ESYLUX DEFENSOR MD 200 24 IR 1C IP55 WH User manual

OPERATING INSTRUCTION
DEFENSOR
• MD 200°
• MD 230°
• MD 280°
OUTDOOR AUTOMATION IGB
MOTION DETECTOR

GB
© ESYLUX GmbH
An der Strusbek 40, 22926 Ahrensburg, Germany
Details may be subject to change.
Copying is only permitted with the written consent of ESYLUX GmbH. This includes translation into
other languages and reuse of content for other purposes.
MA01708100
2 / 44
Version Date Comment
MA01708100 14/04/2020 First edition

GB
MA01708100
3 / 44
Table of contents
1. Information about the document 5
1.1 Introduction ....................................................................................................5
1.2 Highlighted information within the text................................................................5
1.3 Manufacturer address.......................................................................................6
1.4 Productidentication .......................................................................................6
1.5 Warnings.........................................................................................................7
2. Basic safety information 8
2.1 Safety instructions ...........................................................................................8
2.2 Intended use ...................................................................................................8
2.3 Liability and damages.......................................................................................9
3. Product description 9
3.1 Introduction ....................................................................................................9
3.2 Included in delivery ........................................................................................10
3.3 Settings – an overview .................................................................................... 11
3.4 Mechanical set-up..........................................................................................12
3.5 Rating label...................................................................................................13
3.6 Dimension drawing.........................................................................................13
3.7 Fields of detection .........................................................................................14
4. Installation and connection 16
4.1 Installation .................................................................................................... 16
4.2 Connection....................................................................................................20
4.2.1 Standard operation.............................................................................21
4.2.2 Standard operation with additional control using a push button................21
4.2.3 Parallel connection.............................................................................21
5. Initial operation 22
5.1 Warm-up phase .............................................................................................22
5.2 Default settings .............................................................................................22
6. ESY Control app and ESY-Pen 23
6.1 Operating principle.........................................................................................23
6.2 ESY Control app ............................................................................................24
6.3 Connecting the ESY-Pen to the ESY Control app ................................................25

GB
MA01708100
4 / 44
7. Settings with the ESY Control app 26
7.1 Temporary settings.........................................................................................26
7.1.1 Light on / off .....................................................................................26
7.1.2 4 h / 12 h light on / off.......................................................................27
7.1.3 Reset to automatic mode ....................................................................28
7.2 Permanent settings ........................................................................................28
7.2.1 Set time and date ..............................................................................28
7.2.2 360 degree crawl protection on / off.....................................................29
7.2.3 Operating mode .................................................................................29
7.2.4 Brightness switching value...................................................................33
7.2.5 Switch-off delay time..........................................................................34
7.2.6 Motion sensor sensitivity .....................................................................35
7.2.7 Detector LED on / off..........................................................................36
7.2.8 Reset to default settings .....................................................................37
7.2.9 Test mode.........................................................................................37
7.2.10 Password protection ...........................................................................37
8. Manual control via push button 38
9. Maintenance 40
9.1 Cleaning .......................................................................................................40
9.2 Troubleshooting .............................................................................................40
10. Technical data 41
11. Disposal 44
12. EU Declaration of Conformity 44
13. ESYLUX manufacturer's guarantee 44

GB
5 / 44
MA01708100
Information about the document
1. Information about the document
1.1 Introduction
These operating instructions contain detailed information about the
installation,commissioningandcongurationofthespecieddevices.
This document is available online on the relevant product web page
at www.esylux.com and can be printed out in A4 format. Please read
the operating instructions carefully and note all safety information and
warnings.
When you are reading the document on screen, you can use the following
functions:
• Linked table of contents: Clicking on the chapter title opens the
corresponding chapter.
• Linked references:Youcannavigatetospeciedlocationsby
clicking on the link .
• List of bookmarks: All chapters can be accessed from the list of
bookmarks inthesoftwareyouusetoviewPDFles.
1.2 Highlighted information within the text
To make these operating instructions easier to read, certain information is
highlighted by different means. The meaning of this formatting is explained
below:
¾ indicates a call for action
9 indicates results of actions
< > indicates menu items of the app
 indicates text links
indicates important and useful information
warns of high voltage
Navigating on
screen
Formatting

