evertz 3025SW User manual

3025SW
Master Control Switching
& Channel Branding
System Manual
© Copyright 2012
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive,
Burlington, Ontario,
Canada,
L7L 5Z9
Phone: [phone] Internet: Sales: [e-mail]
Sales Fax: [phone] Tech Support: [e-mail]
Tech Support Phone: [phone] Web Page: http://www.evertz.com
Tech Support Fax: [phone]
Version 1.0, June 2012
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for
the use of purchasers of the 3025SW Mini-Master Control Switcher. Evertz Microsystems expressly prohibits the use of this
manual for any purpose other than the operation of the master control switcher.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems
Ltd. Copies of this guide can be ordered from your Evertz products dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-insulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE TH
IS APPARATUS TO
RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
This equipment with the CE marking complies with both the EMC Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European standards:
•EN60950 Product Safety
•EN55103-1 Electromagnetic Interference Class A (Emission)
•EN55103-2 Electromagnetic Susceptibility (Immunity)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to the
European Union EMC directive. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at their own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s authority to
operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface
cables with the shield connected to the chassis ground of the device must be used.
EN60950
Safety
EN504192 2005
Waste electrical products should not
be disposed of with household
waste. Contact your Local Authority
for recycling advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity
Evertz Microsystems Ltd
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may cause harmful interference, and
This device must accept any interference received, including
interference that may cause undesired operation.
Tested to comply with
FCC Standards
For Home or Office Use

3025SW Master Control Switching & Channel Branding
Revision 1.0
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0 First Release June 2012
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof or for
the rights of third parties, which may be effected in any way by the use thereof. Any representations in this document concerning performance of
Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered
by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is
granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation.
Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you encounter an error,
please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in equipment design or
specifications.

3025SW Master Control Switching & Channel Branding
Revision 1.0
This page left intentionally blank

3025SW Master Control Switching & Channel Branding
Revision 1.0 Page i
TABLE OF CONTENTS
1. OVERVIEW ..............................................................................................................................1
1.1. FEATURES & BENEFITS........................................................................................................1
1.2. 3025SW SYSTEM OVERVIEW................................................................................................3
1.3. THE 3025SW PLATFORM.......................................................................................................3
2. INSTALLATION .......................................................................................................................5
2.1. UNPACKING............................................................................................................................5
2.2. INSTALLING AND REMOVING THE MODULES ...................................................................5
2.2.1. Installing the Module Rear Plate...................................................................................5
2.2.2. Opening and Closing the Front Panel...........................................................................6
2.2.3. Installing a Module........................................................................................................6
2.2.4. Removing a Module......................................................................................................6
2.3. MOUNTING..............................................................................................................................6
2.4. COOLING.................................................................................................................................7
2.4.1. Fan Exhaust .................................................................................................................7
2.5. SERVICING INSTRUCTIONS..................................................................................................7
2.5.1. Changing the Fuses......................................................................................................7
2.5.2. Replacing the Power Supply.........................................................................................8
2.6. POWER..................................................................................................................................10
2.6.1. Connecting the Power ................................................................................................10
2.6.2. Turning the Power On and Off....................................................................................11
2.6.3. Power Supply Status Indicators..................................................................................11
2.7. FRAME STATUS FAULT CONDITIONS...............................................................................12
2.8. 3025SW MODULE REAR PANEL OVERVIEW ....................................................................12
2.8.1. 3025EMC-IO-BNC......................................................................................................14
2.9. INTERFACE DEFINITIONS...................................................................................................14
2.9.2. AES / MADI INPUTS and OUTPUTS.........................................................................17
2.9.3. AUDIO ........................................................................................................................17
2.9.4. AUX IO-1 and AUX IO-2.............................................................................................17
2.10. CONNECTING THE LINEAR TIME CODE............................................................................21
2.11. ETHERNET CONNECTIONS.................................................................................................21
2.12. CONTROL PANEL INSTALLATION: QMC-CP-1000E, QMC-CP-E & QMC-CP2048E.......22
2.13. ELECTRO STATIC DISCHARGE (ESD) PRECAUTIONS....................................................23
2.14. MOUNTING............................................................................................................................24
2.15. COOLING...............................................................................................................................24
2.16. USE OF SHIELDED CABLES...............................................................................................24
2.17. REAR PANEL CONNECTIONS.............................................................................................24
2.17.1. Power .........................................................................................................................25
2.17.2. Connecting the Control Panels using Ethernet...........................................................25
2.18. CONTROL PANELS INSTALLATION: QMC-DCP AND EMC-DCP.....................................26
3. 3025SW CONFIGURATION ..................................................................................................27
4. EMC CONFIGURATION SOFTWARE ..................................................................................30
4.1. SETTING UP IP AND QLINK.................................................................................................31
4.1.1. Setting Up QLINK.......................................................................................................35
4.2. CONFIGURING A 3025SW CHANNEL.................................................................................36

