Expedition One HI-LIFT GEN 3 User manual

INSTALLATION GUIDE
GEN 3 TIRE CARRIER HI-LIFT MOUNT

2
CONTENTS
HARDWARE
ITEM QTY
Hi-Li 1
Hi-Li Plate 1
Hi-Li Knob 1
Hi-Li Knob No read 1
5/16” - 18 X 1” Carriage Bolt 1
3/8”- 16 Clip Nut 1
Linch Pin 1
Top Plate 1
Bottom Plate 1
FJ/JK/JL NATO Mounting Hardware 1
3/8”-16 X 1” Button Head BoltS 8
3/8”-16 X 1” Nyloc Nuts 8
SKILL LEVEL - 2 STARS
1 STAR EASY - No tools required
2 STARS BASIC - Requires standard tools, basic mechanical knowledge and understanding
3 STARS MODERATE - Requires standard tools. Some drillling and/or cutting.
4 STARS ADVANCED - Requires speciality tools. Drilling, cutting, and/or welding
5 STARS EXPERT - Professional installation recommended.
DISCLAIMER
Expedition One is not responsible for any damages to vehicle or injury.
We always recommend professional assistance when installing our vehicle products.
Always follow safety procautions including the use safety gear and devices.
3
3
HI-LIFT ASSEMBLY
Assemble the Hi-Li as shown
1
GEN 3 TIRE CARRIER HI-LIFT MOUNT
MOUNTING PLATES
Attach the top and bottom plates as shown.
JK/JL SWING ARM SHOWN  FJ IS MIRRORED
2
FOR USE ON GEN 3 TIRE CARRIER SWING ARMS - FJ CRUISER AND JK/JL WRANGLER
TOP PLATE
BOTTOM PLATE

4
3
HI-LIFT MOUNTING
Attach the Hi-Li as shown using the provided hardware.
JK/JL SWING ARM SHOWN  FJ IS MIRRORED
3