Ethnicraft 50993 User manual

ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
OAK CORTO ROUND DINING TABLE
CODE
OAK CORTO ROUND DINING TABLE 120/120/76
DESCRIPTION
50993

50993 OAK CORTO ROUND DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
PARTS TO ASSEMBLE
CODE
TABLE TOP
DESCRIPTION
P4940
TABLE TOP 1 piece
A
CODE
LEGS
DESCRIPTION
P4941
LEGS (INTERCHANGEABLE) 3 pieces
B
USE ALLEN KEY
TO TIGHTEN
H2205
ALLEN KEY 6
(1 pc)
TOOLS
H0824
JCBC SCREW
M6x50
(6pcs)
H0383
WASHER
M8
(6pcs)
H2199
ALLEN SCREW
M8x50
(6pcs)
DIRECTION NUMBER OF
PERSONS NEEDED
USE HAND
SYMBOLSHARDWARE ENCLOSED
2 / 5
NOTE
X2
ASSEMBLY INSTRUCTION
CAREFULLY OPEN THE CARTON,
REMOVE CONTENTS AND LAY OUT ON CARPET OR THE
PACKAGING CARTON BOX OR OTHER PROTECTIVE SURFACE
TO AVOID DAMAGE.
CHECK PACKAGE CONTENTS TO ASSURE ALL THE
NECESSARY HARDWARE AND PARTS ARE RECEIVED
UNDAMAGED.
DO NOT USE DAMAGE OR DEFECTIVE PARTS/HARDWARE.
CONTACT ETHNICRAFT FOR ANY MISSING PART AND /OR
HARDWARE.
READ THE ASSEMBLY INSTRUCTION BEFORE INSTALLATION
AND CAREFULLY FOLLOW THE INSTRUCTION GIVEN.
SEEK THE ADVICE OF A PROFESSIONAL IF YOU ARE NOT
FAMILIAR WITH THESE INSTALLATIONS OR HAVE ANY
DOUBTS ABOUT THE SAFETY OF THIS INSTALLATION.
IT IS ADVISABLE TO DO THIS ASSEMBLY WITH MINIMUM
OF 2 PERSONS.
H2198
MULTI ANGLE
CONNECTOR
(2pcs)
H0745
ALLEN KEY 4
(1 pc)

3 / 5
ATTACHING LEG
A
50993 OAK CORTO ROUND DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
1 2
H2199H2199H2199
H2198H2198H2198
H0383H0383H0383
3
X
4
H0383H0383H0383
H2199H2199H2199
5
6
- DO NOT TIGHTEN FULLY- DO NOT TIGHTEN FULLY
- USE MULTI CONNECTOR (1X)
- USE ALLEN SCREW M8x50 (3X)
- USE WASHER M8 (3X)
- USE ALLEN KEY 6
- DO NOT TIGHTEN FULLY
- REPEAT THESE STEPS FOR THE OTHER LEG
MAKE SURE ALL LEGS ARE MAKE SURE ALL LEGS ARE
FACING THE SAME DIRECTIONFACING THE SAME DIRECTION
MAKE SURE ALL LEGS ARE
FACING THE SAME DIRECTION
H0383H0383H0383
H2199H2199H2199
2
3
- DO NOT TIGHTEN FULLY- DO NOT TIGHTEN FULLY
- USE MULTI CONNECTOR (1X)
- USE ALLEN SCREW M8x50 (3X)
- USE WASHER M8 (3X)
- USE ALLEN KEY 6
- DO NOT TIGHTEN FULLY
- REPEAT THESE STEPS FOR THE OTHER SIDE
TURN LEGS UPSIDE DOWN TO
ASSEMBLE THE BOTTOM SIDE
1
SLIGHTLY OPEN THE LEGS TO SLIGHTLY OPEN THE LEGS TO
INSERT THE MULTI CONNECTORINSERT THE MULTI CONNECTOR
SLIGHTLY OPEN THE LEGS TO
INSERT THE MULTI CONNECTOR

4 / 5
RE-TIGHTTEN ALL SCREWS
B
C
50993 OAK CORTO ROUND DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
FULLY TIGHTEN ALL SCREWS
ATTACHING LEGS TO TABLE TOP
1
- USE JCBC SCREW M6x50 (6X)
- USE ALLEN KEY 4
- TIGHTEN FULLY
B
A
H0824H0824H0824
H0824H0824H0824
2
3

5 / 5
50993 OAK CORTO ROUND DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
D
STABLE
NOTE :
THIS IS A COMPULSORY ACTION TO MAKE SURE
ALL OF THE ADJUSTABLE GLIDES TOUCH THE GROUND!
UNSTABLE
X
ADJUSTABLE GLIDES POSITION
ADJUST GLIDES
EFINISH
X2