3025SW Master Control Switching & Channel Branding
Page ii Revision 1.0
4.3. GENERAL CHANNEL INFORMATION.................................................................................37
4.3.1. Mini Master Mode .......................................................................................................37
4.3.2. Channel Name and Description..................................................................................38
4.3.3. QMC-Link Address .....................................................................................................39
4.3.4. Transition Timings.......................................................................................................39
4.3.5. Default Transition........................................................................................................41
4.3.6. Customizations ...........................................................................................................41
4.3.7. MC Board Type...........................................................................................................41
4.3.8. Options........................................................................................................................41
4.3.9. Frame Delay ...............................................................................................................42
4.3.10. Video Transition Offset ...............................................................................................42
4.4. VIDEO CONFIGURATION.....................................................................................................44
4.4.1. Video Standard...........................................................................................................44
4.4.2. Output.........................................................................................................................45
4.4.3. Genlock Source..........................................................................................................45
4.4.4. DVE ............................................................................................................................46
4.4.5. Auxiliary Output...........................................................................................................46
4.4.6. Using Aux for Audio Monitoring ..................................................................................47
4.4.7. Input Timing Window Adjustment ...............................................................................50
4.4.8. Logos..........................................................................................................................50
4.5. AUDIO CONFIGURATION.....................................................................................................51
4.5.1. Input Parameters ........................................................................................................51
4.5.2. Metadata Router/Metadata Presets............................................................................53
4.5.3. Operational Options....................................................................................................53
4.6. AUDIO INPUT DEFAULTS/STORES ....................................................................................55
4.6.1. Bus Defaults................................................................................................................56
4.6.2. Audio Summing ..........................................................................................................56
4.6.3. Input Gain ...................................................................................................................56
4.6.4. Input Type...................................................................................................................56
4.6.5. Ratio............................................................................................................................56
4.6.6. Transition Time...........................................................................................................57
4.6.7. Foreground Ratio........................................................................................................58
4.6.8. Stores..........................................................................................................................58
4.7. AUDIO SHUFFLER................................................................................................................58
4.7.1. Shuffle Stores .............................................................................................................61
4.8. KEYER ...................................................................................................................................63
4.8.1. Internal Keyer Routing / Priority..................................................................................63
4.8.2. Options........................................................................................................................64
4.8.3. Key Signal Settings.....................................................................................................65
4.8.4. Global Option..............................................................................................................67
4.9. PORTS ...................................................................................................................................67
4.9.1. Protocol Settings.........................................................................................................68
4.9.2. Protocol.......................................................................................................................68
4.9.3. Communications.........................................................................................................68
4.9.4. Qlink Over Ethernet ....................................................................................................69
4.9.5. Protocol Data Bytes....................................................................................................69
4.9.6. Configuration Parameters...........................................................................................69
4.9.7. SNMP Trap Destinations IP Addresses......................................................................69
4.10. MINIMASTER.........................................................................................................................70
4.11. AS-RUN/DIAGNOSTICS........................................................................................................73
4.12.1 Logging General .........................................................................................................74
4.12.2 Port Logging Levels....................................................................................................74

3025SW Master Control Switching & Channel Branding
Revision 1.0 Page iii
4.12.3 Video Diagnostic.........................................................................................................75
4.12.4 Audio Diagnostic.........................................................................................................75
4.12.5 System Log.................................................................................................................75
4.12. SELECTIVE BYPASS............................................................................................................78
4.13. WIPES....................................................................................................................................79
4.13.1. Wipe Timing................................................................................................................79
4.13.2. View Table..................................................................................................................80
4.13.3. Multiple Transition Adjustments..................................................................................80
4.13.4. Wipe Characteristics...................................................................................................81
4.13.5. Panel Button Text.......................................................................................................81
4.14. TIME/DATE ............................................................................................................................82
4.15. GPI/O’S..................................................................................................................................83
4.15.1. GPI Control.................................................................................................................84
4.15.2. GPI Scripts..................................................................................................................88
4.15.3. GPO Control...............................................................................................................89
4.15.4. GPO SCRIPTS...........................................................................................................93
4.16. EAS ........................................................................................................................................95
4.16.1. EAS Vertical Position..................................................................................................97
4.16.2. EAS Font ....................................................................................................................97
4.16.3. EAS Height.................................................................................................................97
4.16.4. EAS Rate....................................................................................................................98
4.16.5. EAS Colour Settings...................................................................................................98
4.17. TEMPERATURE....................................................................................................................99
4.17.1. Temperature Format...................................................................................................99
4.17.2. Setting the Temperature Source...............................................................................100
4.17.3. Setting the Temperature...........................................................................................100
4.17.4. Setting the METAR Server Setup.............................................................................100
4.18. PROXY.................................................................................................................................102
4.18.1. Proxy Server Setup...................................................................................................102
4.18.2. Domain Name Server...............................................................................................103
4.19. USER TRANSITIONS ..........................................................................................................103
4.19.1. Video & Keyer Timings.............................................................................................105
4.19.2. View Table................................................................................................................105
4.19.3. Multiple Transition Adjustments................................................................................106
4.19.4. Audio & Voice-Over Timings.....................................................................................106
4.19.5. View Table................................................................................................................106
5. CONFIGURING SOURCE NAMES AND ROUTER SIZE ...................................................107
5.1. CONFIGURING CURRENT SOURCE.................................................................................108
5.1.1. Audio Parameters.....................................................................................................108
5.1.2. Keyer Parameters.....................................................................................................109
5.1.3. Pre-roll Parameters...................................................................................................109
5.1.4. Logo Parameters......................................................................................................109
6. CONTROL PANELS ............................................................................................................110
6.1. SINGLE CHANNEL PANELS..............................................................................................110
6.1.1. QMC-CP-E ...............................................................................................................110
6.1.2. QMC-CP-1000E .......................................................................................................110
6.1.3. QMC-CP-2048E .......................................................................................................111
6.1.4. QMC-DCP & EMC-DCP...........................................................................................111
6.2. MULTI CHANNEL PANELS ................................................................................................112
6.3. CONFIGURING THE CONTROL PANELS .........................................................................112

