Extraflame Viviana User manual

1
Stove and pellet inSertS uSer manual
ViViana - ViViana Plus - dorina
engliSh/ingleSe

2

index
3
We thank you for having chosen our company; our product is a great heating solution developed from the
most advanced technology with top quality machining and modern design, aimed at making you enjoy
the fantastic sensation that the heat of a ame gives, in complete safety.
Extraame S. p. A.
enGLiSH....................................................................................................................................................................................................................................4
WarninGS..................................................................................................................................................................................4
Safety........................................................................................................................................................................................ 4
routine Maintenance.......................................................................................................................................................... 4
Safety deviceS........................................................................................................................................................................ 5
inStaLLation............................................................................................................................................................................ 5
InstallatIons allowed ...................................................................................................................................................................................................... 6
InstallatIons not allowed............................................................................................................................................................................................ 6
ConneCtIon to the smoke evaCuatIon system................................................................................................................................................... 6
smoke Channel or fIttIngs............................................................................................................................................................................................. 6
ChImney or IndIvIdual flue............................................................................................................................................................................................. 7
ChImney Cap ............................................................................................................................................................................................................................... 8
ConneCtIon to external aIr Inlets ........................................................................................................................................................................... 9
InsulatIon, fInIshIngs, CoverIng and safety reCommendatIons ........................................................................................................ 9
PeLLetS and feedinG ............................................................................................................................................................. 9
Hot air ductinG....................................................................................................................................................................10
addItIonal thermostat funCtIonIng for duCtIng motor Control...............................................................................................10
tHe diSPLay deScriPtion of controLS and SyMboLS...............................................................................................11
dIsplay ICons key..................................................................................................................................................................................................................11
menu struCture....................................................................................................................................................................................................................12
baSic inStructionS .............................................................................................................................................................12
reMote controL (oPtionaL).............................................................................................................................................13
type and replaCement of batterIes........................................................................................................................................................................13
coMMiSSioninG SettinGS...................................................................................................................................................13
adjustIng tIme, day, month and year.....................................................................................................................................................................13
adjustIng language..........................................................................................................................................................................................................13
functioninG and LoGic .....................................................................................................................................................14
uSer Menu...............................................................................................................................................................................15
pellet feed adjustment...................................................................................................................................................................................................15
stand - by....................................................................................................................................................................................................................................16
reset ..............................................................................................................................................................................................................................................16
cHrono....................................................................................................................................................................................16
programmIng example.....................................................................................................................................................................................................17
cLeaninG under uSer'S reSPonSibiLity.........................................................................................................................18
routine Maintenance .......................................................................................................................................................19
diSPLayS ..................................................................................................................................................................................20
aLarMS ....................................................................................................................................................................................21
Warranty conditionS .......................................................................................................................................................22

