Eventide H9000 User manual

Instruction Manual
Revision 1.00
State Variable Filter

ii
©2022 Godlike Productions. All rights reserved. .Eventide®, Harmonizer® are trademarks of Eventide Inc.. All other trade-
marks and copyrights are property of their respective companies. Product features and specications are subject to change
without notice.
You may legally print up to two (2) copies of this document for personal use. Commercial use of any copies of this document
is prohibited. Godlike Productions retains ownership of all intellectual property represented by this document.
Godlike Productions Contact
All Customers:
Godlike Productions
PO Box 1520
Midland DC, WA, 6936, AUSTRALIA
Email: [email protected]
Caution
Ensure you have backed up all algorithms and other data of your H9000 prior to use of this product. You
use these algorithms, chains, presets, sessions and/or other content entirely at your own risk and to all
extents allowable under the law of Western Australia, Godlike Productions is not liable for loss of damage,
direct, consequential or otherwise.
https://godlike.com.au
[email protected]
https://www.facebook.com/GodlikeAustralia
www.twitter.com/GodlikeAust
https://www.youtube.com/GodlikeAu

Getting Started
1-1
Getting Started
This manual is for a custom algorithm for the Eventide H9000 available at https://godlike.
com.au/index.php?id=420. The Multimode Filter algorithm can be downloaded either as an
algorithm that you can import from a USB drive (FAT32 formatted) onto your H9000 from
the front panel, via Emote, or that can be uploaded via VSIG 3.3.3 or later.
There will also be a copy of this manual in PDF format. If you lose your copy of the les,
please contact us at https://godlike.com.au/index.php?id=contact and we will be happy to
send you another copy, or re download the algorithm from the link above. This manual will
be available within the zip le.
Installation and Activation
Method 1 - Install from USB
• Unzip the Algorithm and any presets. Copy Multimode Filternnnnnn.h9a as well as the
.9kp les to your USB drive and insert into your H9000.
• Long press the front panel Save/Import button; the Load Options screen will appear.
• Use the cursor up/down buttons or the wheel to navigate to Algorithms and press the
Enter Key.
• Use the cursor up/down keys or wheel to select the Multimode Filter algorithm and then
press the SELECT Key.
• If you do not wish to load presets, then you can use this algorithm as is. If you wish to
use the presets, you will need to repeat this proceedure until this algorithm appears as
algorithm 10134, or you can install it and use our H9000 Preset Tool to renumber your
Presets to the location where you have installed this algorithms. If you have installed to
10134, copies at lower numbers can be safely deleted using Emote (see below).
• After you have used the Preset Tool, open the .9kp les from your USB drive using the
same procedure.

Getting Started
1-2
Method 2 - Install from Emote
• Unzip the Algorithm and any Presets.
• In Emote, select Algorithm -> Import
• Navigate to the unzipped Multimode Filternnnnnn.h9a le and press open.
• If you do not wish to load presets, then you can use this algorithm as is. If you wish to
use the presets, you will need to repeat this proceedure until this algorithm appears as
algorithm 10134, or install it, and then use our H9000 Preset Tool.
• You can safely delete lower numbered algorithms used to bump this to 10134 by right
clicking on the lower numbered algorithm and selecting Delete. Continue doing this
until the only copy of Multimode Filter is the one loaded into slot 10134.
• To load the presets select Preset and then Open. Navigate to the .9kp preset les and
press Open.
Method 3 - Install using VSIG
Note that not all algorithms are available as VSIG les. If this algorithms is available as a VSIG it’s le
name will appear below.
• File: not available for this algorithm
• Unzip the .sig2 le.
• Open this le within VSIG
• Ensure that VSIG is connected to your H9000
• Select the Upload Button

Getting Started
1-3
• Select Algorithm Location and type “10134” into the text box. Press Send.
• If you prefer, you can load it to any location, and take note of the location and then use
our H9000 Preset Tools.
• Presets cannot be loaded via VSIG. Install these either from Emote or from the front
panel via USB.

Getting Started
1-4
Setting Things Up
The diagram below shows the signal ow of this algorithm.
Stereo Input Type
Morpher
Stereo
Output
Multimode
Filter
# of Filters
F1 Type
F2 Type
F3 Type
Morph
Cuto Frequency
Resonance
PParameters
Parameter Description Range
Freq This determines the cutoff frequency, or centre fre-
quency of the lter.
0 - 20,000Hz
Rez This determines the resonance, or more accurately
the Q of the frequency.. The lters bandwidth is
Frequency/Q.. Higher levels are steeper, more resonant
lters.
0 - 20
F1 Type, F2
Type, F3 Type
This selects between Lowpass, Bandpass, Highpass and
Notch lter. The Freq and Rez will remain set when
lters are changed.
Lowpass,
Bandpass,
Highpass,
Notch
# of Filters The number of lters to morph between 1, 2, 3
Morph The proportion of each lter inuencing the output
lter.
0 - 100%

Getting Started
1-5
This algorithm is a state variable lter with adjustable frequency and Q. Up to 3 different
lter types can be selected and the morph knobs allows smooth morphing between the
3 shapes to create unique lters. It is stereo in and out and both channels are processed
independently, for true stereo.
For a demo of this algorithm visit https://youtu.be/P-xYB07RAX4