3025SW Master Control Switching & Channel Branding
Page iv Revision 1.0
6.3.1. QMC CP1000E – Key Definition...............................................................................113
6.3.2. QMC-CP1000E LCD Properties ..............................................................................116
6.3.3. QMC-CP-E Key Definition........................................................................................117
6.3.4. QMC-CP-E LCD Properties.....................................................................................119
6.3.5. QMC-DCP – Dialog ..................................................................................................120
6.3.6. QMC-DCP – Panel Properties..................................................................................124
6.3.7. QMC-DCP LCD Properties......................................................................................124
6.3.8. QMC-DCP – Side Car...............................................................................................125
7. 3025SW OPTIONS...............................................................................................................126
7.1. INTERNAL MEDIA STORE..................................................................................................126
7.1.1. Storage Capacity of Playout Cache..........................................................................126
7.1.2. Primer on Creating Logos.........................................................................................128
7.2. DVE FOR SQUEEZEBACKS...............................................................................................133
7.2.1. DVE Move Manager .................................................................................................133
7.2.2. Creating a DVE Move...............................................................................................135
7.3. MACROS..............................................................................................................................141
7.3.1. Macro Manager.........................................................................................................141
7.3.2. Creating or Editing a Macro......................................................................................143
7.4. MARKETS............................................................................................................................147
7.4.1. System Markets........................................................................................................147
7.4.2. Creating / Editing Markets.........................................................................................148
7.5. NETWORK PANEL SETTINGS...........................................................................................150
7.6. AUTOMATION CONTROL...................................................................................................151
8. CONFIGURATION ...............................................................................................................152
8.1. SETTING UP THE TEMPERATURE PROBE (+TP OPTION)............................................152
8.2. CONFIGURING THE EAS (+E OPTIONED UNITS ONLY).................................................153
8.2.1. Serial.........................................................................................................................153
8.3. EAS DECODER INTERFACE (EAS OPTIONED UNITS ONLY) ........................................154
8.3.1. Connecting the EMC to the EAS Decoder................................................................154
8.3.2. Connecting the Serial Port........................................................................................155
8.3.3. Sage Decoder Configuration.....................................................................................155
8.3.4. TFT Decoder Configuration ......................................................................................157
8.3.5. DASDEC Decoder Configuration (SERIAL)..............................................................157
8.3.6. Connecting the Audio................................................................................................158
8.3.7. Connecting the GPI Tally Control .............................................................................158
8.4. TESTING THE SYSTEM......................................................................................................158
8.4.1. Testing the Sage Decoder........................................................................................158
8.4.2. Testing the TFT Decoder..........................................................................................158
8.4.3. Testing the Dasdec Decoder (Serial)........................................................................159
8.4.4. Testing the Dasdec Decoder (IP)..............................................................................159
9. APPLICATION NOTES........................................................................................................163
9.1. CONTOROL PANEL KEY TYPES.......................................................................................163
9.2. EMC-DCP (QMC-DCP) GPIO BUTTON TYPES .................................................................181
9.2.1. GPI/O TOGGLE........................................................................................................181
9.2.2. GPI/O ASSERT ........................................................................................................181
9.2.3. GPO ACTIVATE.......................................................................................................181
9.2.4. GPI TALLY................................................................................................................182
9.3. UPGRADING THE 3025SW FIRMWARE............................................................................182
9.3.1. Overture Media Manager..........................................................................................182