4
WARNINGS
The instruction manual is an integral part of the product: make sure that it always accompanies the appliance, even if transferred
to other owners or user or is transferred to another place. If it is damaged or lost,request another copy from the area technician.
This product must be destined for the use for which it has been expressly realised. The manufacturer is exempt from any liability,
contractual and extracontractual, for injury/damage caused to persons/animals and objects, due to installation, adjustment
and maintenance errors and improper use. Installation must be performed by qualied sta, which assumes complete
responsibility for the denitive installation and consequent good functioning of the product installed. It is necessary to
bear in mind all laws and national, regional, provincial and town council Standards present in the country the appliance
has been installed.
Extraame S.p.A. cannot be held responsible for the failure to comply with such precautions.
After removing the packaging, ensure that the content is intact and complete. If not so, contact the dealer where the appliance
was purchased.
All electric components that make up the product must be replaced with original spare parts exclusively by an authorised after-
sales centre, thus guaranteeing correct functioning.
SAFETY
The stove must not be used by persons (including children) with reduced physical, sensorial and mental capacities or who
are unskilled persons, unless they are supervised and trained regarding use of the appliance by a person responsible for their
safety.
Children must be controlled to ensure that they do not play with the appliance.
Do not touch the stove when you are barefoot or when parts of the body are wet or humid.
The safety and adjustment devices must not be modied without the authorisation or indications of the manufacturer.
Do not pull, disconnect, twist electric cables leaving the stove, even if disconnected from the electric power supply mains.
It is advised to position the power supply cable in a way that it does not come into contact with hot parts of the appliance.
The power supply plug must be accessible after installation.
Do not close or reduce the dimensions of the airing vents in the place of installation. The airing vents are indispensable
for correct combustion.
Do not leave the packaging elements within reach of children or unassisted disabled persons.
The hearth door must always be closed during normal functioning of the product.
When the appliance is functioning and hot to the touch, especially all external surfaces, attention must be paid
Check for the presence of any obstructions before switching the appliance on following a prolonged standstill period.
The stove has been designed to function in any climatic condition (also critical). In particularly adverse conditions (strong
wind, freezing) safety systems may intervene that switch the stove o. If this occurs, contact the technical after-sales service
and always disable the safety system.
If the ue should catch re, be equipped with suitable systems for suocating the ames or request help from the re
service.
This appliance must not be used to burn waste
Do not use any inammable liquids for ignition
During the lling phase do not allow the bag of pellets to come into contact with the product
The majolicas are top quality artisan products and as such can have micro-dots, crackles and chromatic imperfections.
These features highlight their valuable nature. Due to their dierent dilation coecient, enamel and majolica produce
crackling,. which demonstrate their eective authenticity. To clean the majolicas, it is recommended to use a soft, dry cloth. If
a detergent or liquid is used, the latter could penetrate inside the crackles, highlighting the same.
ROUTINE MAINTENANCE
Based on the Decree 22 January 2008 n°37 art.2, routine maintenance means interventions aimed at reducing degradation from
normal use, as well as dealing with accidental events entailing the need of rst interventions, which however do not modify the
structure of the system upon which one is intervening or its intended use according to the prescriptions foreseen by technical
standards in force and by the manufacturer's use and maintenance booklet.
ENGLISH | INGLESE

5
SAFETY DEVICES
SAFETY DEVICES
KEY: * = PRESENT,  = NOT PRESENT
STOVES
Circuit board: intervenes directly by sending the product
into alarm conditions until complete cooling, in the case
of: breakage of ue gas motor, pellet feed motor breakage,
black out (if more than 10 seconds), no ignition
*
Insert blocking micro switch: if the end run micro switch
warns that the insert is not blocked, electric energy does
not pass to power it
-
Electronic pressure switch: in the event of inadequate
depression, it takes the machine to alarm conditions *
F 2.5 A 250 V fuse (stoves): protects the machine from
violent current drops *
85°C calibrated mechanical bulb with manual rearm:
intervenes by blocking fuel feed whenever the pellet tank
t° reaches the limit of 85°C. Rearm must be performed
by qualied sta and/or the manufacturer's technical
after-sales assistance.
*
Pellet feed-box temperature control probe: if the tank
over-heats, the machine automatically modulates to return
to normal temperature values (*in the models envisioned)
*
Mechanical air pressure switch: blocks the pellet in the
event of insucient depression (in the models envisioned) *
INSTALLATION
The installation must be in compliance with:
UNI 10683 (2005) heat generators fed with wood and other
solid fuels: installation.
The chimneys must be in compliance with:
UNI 9731 (1990) chimneys: classication based on thermal
resistance.
EN 13384-1 (2006) Thermal and uid dynamic calculation
methods.
UNI 7129 point 4.3.3 Fire Department dispositions, local rules and
prescriptions.
UNI 1443 (2005) chimneys: general requisites.
UNI 1457 (2004) chimneys: clay/ceramic ue liners.
NATIONAL, REGIONAL, PROVINCIAL AND TOWN
COUNCIL REGULATIONS
It is necessary to bear in mind all laws and national, regional,
provincial and town council Standards present in the country
the appliance has been installed.
GLOSSARY
CLOSED HEARTH APPLIANCE
Heat generator which opening is only allowed through the
loading of the fuel during use.
BIOMASS
Biological material, excluding the material incorporated in
geological formations and transformed into fossils.
BIOFUEL
Fuel produced directly or indirectly by biomass.
CHIMNEY
Vertical pipe with the aim of collecting and expelling the fuel
products coming from only one appliance, at a convenient
height from the ground.
SMOKE CHANNEL OR FITTING
Pipeor connecting element between heatgeneratorappliance
and chimney to evacuate combustion products.
INSULATION
Group of set-ups and materials used to prevent the
transmission of heat through a wall that separates rooms with
dierent temperatures.
CHIMNEY CAP
Device positioned at chimney peak to ease the dispersion of
combustion products into the atmosphere.
CONDENSATE
Liquid products that form when the combustion gas
temperature is lower or equal to the water dew point.
HEAT GENERATORS
Appliance which allows to produce thermal energy (heat)
through the rapid transformation, via combustion, of the
chemical energy of the same fuel.
GATE VALVE
Mechanism for modifying the combustion gas dynamic
resistance.
COMBUSTION PRODUCT EVACUATION SYSTEMS
Flue gas exhaust system independent from the appliance
constituted by a tting or smoke channel, chimney or
individual ue and chimney cap.
FORCED DRAUGHT
Air circulation by means of the fan activated by electric motor.
NATURAL DRAUGHT
Draught which is determined in a chimney/ue for eect of
the volume mass dierence existing between smoke (hot) and
surrounding atmosphere air, without any mechanical intake
aid installed inside it or at its peak.
ENGLISH | INGLESE

