EVBIKE C10 User manual

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 1 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
EVBIKE - LCD C10 - User Guide
WWW.EVBIKE.CZ

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 2 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
Content:
1 / GENERAL INFORMATION
2 / SET
3 / Advanced Settings
4 / ERROR MESSAGES
Thank you for purchasing the product EVBIKE and we believe that its use will be extremely satisfied. Before installation and first use, Thank you for purchasing the product EVBIKE and we believe that its use will be extremely satisfied. Before installation and first use,
carefully read the instructions! If you found the manual a fact that would prevent you from using the product, please return it before the carefully read the instructions! If you found the manual a fact that would prevent you from using the product, please return it before the
actual installation in the undamaged original packaging back. For the current warranty conditions and the possibility of returning to contact
your dealer, who will advise you on how to proceed.

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 3 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
BASIC PARAMTERY
-Compatible with 36 V / 48 V supply
-Normal working current: 10mA
-Maximum operating current: 30 mA
-Current system switched off: <1uA
-Current supplied by the control unit: 500 mA
-Normal operating / storage temperature (ambient): -20 ° C ~ + 60 ° C
-protection IP65
-Humidity: 30% - 70%
DIMENSIONS AND PROCESSING
-The display is made back olymethylmethakrylátu . which has thermoplastic properties. Transparent display field The display is made back olymethylmethakrylátu . which has thermoplastic properties. Transparent display field The display is made back olymethylmethakrylátu . which has thermoplastic properties. Transparent display field The display is made back olymethylmethakrylátu . which has thermoplastic properties. Transparent display field
equals toughened glass.
-Preview is made in PC graphics software

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 4 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
FUNCTIONS AND CONTROLS
Function:
-Bi-directional serial communication control 5 buttons, easy to operate
-Speed: Current speed - speed, average speed - AVG maximum speed - MaxSem further displays TO GO Power Speed: Current speed - speed, average speed - AVG maximum speed - MaxSem further displays TO GO Power
W Calory C.
-Kilometers / Miles: Setting according to customer needs. Kilometers / Miles: Setting according to customer needs.
-Battery indicator: With improved algorithm is more accurate battery status display and corresponds more to real progress. Battery indicator: With improved algorithm is more accurate battery status display and corresponds more to real progress.
-Automatic Backlight: Automated switch on / off the backlight when changing ambient light intensity. 5 intensity backlight Automatic Backlight: Automated switch on / off the backlight when changing ambient light intensity. 5 intensity backlight
settings.
-5 levels of assistance: 0-5, assistance is functional at grades 1-5 5 levels of assistance: 0-5, assistance is functional at grades 1-5
-Distance traveled: The maximum distance traveled is 99,999 total distance, trip distance last appear by default. Distance traveled: The maximum distance traveled is 99,999 total distance, trip distance last appear by default.
-Display error messages
-Assisting walk: 6 km / h, not intended for cycling.Assisting walk: 6 km / h, not intended for cycling.
-Settings: parameters - mode, the wheel size, speed can be set via the display or via the programming cable.Settings: parameters - mode, the wheel size, speed can be set via the display or via the programming cable.

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 5 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
LCD DISPLAY
Description of the display:
AND -Battery status: 10-degree battery indicator. Single stage battery status can be set to a desired value. B
-USB output for charging external devices
C -Display backlighting. Displays whether the backlight on or off.
D - Displaying error condition: if an error is detected, the display shows .
E -Menu
F -Speed display on the screen: km / h or Miles
G - Maximal speedG - Maximal speed
H - Average speed
AND -Distance traveled
J -The degree of assistance: You choose between assists 1 to 5 off if none of assists, it means that
the engine is inactive. If assistance is on walking, the WALK icon -
K - Assisting walk L
-Distance traveled: displays the distance traveled by default display settings. M -
Distance traveled: mapping between the actual distance traveled, the distance (TRIP) and the total distance
traveled (TOTAL) of N -
Total distance traveled O -
Pointer speed: average speed (AVG km / h), maximum speed (MaxSem km / h) P
-Note: Notification service function - (valid for MAX DRIVE)

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 6 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
CONTROL BUTTONS
AND -Top B
-Down
C -permanent backlight
D - Turn on turn off
E -MODE
CONTROL
Turn on turn off
To turn the system on hold ( Turn on turn off) for 2 seconds. To turn off the system( Turn on turn off) for 2 seconds. To turn off the system( Turn on turn off) for 2 seconds. To turn off the system
hold for 2 seconds. The display automatically turns off when the display is 5 minutes (the time is
can be set) is inactive or the bike is down for 5 minutes.

