26
ASSEMBLY AND OPERATING INSTRUCTIONS | e N EXHO-NT - HOME AUTOMATION
check the corresponding sections of this manual), eNEXHO ap-
plication will allow you to send the original names used during
the rst installation to future installations.
In order to complete this process please take the following
steps:
› Open both applications (the original device where the rst
installation took place and the new device). Make sure both
devices are connected to the same WI-FI network generated
by your installations router (the internet module eNEXHO-NT
must be connected to this router).
› In both devices, select the conguration menu in the ope-
ning screen of eNEXHOs application. In some versions of this
application this menu will appear as an icon in the shape of
a tool at the top left part of the screen. If this icon does not
appear, press the "Menu" button of your terminal. In the sub-
menu select "Conguration". If you haven’t deactivated the
password request button, this will be by default "nexho".
› Now press the "Communications" button in both terminals
› In the second device select the option "Receive data from
another application". eNEXHOs application in this terminal
will remain in a waiting mode.
› In the original device (where all the names of the zones have
been installed are saved) select the option "Send data to ano-
ther application".
› Now both applications will show the same names as the zo-
nes assigned originally.
How to reset the nexho application downloaded in my device?
Select the option "Initial Installation" from this menu. In some
of the versions of this application this option will show in an
icon with the shape of two crossed arrows at the top right hand
side of the application. If this icon is not there press the "Menu"
button in your terminal. In the Submenu that will come out se-
lect "Initial Installation".
How to set the time?
Please go to the main menu and press the "Communications"
button, once inside the communications menu press the "Send
time" button.
How to change the conguration passwords?
In order to access some of the menus within the eNEXHO appli-
cation a password is needed to. Password by default is "nexho".
If you want to change this password select from the opening
screen the Congurations menu. In some versions of this ap-
plication this menu will appear as an icon in the shape of a tool
at the top left part of the screen. If this icon does not appear,
press the "Menu" button of your terminal. In the submenu se-
lect "Conguration". If you haven’t deactivated the password
request button, this will be by default "nexho".
Now press the "Password" button and select the option
"Change conguration password".
Introduce the old password and accept. Introduce the new
password and accept. Repeat the new password and accept
again.
The password has now been changed.
How to deactivate the password request in NEXHO applica-
tion?
If you want to deactivate the password request of this applica-
tion, enter the conguration of the opening screen of eNEXHOs
application. In some versions of this application this menu will
appear as an icon with the shape of a tool at the top left part
of the screen. If this icon does not appear, press the "Menu"
button of your terminal. In the submenu select "Conguration".
If you haven’t deactivated the password request button, this will
be by default "nexho".
Now press the password button from the menu and deactivate
the options you want from the password request menu.
How to control your nexho installation from outside your
house through internet
The rst thing we will need is to have internet access from this
router. You will also need to have internet access from the de-
vice where you have downloaded the eNEXHO application when
connecting to your system.
Moreover you will need to congure your router so the eNEXHO
application is allowed to receive data from outside your local
network. To make this possible you will need to congure a
"Port forwarding" in your installation router.
From a computer connected with a cable to the router, access
your routers conguration menu. This is possible by inserting
the routers direction in your browsers navigation menu (In-
ternet Explorer, Mozilla, Firefox, Safari, etc..) Routers use as
their usual addresses http://192.168.1.1. or http://192.168.2.1.
Nevertheless, this address is often indicated in a label placed
under the router. If you cannot access the router please check
your routers instructions manual to access its conguration.
A user name and password is usually requested to access this
menu. Please check under your router or in your routers inst-
ruction manual to nd them.
Once you have accessed the conguration menu in your router,
look for a menu named "PORT FORWARDING" or "FORWAR-
DING" or "VIRTUAL SERVERS" or "NAT", or "APPLICATIONS
AND GAMES", or "GAMIN". This will depend on the make and
model of your router.
Once in that menu please congure the following data:
› Name: Use name you want. You can use the word "nexho" if
you want to remember this conguration.
› Ports: You may be asked for just one port or for "start" and
"nish" ports. In both cases please introduce the port "6653".
› Protocol. Usually you will be able to choose between "TCP"
and "UDP" or "Both". Please mark "UDP" or "Both".
› IP Destination: It is usually the same as the routers address
excepting the last number which must be changed to 246.
For example, if your router has as an address 192.168.1.1 in
the IP Destination you must introduce 192.168.1.246
› Mark the cell "Activate" if its visible and save the changes to
nish your router conguration.
Please keep in mind that the conguration password
by default is "nexho". You can change this password
or deactivate it. To do any of this please go to congurati-
on menu, then go into "Password" menu where you can
change/deactivate the password.
Please keep in mind that if you deactivate this pass-
word request, it will be easier to accidentally modify
the installation.