6
RADIATION AREA
Area immediately near the hearth in which the heat caused by
combustion is diused, where no combustion materials must
be present.
REFLUX AREA
Area where leaking of the combustion products is veried,
from the appliance towards the installation room.
The installation must be preceded by checking the chimneys,
ues or unload terminals positioning of appliances similarly
to:
Installation prohibitions
Legal distances
Limitations disposed by local administrative regulations
or particular authority prescriptions.
Conventional limitations deriving from condominium
regulations, constraints or contracts.
INSTALLATIONS ALLOWED
Only appliances working in a sealed manner respect to the
room or which do not place the room in depression respect to
the external environment, can exist or be installed in the room
where the heat generator will be installed.
Appliances for cooking food and relative hoods without
extractor are only allowed in kitchens.
INSTALLATIONS NOT ALLOWED
In the room where the heat generator will be installed the
following must not pre-exist or be installed:
hoods with extractor.
collective type ventilation pipes.
Should these appliances be in rooms adjacent, communicating
with the installation room, the simultaneous use of the heat
generator is forbidden, where a risk exists of one of the two
rooms being placed in depression respect to the other.
CONNECTION TO THE SMOKE EVACUATION SYSTEM
UNI 10683 (2005) Standard
SMOKE CHANNEL OR FITTINGS
To mount the smoke channels, non-ammable elements will
have to be used, ideal for resisting combustion products and
their eventual condensing.
The use of exible metal and asbestos cement pipes to
connect the appliances to the ue is forbidden, even for pre-
existing smoke channels.
There must be continuity between the smoke channel and the
ue so that the ue does not lean on the generator. The smoke
channels must not cross rooms where the installation of the
combustion appliances is not allowed.
The mounting of the smoke channels must be carried out in
order to guarantee smoke seal for the appliance functioning
conditions, limit the forming of condensate and avoid it being
transported towards the appliance.
The mounting of horizontal routes must be avoided.
For appliances where ceiling or wall non-coaxial discharges
with respect to the appliance combustion product outlet have
to be reached, the direction changes will have to be realised
using open bends not greater than 45° (see gures below).
For the heat generator appliances equipped with electric fan
for expelling combustion products, the instructions below
must be followed:
45°
<
45°
<
The horizontal routes will have to have a minimum
upward slope of 3%
The length of the horizontal route must be minimal and,
however, not longer than 3 metres
The number of direction changes including the one for
eect of using the "T" element must not be more than 4.
In any case, the smoke channels must seal the combustion and
condensate products and be insulated if they pass outside the
installation room.
The use of counterslope elements is forbidden.
The smoke channel must allow the recovery of soot or be
brushable.
The smoke channel must have constant section. Any section
changes are only allowed at the ue coupling.
It is forbidden to have other air supply channels and pipes for
plant engineering, especially if over-sized, transit inside the
smoke channels.The mounting of manual draught adjustment
devices on forced draught appliances is forbidden.
ENGLISH | INGLESE
Insulating
product
Flue
pipe
Inspection

