Etac Immedia E-Board L IM404 User manual

Instruction for use
E-Board L
IMM1021_IFU.Version6.2018-11-01
Positioning Sitting
Sit to stand
Special solutions
Support
Transfer horizontal
Transfer sitting
Positioning Horizontal

2
Index
Illustrations ...........................................3
User manual – English .........................4
Bruksanvisning – Svenska...................9
Bruksanvisning – Norsk .....................14
Brugervejledning – Dansk..................19
Käyttöohjeet – Suomi.........................24
Gebrauchsanweisung – Deutsch ......29
Gebruiksaanwijzing – Nederlands.....34
Instruction d’utilisation – Francais....39
Istruzioni per l’uso – Italiano .............44
Instrucciones de uso – Español ........49
See www.etac.com

ES IT FR NL DE FI DA NO SV GB ILL.
3
Illustrations
30°
max 20
cm
1 2 3
4 5 6
7 8

4
General
Thank you for choosing an Etac product.
Intended use
Intended environment
E-Board can be used to transfer users from wheelchair to bed,
bath/commode, car seat, etc. and vice versa.
Acute care, Long-term care, Home care
To avoid accidents and injury when moving and handling the
products, please read this manual carefully.
The person described as “the user” in this “Instruction for Use”
is the person who is lying or sitting on the product. The carers
are the people who manoeuvre the product.
This symbol appears alongside the text in the
manual. It draws the reader’s attention to points at
which there may be a risk to the health and safety
of the user or carer.
These products comply with the standards applicable for Class 1
products in the European Council Directive MDD 93/42/EEC on
medical devices.
At Etac we strive to continually improve our products and
therefore we reserve the right to make changes to products
without prior warning. All measurements given on illustrations
and similar material are for guidance only and Etac cannot be
held liable for errors and defects.
The information given in this manual, including
recommendations, combinations and sizing, does not apply
to special orders and modications. If the customer makes
adjustments, repairs or uses combinations not predetermined
by Etac, the Etac CE certication and Etac warranty will not be
valid. If in doubt, please contact Etac.
Warranty: Two-year warranty on material and manufacturing
defects, provided that the product is used correctly.
For further information on the Etac transfer range,
see www.etac.com.
The product can be scrapped in accordance with national
regulations.
Symbols in general
Washing pH level Read the user manual
User mass limit =
maximum rated load
Do not bleach Wipe off Warning
The product can be
scrapped according to
national regulations
Tumbledry Never leave on the oor
Production year, month
and day Manufacturer
Iron Risk of sliding down Batch no./Lot no.
Class 1 - European
Council Directive MDD
93/42/EEC on medical
devices
Do not dryclean Keep out of the sun

5
ES IT FR NL DE FI DA NO SV GB ILL.
Practical handling
Position the wheelchair at an angle of about 30° to the bed.
Position E-Board so that the grey non-slip strips on the back
lie securely against the wheelchair seat and the surface of the
opposite surface.
Positioning is easier if the user either leans against the direction
of movement or shufes him/herself sideways on the mattress
until he/she is seated on the glide board (Illustrations 1-4).
Positioning
Use
The user can now slide/“shufe” slowly over into the
wheelchair by pushing him/herself away from the mattress
(Illustrations 5-7).
Depending on the user’s resources, the carer can guide the
user, supporting the upper body, possibly using SupportBelt,
SmartMove or Sling.
Tips
If an angle is created (e.g. if the bed is slightly higher than the
wheelchair), the user will slide more easily from one to the other.
In connection with manual handling, it will often be an advantage
to use a PediTurn turnplate for the feet and SupportBelt.
To remove E-Board, the user moves his/her weight away from
the glide board, lifts and then pulls it free (Illustration 8).