GB
6 / 44
MA01708100
Information about the document
1.3 Manufacturer address
ESYLUX GmbH
An der Strusbek 40
22926 Ahrensburg I Germany
[email protected]
www.esylux.com
1.4 Product identication
These instructions apply to the following products:
Item number Product name
EM10025358 DEFENSOR MD 200° 24 IR 1C IP55 WH
EM10025365 DEFENSOR MD 200° 24 IR 1C IP55 AN
EM10025372 DEFENSOR MD 230° 40 IR 1C IP55 WH
EM10025389 DEFENSOR MD 230° 40 IR 1C IP55 AN
EM10025396 DEFENSOR MD 280° 40 IR 1C IP55 WH
EM10025402 DEFENSOR MD 280° 40 IR 1C IP55 AN
Youcanndtheitemnumberandproductnameonthetypeplateofthe
products in chapter "3.5 Rating label" on page 13.
The product name contains important information about the product:
Elements Meaning
DEFENSOR Series
MD Motion detectors
200° / 230° / 280° Sensing range
24 / 40 Field of detection width in metres Ø
IR Remote controllable (infrared)
1C 1 light channel
IP55 Protection type
WH White (housing colour)
AN Anthracite grey (housing colour)

GB
7 / 44
MA01708100
Information about the document
1.5 Warnings
Warnings are listed at the start of the relevant chapter if a hazardous
situation is likely to occur.
The preceding signal words have the following meanings:
DANGER!
This signal word denotes a hazard involving a high level of risk. Failure to
observe the warning will lead to serious or fatal injury.
WARNING!
This signal word denotes a hazard involving a moderate level of risk. Failure
to observe the warning may lead to serious or fatal injury.
CAUTION!
This signal word denotes a hazard involving a low level of risk. Failure to
observe the warning may lead to minor or moderate injury.
NOTE!
This signal word warns against situations that could lead to instances of
property damage if the information is not observed.

GB
8 / 44
MA01708100
Basic safety information
2. Basic safety information
2.1 Safety instructions
Electrical devices connected to a 230-V mains voltage must only be
installed and commissioned by electrical installation technicians or trained
electricians,takingcountryspecicregulationsintoaccount.
DANGER!
Risk of fatal injury from electric shock!
¾ Thefollowingvesafetyrulesmustalwaysbeobserved:
1. Disconnect the power supply
2. Secure the power supply from being switched on again
3. Check that the relevant components have been de-energised
4. Set up the earthing and short-circuiting mechanisms as required
5. Cover or isolate neighbouring live parts
¾ Protect the device with a 10-A circuit breaker.
¾ Protect the circuit with a residual current device (RCD).
¾ Observethecontactopeningwidth(μ=<1.2mm).
2.2 Intended use
The motion detectors from the DEFENSOR series are designed for use in
outdoor areas and use passive infrared technology (PIR). They react to
moving heat sources (persons, vehicles) and are suitable for use around the
home, and in gardens, garages or carports.
TheMD200°isdesignedforwallmounting,whiletheMD230°and
MD280°variantscanalsobemountedontheceiling.Surfacemounting
or mounting on inner / outer corners is possible with the appropriate
accessories.
Specialist
personnel
Place of use