BC
A
S
< 3 m
3 - 5 %
7
CHIMNEY OR INDIVIDUAL FLUE
The chimney or individual ue must respond to the following requisites:
seal the combustion products, be waterproof and adequately insulated in line with the use conditions;
be realised with materials which resist the normal mechanical stress, heat, action of the combustion products and any
condensate;
have mainly vertical progress with deviations from the axis not higher than 45°;
be adequately distanced from fuel or ammable materials through air space or opportune insulation;
have preferably circular internal section: the square or rectangular sections must have round corners with a radius not
lower than 20 mm;
have constant internal section, free and independent;
have rectangular section with max. ratio between the sides of 1.5.
It is recommended that the smoke pipe be equipped with a collection chamber for solid materials and any condensate situated
under the smoke channel inlet, so that it can be easily opened and inspected from airtight door.
REFERENCES INFLAMMABLE OBJECTS NONINFLAMMABLE OBJECTS
A 200 mm 100 mm
B 1,500 mm 750 mm
C 200 mm 100 mm
Minimum 80 cm2
S= oor protection
Air inlets
Chimney cap
Flue
Inspection
Inspection
Flue
Inspection
ENGLISH | INGLESE

< 3 m
45°
45°
50 cm
< 5 m > 5 m < 5 m
50 cm
H min
β
>A
<A
>50 cm
Z
8
External pipe
that is isolated
Inspection
Inspection
Appliance connection to the ue and combustion products evacuation
The ue must receive the discharge from only one heat generator.
Direct discharge towards closed spaces is forbidden, even with clear sky.
The direct discharge of the combustion products must be at roof and the smoke pipe must have the features provided in the
"Chimney or individual ue" section.
CHIMNEY CAP
The chimney cap must comply with the following requisites:
have an internal section equivalent to that of the chimney;
have useful outlet section not lower than double the chimney internal section;
be built in order to avoid rain, snow, foreign bodies penetrating the chimney and so that, in the event of winds in any
direction and inclination, the discharge of the combustion products is assured.
be positioned in a way to guarantee an adequate dispersion and dilution of the combustion products and, however, outside
the reux area in which the formation of counterpressures occurs. Such area has dierent dimensions and conguration
depending on the covering inclination angle. It is therefore necessary to adopt the minimum heights indicated in the gure
layouts below.
The chimney cap must not have mechanical intake means.
FLAT ROOF SLOPING ROOF
Z=REFLUX AREA
ENGLISH | INGLESE

9
CONNECTION TO EXTERNAL AIR INLETS
The appliance must be able to use the necessary air to guarantee regular functioning through external air inlet. The air inlets
must comply with the following requisites:
have a total free section of at least 80 cm².
must be protected by grates, metal net or suitable protections as long as they do not reduce the minimum section stated
in the previous point and positioned in order to avoid them being obstructed.
If the combustion agent air is withdrawn directly from outside through a pipe, a downward bend must be mounted outside
or a protection against the wind and no grates or similar must be positioned, (it is recommended that the air vent always
communicates directly with the installation room even if the air is withdrawn from outside through a pipe). The air ow can also
be obtained from an adjacent room, as long as the ow takes place freely through permanent openings communicating with
the outside.
The adjacent room, with respect to the installation room, must not be put in depression with respect to the external environment
by means of reverse draught caused by the presence of another used appliance or intake device in such room. The permanent
openings in the adjacent room must comply with the above-described requisites. The adjacent room cannot be set up as garage,
storage for combustion material or activity with danger of re.
INSULATION, FINISHINGS, COVERING AND SAFETY RECOMMENDATIONS
The coverings, independently from the materials from which they are made, must constitute a self-supporting construction
with respect to the heating block and not be in contact with it.
The cross members and nishings in wood or combustion materials must be positioned outside the hearth radiation area or
adequately insulated.
If coverings in combustion material or sensitive to heat exist in the space above the generator, an insulating and non combustible
protection diaphragm must be inserted.
Elements in combustible or inammable material like wooden furniture, curtains, etc. directly exposed to the hearth radiation,
must be positioned at a safe distance. The appliance installation must guarantee easy access for cleaning the appliance itself,
discharge gas pipe and ue.
CHIMNEY CAPS, DISTANCES AND POSITIONING
Roof inclination Distance between the ridge and the chimney Minimum chimney height (measured from outlet)
β A (m) H (m)
15° < 1,85 0.50 m over the ridge
> 1,85 1,00 m from roof
30° < 1,50 0.50 m over the ridge
> 1,50 1,30 m from roof
45° < 1,30 0.50 m over the ridge
> 1,30 2,00 m from roof
60° < 1,20 0.50 m over the ridge
> 1,20 2.60 m from roof
Open the tank lid and load the pellets using a scoop.
PELLETS AND FEEDING
The pellets used must comply with the features described by
the Standard:
Ö-norm M 7135
DIN plus 51731
UNI CEN/TS 14961
Extraame recommends the use of pellets with
a 6 mm diameter for its products.
THE USE OF EXPIRED PELLETS OR ANY OTHER MATERIAL DAMAGES THE FUNCTIONS OF YOUR STOVE AND CAN
DETERMINE THE INVALIDITY OF THE WARRANTY AND THE ANNEXED RESPONSIBILITY OF THE MANUFACTURER.
ENGLISH | INGLESE

