY SWITCH
2. LED INDICATOR
3. SMART LID
4. STAINLESS STEEL GRINDING BOWL
5. BLADE
6. BATTERY (CR2032 3V)
(CR2032 3V) got full power. Please understand that the app is
a client for coffee grinder, it does not work alone.
Open i1105 app on your smartphone
BATTERY INSTALLATION
6

Press the buon to connect
i1105 with your smartphone
(ensure Bluetooth enabled)
The app is searching your
i1105 device
Put the lid on flat surface
with opening facing up
Select funcon “Grind” or
“Measure”
5

Grind: Once you press “Grind”, select your flavor of strength
and fineness and number of cups
Measuring beans according to your flavor, put beans in the lid
6
Please note: if overload capacity, beer take away a lile bit!
Keep going Almost there
Perfect

Measure: Other than “Grind”, you can select “Measure” to
weigh something else as almond, walnut, etc. with your cover.
7
Put the bean into the
grinder, then ready to grind
Grinding completed, you
can enjoy your coffee
Troubleshoong
· Do ensure baery got full power.
· If your smartphone cannot search your device, you can quit the i1105 app and remove
baery from the device and restart above from step 1. Enjoy your coffee with our i1105!

8
FCC ID: 2AM66-M6192U-M6196U
FCC Warning
Warning: Changes or modificaons to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
TRADEMARKS
Product names menoned in this manual may be trademarks
or registered trademarks of those products.
All trademarks or brand names menoned are properes of
their respecve companies.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instrucons, may cause harmful
interference to radio communicaons.
However, there is no guarantee that interference will not occur
in a parcular installaon.If this equipment does cause harmful
interference to radio or television recepon, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separaon between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for
help.