
STARTING-UP AND APPLIANCE MANAGEMENT
Before the first use
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Starting-up
•Start up / switch off the hob:
Action Control panel Display
To start press key [ ] 2 x [ 0 ]
To stop press key [ ] nothing or [ H ]
•Start up / switch off a heating zone:
Action Control panel Display
Zone selection press selection key display is on
Increase power press key [ + ] [ 1 ] to [ 9 ]
Decrease power press key [ - ] [ 9 ] to [ 1 ]
Stop press simultaneous [ + ] and [ - ] [ 0 ] or [ H ]
or press key [ - ] [ 0 ] or [ H ]
Residual heat indication
After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light is on,don’t touch the heating zone and don’t put any heat
sensitive object on them. There are risks of burn and fire.
Automatic cooking
All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power during a certain time, and then reduces automatically its power on the pre-selected
level.
•Start-up :
Action Control panel Display
Zone selection press selection key [ 0 ]
Full power setting press key [ + ] [ 1 ] to [ 9 ]
Automatic cooking repress key [ + ] [ 9 ] is blinking with [A]
Power level selection press key [ - ] [ 9 ] wents to [ 8 ] [ 7 ]
(for example « 7 ») [ 7 ] is blinking with [A]
•Switching off the automatic cooking :
Action Control panel Display
Zone selection press selection key [ 7 ] is blinking with [A]
(for example « 7 »)
Power level selection press key [ - ] or [ + ] Level selected