VIVIANA PLUS
10
HOT AIR DUCTING
The pipe destined for ducting the hot air must have an internal diameter of 80 mm, be insulated and protected from heat loss.
The length must not exceed 6 metres.
Installation of the pipes used for ducting the hot air must be performed by qualified staff and/or the manufacturer's
technical after-sales assistance.
FOR THIS PRODUCT IT IS MANDATORY TO DUCT THE HOT AIR.
IT IS NOT POSSIBLE TO DEACTIVATE THE DUCTING MOTOR.
DO NOT COVER OR CLOSE DUCTING!
J
DUCTING OF THE VIVIANA PLUS MODEL CANNOT BE ADJUSTED. BY DEFAULT ITS FUNCTIONING IS PARALLEL TO
FRONT VENTILATION. SEE THE FOLLOWING CHAPTER FOR ITS MANAGEMENT.
ADDITIONAL THERMOSTAT FUNCTIONING FOR DUCTING MOTOR CONTROL
For models with ducting motor there is also the possibility of thermostatting the motor itself. The connection of an external
thermostat will allow to control the ducting motor independently from stove functioning.
At this point just set the desired temperature on the thermostat. The thermostat will control the functioning of the second
motor:
with temperature to be reached (closed contact) the second
motor will follow the trend of the stove.
when the temperature has been reached (open contact), it takes the
ducting motor to 1st speed and will be
displayed by the ashing LED relative to the
ducting motor.
The ducting thermostat clamp is tted with jumper as per standard.
See example drawing above.
The ducting extension is found in the
accessory pack inside the stove.
It is mounted by means of the 4 supplied screws.
ENGLISH | INGLESE

11
THE DISPLAY DESCRIPTION OF CONTROLS AND SYMBOLS
ON/OFF
BUTTON
DISPLAY OF VARIOUS
TEXT MESSAGES
DISPLAY
OF POWER
TEMPERATURE SETTING OPERATION POWER
ADJUSTMENT
DISPLAY ICONS KEY
Indicates the presence of an alarm.
On: indicates the presence of an alarm
O: indicates the absence of alarms
Flashing: indicates the deactivation of the depression sensor.
It indicates weekly programming functioning
Indicator on = Weekly programming active
Indicator o = Weekly programming not active
Indicates the environment temperature status
O = the T° read by the probe is over the set temperature set
On = the T° read by the probe is below the set temperature set
Indicates the stby function
O = Stby deactivated
On = Stby activated
Ign-plug
O = ign-plug active
On = ign-plug deactivated
Flashing = Ignition phase
Additional external thermostat input status
O = open contact
On = closed contact
It indicates functioning of the fumes motor.
O = fumes motor not working
On = fumes motor working
Flashing = breakdown
It indicates the communication between remote control and
stove. Every time a key is pressed on the remote control the
indicator must switch on. If the indicator is always on it indicates
that the communication between remote control and stove is
blocked.*
1
It indicates functioning of the tangential fan
O = not working
On = working
Not used
2
Not used
Additional ducted thermostat input status:
On: closed contact (to be reached)
Flashing: the motor is running at minimum, in modulation
mode (input=open)
It indicates functioning of the pellet feed motor.
O = pellet feed motor deactivated
On = pellet feed motor active.
ENGLISH | INGLESE

