EverFocus ECOR264-D2 DVR Series User manual

2
3
4
1
15
ECOR264-D2 Quick Reference Guide
Operating elements
◄◄/◄I : Fast reverse playback or step reverse playback depending on
playback mode.
◄/ II: Reverse playback or pause
►/ II: Forward playback or pause
Power LED: This LED ON indicates Power on.
123456 7 8 9 10
Description of on-screen main menu (control bar)
DVD+RW: DVD+RW burner for DVD model. (D models only)
16 Alarm LED: This LED ON indicates Alarm active.
17 HDD LED: This LED ON indicates HDD active.
18 Network LED: This LED ON indicates Network active.
4
7
6
5
8
9
13
10
11 View: Press this key to switch between 4x, PiP (Picture In Picture), full screen and 9x.
Note: 1. PIP display is not available in playback mode.
2. This key is also used for BNC and VGA selection at the initial setup.
Copy: Press this key to enter Copy Menu.
SEQ: Press this key to enter the auto sequential switching mode. The sequence
dwell time can be set in “Display Setting” tab of the Menu.
12
14
Live: Press this key to show live view. Press to exit from playback mode.
►►/I►: Fast Forward playback or step forward playback depending on playback mode.
Channel keys 1~8 (1~4):
- Press channel key (CH1~CH8) / (CH1~CH4) to display that channel in full screen view.
- Press channel key again for 2x electronic zoom.
Menu/ESC: Press this key to enter/exit MAIN SETUP MENU.
Enter/ Arrow keys: Instead of or in combination with a mouse, you can use these
keys to change the Menu settings.
Search: Press this key to enter Search Menu.
2
3
4
7
6
5
8
9
1
10
Express menu (manual chapter 4.2)
Camera menu (manual chapter 4.3)
Record & Play menu (manual chapter 4.4)
Alarm & event menu (manual chapter 4.5)
Schedule menu (manual chapter 4.6)
Network menu (manual chapter 4.7)
Disk menu (manual chapter 4.8)
Display menu (manual chapter 4.9)
System menu (manual chapter 4.10)
Information menu (manual chapter 4.11)
USB 2.0 (front): For connecting USB-Flash-Drive to copy/archive video or for
firmware upgrades.
P/N: 4605XECR04002AR_Ver.A

ECOR264-D2 Quick Reference GuideOperation
1. Monitor display formats
The monitor allows full screen, picture-in-picture, 4x, 6x, 8x and 9x multiscreen display
(PiP in live mode only) as well as sequence view.
Display format switching
Repeated VIEW key actuation switches between the display formats mentioned above.
Full screen:
Select one of the channel keys 1 ~ 8 (8 CH model), 1~4 (4 CH model)
Sequence (automatic switch, available in live mode only)
Press the SEQ key to start / stop the automatic switching mode.
2. Menu start
Press the MENU key to access the main menu bar (front key no. 16). Control the menu
either through mouse or through the arrow keys (front keys no. 18).
3. Brightness – contrast – color
From the menu on the left, choose the search method:
- Time search
Enter time and date of the requested recording position and click PLAY.
Upon successful search, the monitor automatically switches to playback mode and
playback starts at the requested position.
-Event search
Select time and date as well as the relevant camera(s). In the “Event“ row, select
the requested event type (alarm, motion, video loss, others) and confirm
your selection by clicking SEARCH. After the search, a list of available events is
displayed. Select the relevant event from the list and click PLAY.
The monitor automatically switches to playback mode and playback starts at the
selected position.
-Smart search
Select time and date as well as the relevant camera(s). Click “Grid Setting“ key to
edit motion grid setup. Confirm your selection by clicking SEARCH. After the search,
a list of available motion is displayed. Select the relevent motions from the list and
click PLAY. The monitor automatically switches to playback mode and playback starts
at the selected position.
Brightness, contrast and color can individually be set for each video channel. Select the
camera menu (2nd icon) and enter the option “Video adjust“. Define the values by using
either the mouse or the arrow keys located around the ENTER key. After adjusting the
values, exit the menu by either pressing the MENU key 3 times or mouseclick on the
cross in the menu bar (top right corner).
4. Recording
Recording starts directly after the recorder has booted; there is no separate LED or
display.
5. Playback
Start the playback at the latest HDD playback position by pressing the PLAY key (Quick
Play function deactivated!).
Fast forward / reverse:
Use the „Fast Forward“ key to play video images forward / reverse with up to 32x speed
(1x,2x,4x,8x,16x,32x and >>> “minute steps“)
Pause:
Actuate ◄/ II or ►/ II to freeze the current playback position.
6. Playback search
Press the SEARCH key to enter the playback search menu.
at the selected position.
-Snapshot search
Select among thumbnail images extracted from the recorded video at a user defined
interval, at a specific date and time, in response to various types of events. Confirm
your selection by clicking SEARCH. After the search, all the snapshots will be
displayed. The result gives user an efficient review of significant activities.
7. Archiving video data
To archive to USB, insert a USB stick into the USB socket at the front. To archive to
CD/DVD, insert the CD/DVD into the DVD+RW burner at the front . Press the COPY key
in live mode to display the context menu.
Enter start and end time of the video export as well as the camera number and press
COPY to start the video data export.
If requested, the player software can also be exported to the USB stick or CD/DVD by
activating the checkbox “Player“.
Exit the menu by either pressing the MENU key several times or mouseclick on the cross
in the menu bar (top right corner).
8. Everfocus Central Management Software
ECOR264-D2 DVR is supported by Everfocus Central Management Software. Please visit
Everfocus website at: http://www.everfocus.com to download the software.