ETEKCITY EDT-1USA User manual

4. Press a second time, and the days at
the top of the display will start to flash. Use
or to select the desired day.
Digital Timer Outlet
First Time Set Up
QUICK START GUIDE
Model No.: EDT-1USA
1. First Time Set Up 2. Setting Up the Clock 3. How to Program a Timer
Questions or Concerns? [phone] • [e-mail]
1. Press and hold for 2 seconds until the hour digit starts to flash.
2. Once the hour digit starts flashing, press
or to select the hour.
NOTE: The default setting for the clock is 24-hour time
1
Plug in the timer outlet to a powered
electrical socket, and press the reset
button (R). The screen will turn blank,
then will show the reset display.
Setting Up the Clock
2
3. Press , and the minute digits will start to
flash. Press or to select the desired
minutes.
5. Press a third time, and the hour and
minute digits will start to flash simultaneously.
Press or until the “AM” or “PM”
symbol appears on the display; this indicates that
the clock is on 12-hour time.
6. Press when you have finished setting up the clock.
(See next page on how to set up the
Daylight Savings Clock & How to Program a Timer.)
NOTE: If the “AM” or “PM’ symbol disappears, then the clock is on 24-hour time.

5. To activate your programmed timers, press and
hold for 2 seconds until the “AUTO” symbol
appears on the display.
How To Program a Timer
3
Setting Up the Daylight Savings Clock
Other Features & Warranty
1. Press and hold for 3 seconds until the
“+1h” symbol appears on the display; this indicates
that the clock is now in daylight savings mode.
1. Press , and “1 ON --:--” will appear on the
display with the hour digit flashing. Press or
to set the desired hour.
2. Press to select the minute digits; the
minute digits will now be flashing. Press or
to select the desired minutes.
3. Press to select the days of the week; the
days at the top of the display will now be flashing.
Press or to select the desired days of
the week.
NOTE: The timer outlet must read “AUTO OFF” for the
programmed timers to activate. If the display reads
“ON,” press once and the display will now show
“OFF.” Once the display shows “OFF,” press and hold
the until the “AUTO” symbol appears.
2. To cancel the daylight savings mode, press and hold for 3 seconds until the
“+1h” symbol disappears.
Please read the full manual to learn more about the other
functions and features of your new digital timer outlet.
Customer Support
Should you encounter any issues or have any questions regarding your new product,
feel free to contact our helpful Customer Support Team. Your satisfaction is our goal!
Support Hours
Monday - Friday: 9:00 am - 5:00 pm PST
Phone: [phone]
Email: [e-mail]
3. Press when you have set the daylight savings clock.
4. Press to move onto the “1 OFF”timer.
Repeat steps 1-3 to set up your “1 OFF”timer.
Press once you have set up your timers.
NOTE: Repeat steps 1-4 to program up to 20 On & Off times.