3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
12
BASIC INSTRUCTIONS
The following recommendations must be followed the rst
times the stove is ignited:
It is possible that slight odours are produced due to the
drying of the paints and silicones used. Do not remain in the
environment for long periods.
Do not touch the surfaces as they could still be unstable.
Air the room well several times.
The hardening of the surfaces is terminated after several
heating processes.
This appliance must not be used to burn waste.
Before igniting the stove, the following points must be veried:
the feed-box must be full of pellets.
the combustion chamber must be clean.
The burn pot must be completely free and clean.
check the hermetic closure of the re door and the ash
drawer.
make sure the power supply cable is connected correctly.
the bipolar switch in the rear right part must be
positioned on 1.
DO NOT USE ANY INFLAMMABLE LIQUIDS FOR IGNITION!
DO NOT ALLOW THE BAG OF PELLETS TO COME INTO CONTACT WITH THE BOILING HOT STOVE DURING THE FILLING PHASE!
IN THE EVENT OF CONTINUOUS NO IGNITION, CONTACT AN AUTHORISED TECHNICIAN.
IT IS FORBIDDEN TO USE THE APPLIANCE WITHOUT THE DIVIDER AND/
OR GLASS PROTECTION SEE FIGURE AT THE SITE JEOPARDISES THE
SAFETY OF THE PRODUCT AND LEADS TO THE IMMEDIATE VOIDING OF
THE WARRANTY PERIOD. IN THE CASE OF WEAR OR DETERIORATION
REQUEST AFTERSALES ASSISTANCE FOR REPLACEMENT OF THE PART
REPLACEMENT THAT IS NOT UNDER GUARANTEE AS THE COMPONENT IS
SUBJECT TO WEAR.
YEAR
2  3
MONTH
2  3
DATE
2  3
MINUTES
2  3
HOURS
2  3
DAY
2  3
ENABLE CHRONO
2  3
STOP PROG 2
2  3
MON  FRI
2  3
STOP PROG 1
2  3
START PROG 1
2  3
START PROG 2
2  3
PELLET
2  3
STAND BY
2  3
RESET
2  3
CONFIRM
WITH KEY 1
IT,EN,FR,DE,ES
2  3
SET CLOCK
SET CHRONO
LANGUAGE
USER
To access the menu, keep key 5 pressed for a few seconds.
MENU STRUCTURE
MON  FRI
2  3
Key 1 to conrm parameter/
programming and exit.
Keys 2 and 3 to set data/parameters.
Keys 4 and 5 to go forward or backward
in the menu.
ENGLISH | INGLESE

X
3
13
ENGLISH | INGLESE
REMOTE CONTROL OPTIONAL
The heating power, the desired room temperature (only
with the room probe option connected) and the appliance
ignition/switch o, can be adjusted using the remote control.
To ignite the stove, press key 1 for a few seconds; the
appliance will automatically enter the ignition phase. It is
possible to adjust power by using keys 4 and 5, whereas the
wanted temperature can be adjusted using keys 2 and 3. To
switch the stove o, keep key 1 pressed for a few seconds.
1
2
34
5
TYPE AND REPLACEMENT
OF BATTERIES
The batteries are housed in the
lower part of the remote control.
To replace them, remove
the battery holder (as indicated
in the gure at the back of the
remote control), remove or
insert the battery according to the
symbol on the remote control and
on the battery itself.
For operation, 1 CR2025, 3V lithium buer battery is
required.
If the remote control is o because it has no
batteries, stove can be controlled from the
control panel on top of it.
While replacing the battery, pay attention to the
polarity by observing the symbol on the inside
compartment of the remote control.
The batteries used contain metals harmful
for the environment. They must therefore
be disposed of separately in appropriate
containers.
COMMISSIONING SETTINGS
Once the power cable at the back of the stove has been
connected, move the switch, also located on the back, to (I).
The switch at the back of the stove powers the stove board.
The stove remains o and a rst screen appears on the panel
reading OFF.
ADJUSTING TIME, DAY, MONTH AND YEAR
CONTROLS PROCEDURE
Press key 5 for a few seconds, until the text SET CLOCK
appears.
Confirm using key 5.
Use key 3 to assign the day.
Press key 5.
Use the same procedure (5 to move forward 3 to set) to
adjust the hours, minutes, day, month and year.
Press key 1 several times to conrm and exit the Menu.
SET CLOCK
DAY MON, TUE, WED, ...SUN
HOURS 0...23
MINUTES 00...59
DATE 1...31
MONTH 1...12
YEAR 00...99
ADJUSTING LANGUAGE
CONTROLS PROCEDURE
Press key 5 for a few seconds, until the text SET CLOCK
appears.
Press key 3 twice until set Language.
Conrm using key 5.
Select the language using key 3.
Press key 1 several times to conrm and exit the Menu.
LANGUAGE
ITALIAN
ENGLISH
GERMAN
FRENCH
SPANISH

