Eurotech EDUSKATE User manual

EDUSKATE
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
WARRANTY
CUSTOMER SERVICE 1-800-637-0005
WWW.EUROTECHSEATING.COM

ASSEMBLY INSTRUCTIONS
CHAIR NAME AND SKU OR MODEL NUMBER
Remove all items from the carton. Verify all components before assembly.
EDUSKATE
1
1
Caster
6
B
A Base and Seat Cushion
Backrest
Workpad
(with backrest folded down)
(attached to seat and folded down)
(already attached)
• Every six months, please make sure all bolts, screws and knobs are fully tightened to ensure stability. • Every six months, please make sure all bolts, screws and knobs are fully tightened to ensure stability. • Every six months, please make sure all bolts, screws and knobs are fully tightened to ensure stability.
D
E Cup Holder
(Optional)
1
(M8 X 23.5mm,Blue color)
Back Bolts
21
F
(M5 X 13mm,Blue color)
Cup Holder Bolts
21 21
G
H
I
Back Bolts Cover
2
Allen Wrench
1
Key
Spare
Description Part Qty.
Part List
C
1
1

B
A
STEP 2
Turn the workpad Now pull the Backrest (B) (C) outward.
up and back so that it is in a 90 position to the Seat º
Cushion (A).
ASSEMBLY INSTRUCTIONS
CHAIR NAME AND SKU OR MODEL NUMBER
Remove all items from the carton. Verify all components before assembly.
STEP 2
PREVENTIVE MAINTENANCE AND WARNING!
• USE THIS PRODUCT ONLY FOR SEATING ONE PERSON AT A TIME.
• DO NOT USE THIS CHAIR AS A STEP STOOL / LADDER.
• DO NOT SIT ON ANY PART OF THE CHAIR EXCEPT THE SEAT.
• DO NOT USE CHAIR ON UNEVEN FLOOR SURFACES.
• DO NOT USE CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS ARE TIGHTENED.
• EVERY SIX MONTHS, PLEASE MAKE SURE ALL BOLTS, SCREWS AND KNOBS ARE
FULLY TIGHTENED TO ENSURE STABILITY.
• IF ANY PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USE OF THE
PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY AUTHORIZED PARTS.
• DISPOSE OF PACKAGING PROPERLY. PLASTIC BAG IS NOT A TOY. DO NOT USE
PLASTIC BAG AS HEAD COVERING – IT MAY CAUSE SUFFOCATION.
• FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
• NOTE: SOME SCREWS MAY BE PREASSEMBLED. IF PREASSEMBLED, IGNORE
ASSEMBLY INSTRUCTIONS.
Please be careful to use the Blue Back Bolts (F).
Insert 1 Back Bolt (F) on each side of the Backrest (B) as
shown.
Tighten the bolts securely using the enclosed Allen Wrench (I).
Insert 1 Back Bolt Cover (H) over each Back Bolt (F).
STEP 1
STEP 4
STEP 3
STEP 2
Please be careful to use the correct Cup Holder Bolts (G).
Assemble the Cup Holder (E) to the storage shelf using the
Cup Holder Bolts (G).
Tighten the bolts securely using the enclosed Allen Wrench (I).
Press the Casters (D) into the holes at the bottom of
the Base and Seat Cushion (A).
EDUSKATE
G
D
D
FG
E
C

OPERATING INSTRUCTIONS
CHAIR NAME AND SKU OR MODEL NUMB
A WORKPAD ROTATING ADJUSTMENT
C CUP HOLDER & STORAGE SHELF
A WORKPAD ROTATING ADJUSTMENT
A1. Workpad can be rotated from left to
right freely.
A2. Workpad support structure can be
rotated horizontally and freely.
C CUP HOLDER AND STORAGE SHELF
C1. The spiral design cup holder will hold
your cup or bottle.
C2. The base is designed to serve as a storage
shelf for your belongings.
EDUSKATE
B LUMBAR SUPPORT HEIGHT ADJUSTMENT
B LUMBAR SUPPORT HEIGHT ADJUSTMENT
Move the lumbar support upward or downward
to fit your body.
The lumbar support adjustment range of
movement is approximately 2" .

• For all products except for 24/7 chairs (see below), Eurotech warrants to the original
purchaser all components for the life of the product with the exception of upholstery
and foam, which will be warranted for five years.
• For 24/7 chairs, Eurotech warrants to the original purchaser of all 24/7 chairs all components
for 10 years with the exception of upholstery and foam which will be warranted for 2 years.
• Eurotech warrants to the original purchaser that all parts will be free from material defects.
• Eurotech does not warrant any aftermarket hardware that is installed on the product.
• Eurotech does not warrant customer’s own material.
This warranty is made as of 9/15/16. Please see http://www.eurotechseating.com/warranty-
information for any updates and/or revisions to this warranty.
those specifically described.
Eurotech will repair or replace, at its option, any unaltered components.
• Eurotech’s warranty is limited to the normal use of the product in a forty hour work week
and a 250lb. weight limit unless otherwise noted.
• Eurotech shall NOT be liable for consequential or incidental damage arising from any
product defect.
• Eurotech’s warranty is limited to replacement or repair and does not cover cost of
transportation and labor. There are no other warranties expressed or implied other than
OUR PROMISE.
They say with age comes wisdom. And while we’ve learned a lot since we sold
our first office chair in 1979, even then we knew that superior craftsmanship and
design are essential ingredients in delivering real value for our customers. All
these years later, those three simple pillars still stand behind our promise of
exceptional seating with every chair we sell.
DESIGN CRAFTSMANSHIP VALUE
Eurotech. Sit Smarter.
EUROTECH WARRANTY