Ethnicraft 51213 User manual

ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
1/6
OAK AIR BED - WITH SLATS
51213
51214
OAK AIR BED - US KING SIZE - WITH SLATS 193/203/96
OAK AIR BED - US QUEEN SIZE - WITH SLATS 153/203/96

OAK AIR BED - WITH SLATS
ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
2/6
L KEY
(Included in package)
IN YOU PACKAGE :
ASSEMBLY INSTRUCTIONS
HARDWARE (AS LISTED ABOVE)
PARTS TO BE INSTALLED
1. SIDERAILS 2pcs
2. FOOTBOARD 1pc
3. HEADBOARD RAIL 1pc
4. HEADBOARD 1pc
5. CENTER SUPPORTS 1pc
6. CENTER LEG 1pc
7. SLAT SUPPORTS 2pcs
8. SLATS 1set
L Bracket
(8pcs)
(4pcs) (4pcs)
Screw Connector
Countersunk Screw
M6x50
(1pc)
Washer
M5
(12pcs)
SYMBOLS
DIRECTION NUMBER OF
PERSONS NEEDED
USE RUBBER
HAMMER
USE HANDUSE SCREWDRIVER
TO TIGHTEN
USE L KEY
TO TIGHTEN USE WRENCH
TO TIGHTEN
WRENCH
(Not included in package)
JCBC Screw
M6x6
(8pcs)
Nut
M5
(12pcs)
HARDWARE ENCLOSED TOOLS
JF Screw
M5x40
(20pcs)
JCBC Screw
M6x20
(4pcs)
1
2
3
4
5
6
7
8
7

3/6
A. INSTALLING SIDERAIL + FOOTBOARD + HEADBOARD RAIL
1
3
1 2
1
2
1 2
OAK AIR BED - WITH SLATS
ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION

4/6
B. INSTALLING HEADBOARD
2
5
6
7
8
Note:
Before placing the headboard turn the barrel (from the leg)
with a screwdriver so the bolt-connectors (from the headboard)
fit into the barrels.
4
DO NOT FULLY TIGHTEN
1
3
- USE DOWEL (4X)
- USE BOLT CONNECTOR (4X)
- USE (4X)
- TIGHTEN FULLY
SCREW CONNECTOR
OAK AIR BED - WITH SLATS
ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION

D. INSTALLING L BRACKET TO SIDE RAIL
5/6
C. INSTALLING MIDDLE SUPPORT & CENTER LEG
1 2
3
4
- USE JCBC SCREW M6x6mm (6X)
- USE JF SCREW M5x40mm (12X)
- USE WASHER M5 (12X)
- USE NUT M5 (12X)
- TIGHTEN FULLY ALL SCREWS
7
7
OAK AIR BED - WITH SLATS
ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
- USE JCBC SCREW M6x6mm (2X)
- USE COUNTERSUNK SCREW M6x50mm (1X)
- TIGHTEN FULLY ALL SCREWS
- USE JCBC SCREW M6x20mm (4X)
55
TO ADJUST HEIGHT
3 4
5 6
5
6
1 2

E. INSTALLING SLATS
6/6
2
8
1
3
F. FINISH
OAK AIR BED - WITH SLATS
ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
SLATS TO BE ASSEMBLED ARE NUMBER 1, 6, 8 AND 13
USE JF SCREW M5x40mm (8X)
8