start
14
FUNCTIONING AND LOGIC
IGNITION
Once the points listed previously have been checked, press key 1 for three seconds to ignite the stove.
15 minutes are available for the ignition phase. After ignition and having reached the control temperature, the stove interrupts
the ignition phase and passes to STARTING.
STARTING
During the starting phase, the stove stabilises combustion, increasing it progressively, to then start ventilation and pass on to
WORK.
WORK
During the work phase, the stove reaches the set power; see following item.
ADJUSTING POWER SETTING
Set the functioning power from 1 to 5 (settable using keys 4 - 5).
Power 1 = minimum level - Power 5 = maximum level.
Proportionally, the tangential fan will work at the same power as the pellet feed.
(5 power = 5 tangential fan speed)
ROOM TEMPERATURE
The appliance can check the room temperature by means of the room probe (as per standard).
The wanted room temperature can be set from 07° to 40°C using keys 2 and 3.
Having reached the set temperature, it will automatically go to the minimum or switch o activating the
STAND BY function,(see chapter on following page), reducing pellet consumption to a minimum.
BURN POT CLEANING
While working, the stove has an internal counter which cleans the burn pot after a set amount of time.
This phase will be shown on the display, it will bring the stove to a lower power level and will increase the ue gas motor for a
programmed amount of time.
When the cleaning phase is nished, the stove will continue work going back to the selected power level.
SWITCHOFF
Press key 1 for three seconds.
When the operation has been performed, the appliance automatically enters the switch- o phase, blocking the supply of
pellets.
The ue exhaust motor and the hot air ventilation motor will remain on until the temperature of the stove has dropped
below the factory parameters.
REIGNITION
The stove can only be re-ignited if the ue gas temperature has lowered and the preset timer has been reset to zero.
J
FUNCTIONING CYCLE
OFF èSTART è IGNITION è STARTING è WORK è BURN POT CLEANING èFINAL CLEANING è
ENGLISH | INGLESE

15
USER MENU
PELLET FEED ADJUSTMENT
The following menu allows the adjustment of pellet feed as a percentage.
If the stove has functioning problems owing to the quantity of pellets, adjust pellet feeding directly from the control board.
The problems correlated to the amount of fuel can be divided into 2 categories:
NO FUEL:
the stove can never develop a suitable ame, tending to remain very low even at high powers.
at minimum power the stove tends to almost switch-o taking the stove into “NO PELLETS” alarm condition.
when the stove displays the“NO PELLETS” alarm, there may be non-burned pellets inside the burn pot.
EXCESS FUEL:
the stove develops a very high ame even at low power.
the panoramic glass is very dirty, obscuring it almost totally.
the burn pot tends to become encrusted, blocking the holes for air intake due to the excessive pellet feed, as it is only
burned partially.
The regulation to be performed is a percentage. Therefore a modication of this parameter will lead to a proportional
variation of all stove feeding speeds. Feeding is from -30% to +20%.
Follow the procedure on the display to perform this adjustment:
J
NO IGNITION ALARM
FIRST IGNITION COULD EVEN FAIL AS THE AUGER IS EMPTY AND IS NOT ALWAYS ABLE TO LOAD THE BURN POT
WITH THE REQUIRED AMOUNT OF PELLETS ON TIME TO REGULARLY START THE FLAME.
IF THE PROBLEM OCCURS AFTER ONLY A FEW MONTHS WORKING, CHECK THAT ROUTINE CLEANING STATED IN THE
STOVE BOOKLET, HAS BEEN CARRIED OUT CORRECTLY.
ENGLISH | INGLESE
J
CLEAN CHECK UP
SHOULD THE ALARM "CLEAN CHECK UP" BE TRIGGERED, MAKE SURE
THAT THE BOTTOM OF THE BURN POT IS FREE OF RESIDUES OR SCALES.
THE HOLES AT THE BOTTOM MUST BE COMPLETELY FREE TO GUARANTEE
CORRECT COMBUSTION.
THE ABOVE INDICATED "PELLET FEED REGULATION" FUNCTION
CAN BE USED TO ADJUST COMBUSTION BASED ON THE DESCRIBED
REQUIREMENTS.
IF THE ALARM PERSISTS AND THE ABOVE LISTED CONDITIONS HAVE
BEEN CHECKED, CONTACT THE QUALIFIED AFTERSALES ASSISTANCE
CENTRE.
CONTROLS PROCEDURE
Press key 5 for a few seconds, until the text SET CLOCK appears.
Press key 3 several times to reach SET USER.
Conrm using key 5.
Pellet is displayed.
By means of the keys 2 and 3 the feeding can be increased (3) or decreased (2) during the WORK phase.
Press key 1 several times to conrm and exit the Menu.
BURN POT BOTTOM