GB
9 / 44
MA01708100
Product description
2.3 Liability and damages
Thedevicemustnotbechanged,modiedorpainted–doingsowillvoid
any warranty claims.
The manufacturer will not accept any liability for instances of personal
injury or property damage caused by improper use.
Check the product for damage after unpacking. If the device is damaged in
any way, return it to the relevant place of sale.
3. Product description
3.1 Introduction
The motion detector automatically controls the lighting based on motion
and ambient light conditions. If the motion detector detects movement
withinitseldofdetection,itswitchesontheconnectedlightingforan
adjustableperiodoftimeinaccordancewiththeconguredbrightness
switching value.
Main product features:
• Sensing range of 200°, 230° or 280°
• Detectionrangewidthof24m/40mindiameterat
aninstallationheightof3m
• The detector is supplied with the default settings /
fully automatic mode
• With zero-cross switching for load-free switching of the
connected devices
Properties

GB
10 / 44
MA01708100
Product description
The following table shows an overview of the functions of the devices:
Functions MD 200° MD 230°
MD 280°
Time-dependent operating modes •
Intelligent vandalism and
sabotage protection •
Crawl protection for unbroken coverage •
Switch-off delay times based on motion
direction detection •
Customisableeldsofdetection • •
Impulse feature • •
Integrated push button input • •
Zero-cross switching to protect the relay • •
Password-protected parameterisation • •
High overvoltage protection • •
CongurableviatheESYControlapp
and ESY-Pen • •
3.2 Included in delivery
1x motion detector
1x lens mask
1x short instruction
Optional accessories:
ESY-Pen (item no. EP10425356)
Spacer (item no. EM10025426)
Corner bracket (item no. EM10025419)
Overview of
features
Accessories

GB
11 / 44
MA01708100
Product description
3.3 Settings – an overview
The motion detector has no setting elements. All settings can only be
modiedusingtheESYControlappandtheESY-Pen.
Settings Description
Light on / off
Used to manually switch lighting on or off
regardless of movement and ambient light
conditions
4 h / 12 h light on / off
Used to manually switch lighting on or
off for 4 hours or 12 hours regardless of
movement and ambient light conditions
Reset to automatic mode Used to reset temporary settings
Set time and date Used to set the date and time in order to
use time-dependent functions
360 degree crawl
protection on / off
Usedtoswitchtheeldofdetectiondirectly
underneath the motion detector on or off
Operating mode
fully automatic
Enables automatic light control in the event
of detected movement
Operating mode
semi-automatic
Enables automatic light control in the
event of detected movement once activated
manually using an external push button
Operating mode
twilight switch
Enables motion-independent light control on
the basis of the brightness switching value
Operating mode
light on / off
Used to manually switch lighting on or off
regardless of movement and ambient light
conditions
Brightness switching value
The lighting is automatically controlled
onthebasisoftheconguredbrightness
switching value
Switch-off delay time
Usedtocongurehowlongthelighting
remains switched on after movement is
detected
Motion sensor sensitivity Used to adjust the sensitivity and range of
motion detection
Detector LED on / off Used to switch the illumination of the
detector LED as a form of feedback on or off
Operation via
ESY Control app
with ESY-Pen

GB
12 / 44
MA01708100
Product description
Settings Description
Reset to default settings Used to reset the motion detector to
default settings
Test mode Usedtotesttheeldsofdetectionofthe
motion detector
Password protection Used to set a password to protect against
unauthorised access
Youcanndacomprehensivedescriptionofthepossiblesettingsin
chapter "7. Settings with the ESY Control app" on page 26.
3.4 Mechanical set-up
MD 200° MD 230° / MD 280°
1. Sensor
2. Sensor unit
3. Mounting base

GB
13 / 44
MA01708100
Product description
3.5 Rating label
1. Product name
2. Item number
3. Technical data
3.6 Dimension drawing
108 mm
92 mm 108 mm
MD 200°

GB
14 / 44
MA01708100
Product description
MD 230° / MD 280°
3.7 Fields of detection
The motion detector is most sensitive to crosswise movements and detects
theseuptothespeciedmaximumrange.Thereisareducedrangeforthe
reliable detection of movements that are head-on to the detector.
The greater the installation height, the larger the detection range, but the
lowerthesensitivity.Thespeciedeldsofdetectionapplyforanambient
temperatureofapprox.25°C.
• Detection angle 200° / 230° / 280°
• Installationheight3m(max.5mforMD200°,
max.6mforMD230°/MD280°)
MD 200° ø m
Diagonally (A) 24
200°
B
A
Head-on (B) 8