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 7 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
assistance příšlapu
By briefly pressing or manually change the level of assistance. Assistance is the lowest first
Highest assistance is 5. After turning the system automatically selects assistance 1. If the number is not displayed assistance system is
inactive and does not support.
Choosing Assistance 1-5

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 8 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
switching views
By briefly pressing to switch between the values and speed. Last trip (TRIP km)
- total distance (TOTAL km) - maximum speed (MaxSem km / h) - average speed (AVG km / h) - range (TO GO km) -
Consumption (W) - Calories (C) are shown in successive order.
Switching between views.

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 9 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
backlight
Long hold for 2 seconds to turn on permanent display backlight. In the same manner
permanent display backlight off. When the backlight is activated, the display icon, as shown below.
Backlight on and off with the icon. It can be set in 5 stages backlight.
Assisting walk
Long hold turn on assisting walk (wheel alignment), the display will show WALK icon.
Assistance is turned off by briefly pressing the same button. Assistance to walk 6 km / h.
Switching between a standard modem and an assist walking.
Battery status indicator
In standard LCD display will show the pieces that symbolize the state of charge. When the battery is fully charged, all indicator lights with
black pieces. If the battery status display without black segments, the battery needs to be charged immediately.

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 10 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
The percentage distribution of the battery status on the LCD
USB charging
When the LCD display is off, connect the USB cable and turn on the display for charging. In the case turned on the LCD only USB cable for
charging. The maximum charging current is 500 mA.
When charging external devices via the USB port to display an icon of a USB port.

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 11 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
ADVANCED OPTIONS
Parameters:
•data deletion
•Km / Miles
•The sensitivity of the light sensor
•backlight
•automatic shutdown
•service interval
•size of the rim
•Maximum speed assistance
•Communication with battery
•error messages
ENTRANCE TO THE MENU
When the display is on, quickly double-press .The system enters MENU parameters,
Where it is possible to set parameters. To return to the standard double-press the MENU and
return to the basic display.
Menu after entering the parameter settings.
Individual parameters that can be set blink. To change them briefly press .
At the same time observe the change of parameters. To save the current settings, press briefly At the same time
You also toggle between different parameters. Double click exit submenu. If the menu remains after
inactive for 10 seconds, the display returns to the standard display.

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 12 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
Parameters:
data deletion
Double click the button enter the MENU. The display shows the text "TC". If you press enter the MENU. The display shows the text "TC". If you press enter the MENU. The display shows the text "TC". If you press .
displays, point "Y". On confirmation erases temporary data: maximum speed (MaxSem), average speed displays, point "Y". On confirmation erases temporary data: maximum speed (MaxSem), average speed displays, point "Y". On confirmation erases temporary data: maximum speed (MaxSem), average speed
(AVG) and the last distance traveled (RIP). By briefly pressing to save the setting and move to the
Settings "Km / mile." Settings "Km / mile."
If you delete temporary data will automatically be overwritten with actual data for the last 99 hours and 59 minutes.
Data will not be overwritten if the backlight set the sensitivity to "0".
Km / Miles
If the display shows "S7" press If the display shows "S7" press If the display shows "S7" press to switch between "Km / h" and "Mph".to switch between "Km / h" and "Mph".to switch between "Km / h" and "Mph".to switch between "Km / h" and "Mph".
After selecting your desired units, press to confirm and to move the light sensitivity
sensors.

