Expedition One NATO CAN GEN 2 User manual

INSTALLATION GUIDE
GEN 2 TIRE CARRIER NATO CAN MOUNT

2
CONTENTS
HARDWARE
ITEM QTY
Nato Can 1
Nato Can Strap 4
Nato Can Knob 1
3/8”-16 Clip Nut 1
Linch Pin 1
Top Plate 1
FJ/JK Bottom Plate 1
FJ/JK NATO Mounting Hardware 1
3/8”-16 X 1 1/4” Button Head Bolts 1
3/8”-16 X 2 1/2” Button Head Bolts 2
3/8” Washer 3
3/8”-16 X 1” Nyloc Nuts 3
SKILL LEVEL - 2 STARS
1 STAR EASY - No tools required
2 STARS BASIC - Requires standard tools, basic mechanical knowledge and understanding
3 STARS MODERATE - Requires standard tools. Some drillling and/or cutting.
4 STARS ADVANCED - Requires speciality tools. Drilling, cutting, and/or welding
5 STARS EXPERT - Professional installation recommended.
DISCLAIMER
Expedition One is not responsible for any damages to vehicle or injury.
We always recommend professional assistance when installing our vehicle products.
Always follow safety procautions including the use safety gear and devices.
3
3
NATO CAN
Assemble the Nato Can as shown.
1
GEN 2 TIRE CARRIER NATO MOUNT
MOUNTING PLATES
Place the top and bottom plates as shown.
JK SWING ARM SHOWN  FJ IS MIRRORED
2
FOR USE ON GEN 2 TIRE CARRIER SWING ARMS - FJ CRUISER AND JK WRANGLER
TOP PLATE
FJ JK

4
3
NATO CAN MOUNTING
Attach the Nato Can as shown using the provided hardware.
JK SWING ARM SHOWN  FJ IS MIRRORED
3
3/8”-16 X 1 1/4” Button Head Bolt
3/8”-16 X 2 1/2” Button Head Bolts