GB
15 / 44
MA01708100
Product description
MD 230° ø m
Diagonally (A) 40
230°
B
A
C
Head-on (B) 10
Crawl protection (C) 4
MD 280° ø m
Diagonally (A) 40
280°
B
A
C
Head-on (B) 10
Crawl protection (C) 4

GB
16 / 44
MA01708100
Installation and connection
4. Installation and connection
4.1 Installation
The motion detector is designed for wall and ceiling mounting
(ceilingmountingonlysuitableforMD230°/MD280°).
The motion detector must be mounted on a solid, even surface
(wall / ceiling). Surface mounting or mounting on inner / outer
corners is possible with the appropriate accessories.
Wall mounting Ceiling mounting (MD 230° / MD 280°)
The following installation types are possible with accessories:
Wall mounting with spacers in the case of surface-mounted cabling
Installation
type / location

GB
17 / 44
MA01708100
Installation and connection
Mounting on outer corners with a corner bracket
NOTE!
In order to prevent chipping due to bore holes that are at too much of an
angle, observe the positioning of the screws.
Mounting on inner corners with a corner bracket
Installation instructions:
¾ Position the motion detector in a location that is appropriate for
the spatial conditions and requirements.
¾ When installing the device, consider the surrounding area, e.g.
neighbouring properties and the distance to the road.
¾ Ensureconnectedlightingismountedwithsufcientclearance
from the motion detector or is mounted above it to avoid any
interference with the light sensor.
¾ Do not point light sources directly at the motion detector
When selecting an installation location, make sure that the
motion detector has a clear line of sight, as infrared beams
cannot penetrate solid objects.

GB
18 / 44
MA01708100
Installation and connection
DANGER!
Risk of fatal injury from electric shock!
¾ Switch of the mains voltage before installing / removing the detector.
¾ Check that the mains voltage is de-energised.
Installation steps:
¾ Disconnect the sensor unit from the mounting bracket. These are
connected via a plug-in connection.
¾ Feed the cable into the detector and install the mounting base in
the required position.
The distances between the screw holes are compatible with
those of the RC series of outdoor motion detectors from ESYLUX.
The distances between the screw holes are suitable for
conventionalrecessedboxes(60mm).

GB
19 / 44
MA01708100
Installation and connection
After connecting the motion detector:
¾ Connect the cables between the sensor unit and the mounting
base.
When connecting the cables, ensure that the red wire is at the top.
Connecting the sensor unit and mounting base:
¾ Press the sensor unit onto the mounting base.
9 A"click"noiseatthetopandbottomconrmsthatthey
havebeenproperlyxedtogether.
¾ Then tighten the screws.

GB
20 / 44
MA01708100
Installation and connection
¾ Adjust the motion detector to the spatial conditions by horizontally
or vertically aligning the moveable lens (MD 200°) or the sensor
head (MD 230° / MD 280°).
MD 200° MD 230° / MD 280°
Theeldofdetectionofthemotiondetectorcanalsoberegulatedmechanically
usingthesuppliedlensmask.Youcanndothersettingstoadjusttheeld
of detection in chapter "7.2.6 Motion sensor sensitivity" on page 35.
4.2 Connection
DANGER!
Risk of fatal injury from electric shock!
¾ Switch of the mains voltage before connecting the product.
¾ Check that the mains voltage is de-energised.
Proceed as follows to connect the motion detector:
¾ Observe the following circuit diagrams and terminal assignments.
LExternal conductor, 230 V ~
L’ Switched external conductor 230 V~
NNeutral conductor
SPush button
Aseparateterminalisalsoavailabletoloopthroughorxtheearth
conductor.
Earth conductor
Terminal
assignment