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 13 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
The sensitivity of the light sensor
The display shows the symbol "BL0" press The display shows the symbol "BL0" press The display shows the symbol "BL0" press choose a number between "0" and "5". For greatest sensitivity choose a number between "0" and "5". For greatest sensitivity choose a number between "0" and "5". For greatest sensitivity choose a number between "0" and "5". For greatest sensitivity choose a number between "0" and "5". For greatest sensitivity
Vybar CILS "5". After selecting your desired units, press Vybar CILS "5". After selecting your desired units, press Vybar CILS "5". After selecting your desired units, press to confirm and move on
backlight.
backlight
Symbol for adjusting the brightness of the backlight BL1, pressing Symbol for adjusting the brightness of the backlight BL1, pressing Symbol for adjusting the brightness of the backlight BL1, pressing changing brightness settings
from "1" to "5". Value "1" the lowest intensity backlight and value "5" the highest intensity of the backlight. from "1" to "5". Value "1" the lowest intensity backlight and value "5" the highest intensity of the backlight. from "1" to "5". Value "1" the lowest intensity backlight and value "5" the highest intensity of the backlight. from "1" to "5". Value "1" the lowest intensity backlight and value "5" the highest intensity of the backlight. from "1" to "5". Value "1" the lowest intensity backlight and value "5" the highest intensity of the backlight. from "1" to "5". Value "1" the lowest intensity backlight and value "5" the highest intensity of the backlight. from "1" to "5". Value "1" the lowest intensity backlight and value "5" the highest intensity of the backlight. from "1" to "5". Value "1" the lowest intensity backlight and value "5" the highest intensity of the backlight. from "1" to "5". Value "1" the lowest intensity backlight and value "5" the highest intensity of the backlight.
After selecting your desired value, press to confirm and move to automatic shutdown.

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 14 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
automatic shutdown
The symbol for the automatic shutdown "OFF" pressing The symbol for the automatic shutdown "OFF" pressing The symbol for the automatic shutdown "OFF" pressing toggle between "1" and
"9". Each value is one minute for automatic shutdown system after selecting your desired values
press to confirm and move to set the service interval.
service interval
The symbol for service interval "NNA" pressing The symbol for service interval "NNA" pressing The symbol for service interval "NNA" pressing switch between the value "0" and "1". switch between the value "0" and "1". switch between the value "0" and "1". switch between the value "0" and "1".
Deactivation interval set by selecting values "0" ( We recommend to leave the function is disabled). After you select yourDeactivation interval set by selecting values "0" ( We recommend to leave the function is disabled). After you select yourDeactivation interval set by selecting values "0" ( We recommend to leave the function is disabled). After you select your
press the desired unit to confirm and move to adjust the size of the rim.
The display will highlight the regular service based on mileage and battery.
Every generally driven 5000 km to the system notifies regular service, displaying icons "SERVICE". Every generally driven 5000 km to the system notifies regular service, displaying icons "SERVICE".
Notifications will appear after reaching 4 seconds and every time you turn on the system until the message is deleted. When the battery
reaches 100 cycles while charging icon is displayed " SERVICE ".reaches 100 cycles while charging icon is displayed " SERVICE ".reaches 100 cycles while charging icon is displayed " SERVICE ".reaches 100 cycles while charging icon is displayed " SERVICE ".
Warning regular service can be deactivated: Settings - Maintenance warning ( MA) - Maintenance warning ( MA) - 0Warning regular service can be deactivated: Settings - Maintenance warning ( MA) - Maintenance warning ( MA) - 0Warning regular service can be deactivated: Settings - Maintenance warning ( MA) - Maintenance warning ( MA) - 0Warning regular service can be deactivated: Settings - Maintenance warning ( MA) - Maintenance warning ( MA) - 0Warning regular service can be deactivated: Settings - Maintenance warning ( MA) - Maintenance warning ( MA) - 0Warning regular service can be deactivated: Settings - Maintenance warning ( MA) - Maintenance warning ( MA) - 0Warning regular service can be deactivated: Settings - Maintenance warning ( MA) - Maintenance warning ( MA) - 0Warning regular service can be deactivated: Settings - Maintenance warning ( MA) - Maintenance warning ( MA) - 0

