Everdure HSE151W User guide

HEAT LIVE RELAX
OPERATION, MAINTENANCE
AND SAFETY INSTRUCTIONS
FOR EVERDURE HEATER HSE151W, HSE201W, HSE152W & HSE202W

HEAT LIVE RELAX
INTRODUCTION
Congratulations on purchasing your new Everdure Thermoconducting electric heater. A revolutionary new design,
this heater uses up to 90% less oil than a standard oil column heater with a unique formula that allows the liquids
to convert to a vapour, increasing the amount of heat generated by convection. This, coupled with the patented
French design, makes it a suitable appliance for any modern home. Add on the fast heat-up time (under 2 minutes)
and an economy function to help keep the family budget intact, makes it a must for anyone looking for a safe
heater that can be used almost anywhere within the home. We hope you will enjoy this appliance for years to come.
OTHER PRODUCTS AVAILABLE FROM EVERDURE
Now you know who we are, why not look at some of the other products we have to offer?
Barbecues Cooking Products
Gas Heaters

HEAT LIVE RELAX
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT: Read the safety precautions of this booklet carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage. If you are unsure about anything regarding your heater or these instructions, please
contact Everdure on 1300 766 066 in Australia or [phone] in New Zealand before
operating your appliance
.
1. Read all instructions carefully before using the heater.
2. Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electrical shock, or injury to persons. Do not modify this appliance.
3. Remove the package and ensure that the appliance is undamaged (keep packing box for later
storage). In case of doubt do not use the appliance and contact Everdure Service. Do not let children
play with any parts of the packaging.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience or knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance. Extreme caution is necessary when the
heater is used by or near children or individuals with decreased mental and physical capacity and
whenever the heater is left operating unattended.
5. Before you use the appliance, check if the voltage marked on the rating label corresponds to the mains
in your home. The appliance must be connected to a grounded power supply.
6. This heater is filled with a precise quantity of oil. Do not try to refill or adjust the level of oil.
7. Avoid using extension cords as the extension cord may overheat and cause a risk of fire. If the use of
an extension cord cannot be avoided, always use one with a minimum rating of 13Amps. Do not use
this appliance with a programmer, timer or any other device that switches the appliance on
automatically, since a fire risk exists if the appliance is covered or positioned incorrectly.
8. Do not pull the power cord to disconnect with the power source. Always grasp the plug to pull it out.
9. Do not run power cords under rugs or other combustible materials. Do not place power cords in areas
where they can be a tripping hazard.
10. Do not insert any objects into the heater as it may cause an electric shock or fire or damage to the
heater. Do not block or tamper with the heater in any manner while it is in operation. To prevent a
possible fire, do not cover the appliance in any manner.
11. Do not leave the heater unattended. Always unplug the heater when not in use.
WARNING: The Main Power Switch should not be used as the sole means of disconnecting power.
Always unplug the power cord before servicing or moving the unit.
12. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use the
handle when moving the heater (where available) or hold on the sides if not available (make sure the
unit is turned off). Keep combustible materials such as furniture, pillows, bedding, papers, clothes
and curtains at least 1m from the heater to the sides, front, rear & top.
13. The heater has hot and arcing or sparking parts inside. It must NOT be used in potentially dangerous
locations such as flammable, explosive, chemical-laden or wet atmospheres. This heater is intended
for general indoor domestic use ONLY.
14. This heater is not intended for use in wet or damp locations. Never locate a heater where it may fall
into a bathtub or other water container.
15. Do not use the heater outdoors.
WARNING:
To avoid danger of electric shock, unplug from outlet when not in use and before cleaning. If the
supply cord is damaged, it must be replaced by a special cord or assembly available from an
authorised person. In order to avoid overheating, do not cover the heater. The heater must NOT
be located immediately below a socket outlet. Do not use the heater in the immediate
surroundings of a bath, shower or swimming pool.
2

HEAT LIVE RELAX
GENERAL SPECIFICATIONS
MODEL HSE151W HSE201W
HSE152W
HSE202W
V
OLTAGE RATING 230V, 50Hz 230V, 50Hz
230V, 50Hz
230V, 50Hz
POWER CONSUMPTION 1500W 2000W
1500W
2000W
HEATER SIZE (cm) H
x
W
xL 59
x
19x60 59
x
19
x
74
64x23.5x56.5
64x23.5
x
71
W
EIGHT (kg) 12.5 16.5
15.5
19.5
1. Control Panel 2. Handle
3.
W
heels
3
2
1
3
3
1
Front
Front
2
Air Outlet
A
ir Outlet
Model: HSE151W, HSE201W
Model: HSE152W, HSE202W

HEAT LIVE RELAX
INSTALLATION
This appliance comes with a number of parts which must be assembled to the main body before use. Check each
part is present & in good condition before proceeding.
1.
A
xle 1pc 2. Spacer
2pcs
3.
Pin
Stopper 2pcs
4. Scre
w
2pcs
5. Scre
w
Cover
2pcs
6.
W
heel
2pcs
1. Fit one pin stopper into the axle. Place one wheel onto the axle and align the groves in the back of the
wheel over the pin. Fix wheel into place with one screw & push the screw cover into the centre of the
wheel. Push a spacer over the other end of the axle up to the pin & wheel.
2. Push the axle assembly through the supplied hole
in the appliance (at the front of the HSE151W &
HSE201W as shown, or rear of the HSE152W &
HSE202W). Push the second spacer over the axle
and fit the second pin stopper. Place the second
wheel onto the axle and align the groves in the
back of the wheel over the pin. Fix wheel into
place with one screw & push the screw cover into
the centre of the wheel.
1
2 3
6
4 5
1
2
3

HEAT LIVE RELAX
OPERATING INSTRUCTIONS
CONTROL PANEL
POWER ON/OFF BUTTON
Make sure the power supply and power switch are on. Press the Power On/Off Button once and the unit will now be active and
the Power Indicator will light up. The display will start flashing the current thermostat temperature setting (default is 25°C) and
then switch to the current ambient temperature. Press a second time and the appliance will revert back to the standby mode.
Note: If the thermostat temperature is set to a level below the ambient temperature, the unit will not run. Once the ambient
temperature falls below the set thermostat temperature, the unit will turn on and start to produce heat.
TEMPERATURE CONTROL BUTTONS
The appliance starts with the thermostat temperature set to (25°C). Pressing the “+” or “-“ will adjust the running temperature
to between 16°C & 32°C. The new thermostat temperature will be displayed (flashing) for a few seconds after the operation is
completed & then the display will revert to the ambient temperature.
POWER CONTROL KNOB
The amount of power used by the heater can be also be adjusted with the Power Control Knob. Increasing the power setting
will allow the heater to heat up faster (but use more power), where decreasing the setting will allow the heater to reach it’s set
temperature over a longer time. A higher setting is best for heating up a cold room fast, where a lower setting is better for
keeping a warm room at the set temperature. The power setting is shown on the power display.
ECO ON/OFF BUTTON
Pressing this button adjusts the thermostat temperature setting to 3°C below what is set (ie if the thermostat temperature has
been left at the default 25°C, the heater will run to 22°C). The ECO display will light up to show it is operational. Turn this
function off by pressing it a second time.
Power Display
Temperature Display
Power Indicator Light
Power Control Knob
Power On/Off Button
ECO Display
Temperature
Control Buttons
ECO On/Off
Button

HEAT LIVE RELAX
CLEANING & MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT
IMMERSE HEATER IN WATER OR POUR WATER ON HEATER!
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage the heater. NEVER
use ALCOHOL OR SOLVENTS. Do not use detergents, polish or other abrasive cleaning powders as they can
damage the surface of the heater.
To clean, wipe with a dry cloth to remove dust and then a damp cloth to remove any stains.
Use a vacuum cleaner to remove dust & lint from within the outer metal grids of the appliance.
STORAGE: Store the heater with these instructions in the original packaging, in a cool, dry place.
WEEE WARNING
This product should not be disposed of with household waste. Please recycle where facilities exist and
check with your local authority for recycling advice.
HINTS & TIPS
Where possible your electric heater should be connected to a power outlet that uses a separate 10 amp power
circuit. This will avoid overloading your household fuse.
In the event that your household fuse is overloaded and trips, please note this is normally caused by the use of
excessive power outlets at the same time your heater is operating (for example, a steam iron, kettle, toaster etc.).
Please ensure to check the use of the power circuit and adjust when heater is in use (i.e. turn off the heater when
boiling a kettle).
Should you still experience difficulty contact Everdure Service for assistance.
It is important that you retain these instructions, proof of purchase as well as
other important documents about this product for future reference.
Due to continual product development, Everdure reserves the right to alter
specifications or appearances without notice.
Dispose of packaging responsibly – recycle where facilities are available.

HEAT LIVE RELAX
A division of Shriro Australia Pty Ltd
104 Vanessa St Kingsgrove NSW 2208
In Australia: 1300 766 066
In New Zealand: [phone]
www.everdure.com
IM Ref: HSEXXXW 30/2013/10
HEAT LIVE RELAX