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 15 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
service code
The symbol for service code is PSD password 0512 ( 0 "and" 5 "and" 1 "and" 2 "i") pressing Up down The symbol for service code is PSD password 0512 ( 0 "and" 5 "and" 1 "and" 2 "i") pressing Up down The symbol for service code is PSD password 0512 ( 0 "and" 5 "and" 1 "and" 2 "i") pressing Up down The symbol for service code is PSD password 0512 ( 0 "and" 5 "and" 1 "and" 2 "i") pressing Up down The symbol for service code is PSD password 0512 ( 0 "and" 5 "and" 1 "and" 2 "i") pressing Up down The symbol for service code is PSD password 0512 ( 0 "and" 5 "and" 1 "and" 2 "i") pressing Up down The symbol for service code is PSD password 0512 ( 0 "and" 5 "and" 1 "and" 2 "i") pressing Up down
set the number (0-9) button to move in a row to enter the next number. After entering the service
You go on to the next part menu. Another option is to set the size of the rim.
size of the rim
Symbol to show the size of the rim "Lud". You can change the default settings to suit your needs. All views rim size is "Inches". Wrong Symbol to show the size of the rim "Lud". You can change the default settings to suit your needs. All views rim size is "Inches". Wrong Symbol to show the size of the rim "Lud". You can change the default settings to suit your needs. All views rim size is "Inches". Wrong Symbol to show the size of the rim "Lud". You can change the default settings to suit your needs. All views rim size is "Inches". Wrong Symbol to show the size of the rim "Lud". You can change the default settings to suit your needs. All views rim size is "Inches". Wrong
size settings causing incorrect display and retrieve values.
After selecting your desired units, press to confirm and move to the maximum setting
speed assistance.
Maximum speed assistance
Symbol for setting the maximum rate of assistance is SPL pressing Symbol for setting the maximum rate of assistance is SPL pressing Symbol for setting the maximum rate of assistance is SPL pressing choose at what
speed turns off assistance. On the road limit is 25 km / h, off road can limit
set from 12 km / h to 60 km / h. After selecting your desired units, press for
confirm and move to the main menu.

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 16 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
Communication with battery
The symbol for communication control unit with batteries b01, pressing The symbol for communication control unit with batteries b01, pressing The symbol for communication control unit with batteries b01, pressing switch information
order. After double pressing To return to the main menu.
Only if communications have been established between the battery and the controller displays the following information. Otherwise, the
display shows only "_ _ _ _". This feature applies to direct drives.
Error message
Showing buzz E00 - E09 errors are stored in memory. The maximum number of errors is 10. Buzz E00 is the latest error in počadí.

EVBIKE - control LCD C10 - User Guide EVBIKE - control LCD C10 - User Guide
- 17 -
Importer in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United KingdomImporter in the EU: GWL Power Ltd., 3rd Floor, 207 Regent Street, London W1B 3HH, United Kingdom
Understanding the error
The display 10 displays error messages. If set to an error in the system, the icon . Number
Errors appear in the speed. Meaning of error messages, refer to the table below:
error number Description of error Display an error message
03 brake signal Check the brake cable that is not jammed
04 Error accelerator lever Control of the acceleration lever that is in the initial position
05 Error accelerator lever Check the accelerator lever
06 Low battery Check the battery voltage
07 High voltage battery Check the battery voltage
08 Error main cable Check the cable and control unit
09 Error main cable Check the cable and control unit
10 High temperatures Stop the wheel and let stand until the fault disappears
11 Sensor error units Check the control unit
12 Error sensor Check the control unit
21 Error speed sensor Check the position of the magnet relative to the sensor
30 communication Error Check controller and cabling
The error message "10" appears in the long-term severe stress in the hills. Once the engine temperature reaches a certain threshold, a warning
appears to be overheating. We recommend that you let the engine cool down. If you notice, despite the bike rode, motor disconnects itself.