16
ENGLISH | INGLESE
STAND  BY
The Stby function is used if immediate stove switch-o is required when temperature has been
reached.
The STBY function can be set at ON or OFF using the procedure that will be described.
In the factory the STBY function is always set at OFF (indicator o)
STBY FUNCTION SET AT ON
If the Stby function is active (ON), when the stove reaches the room temperature set exceeding it by 2°C, it will switch o
after a factory set delay time, displaying STAND  BY.
When the room temperature is 2°C lower than the setting, the stove will start to work again at the power set on the display,
viewing WORK.
STBY FUNCTION SET AT OFF FACTORY SETTING
If the Stby function is not active (OFF), if the stove reaches the room temperature set, it will go to minimum, modulating and
displaying MODULATE. When the room temperature is lower by 2°C than the setting, the stove will start to work again at
the power set on the display, showing WORK.
CONTROLS PROCEDURE
Press key 5 for a few seconds, until the text SET CLOCK appears.
Press key 3 three times UNTIL USER.
Press key 5 twice.
Select "ON" with keys 2 or 3 to activate or "OFF" to deactivate.
Press key 1 several times to conrm and exit the Menu.
CHRONO
The chrono allows to program 2 time spans within a day to use every day of the week.
The switch-on and switch-o time can be set in every time span. along with the days of use
of the programmed time span and the desired temperature.
RECOMMENDATIONS
The ignition and switch-o times must be within the arc of
one day, from 0 to 24 and not over several days:
Before using the chrono function, set the current day and
time. Therefore check that the points listed in the “Set clock”
sub-chapter have been followed, so that the chrono function
works. Aside from programming it, activate it as well.
Example:
Switch-on time 07:00 CORRECT
Switch-o time 18:00
Switch-on time 22:00 INCORRECT
Switch-o time 05:00
RESET
Allows to reset all values modiable by the user to the default values.
The modied data are:
SET TEMPERATURE = 35°C
SET POWER = 5
ENABLE CHRONO = OFF
START PRG1=OFF
STOP PRG1 = OFF
MONDAY PRG1 = OFF
.......all chrono parameters OFF
PELLET = 00%
STAND BY = OFF

17
2ND TIME PERIOD SWITCHON
At this point, the second time period must be programmed.
The sequence to be followed is the same and is repeated as for the 1ST TIME PERIOD SWITCHON.
On this occasion it is only necessary to enter the time, for example start at 15:00 and Stop at 22:00 and to activate the days
Saturday and Sunday by setting them at "ON".
CONTROLS PROCEDURE:
Press key 5 for a few seconds, until the
text SET CLOCK appears.
Press key 3 once, the SET CHRONO text
will appear.
SET
CLOCK
SET
CHRONO
1ST TIME PERIOD SWITCHOFF
Using keys 2 - 3, enter the time“12:00”,
which corresponds to the switch-o
time of the 1st time period. The STOP
PRG1 text will appear followed by the
time set.
To conrm and continue programming,
press button 5. Press button 4 to go
back to the previous parameter.
STOP
PRG1
12:00
ENABLE CHRONO
Press key 5, ENABLE CHRONO and OFF
will appear.
Press key 3 to activate or deactivate the
CHRONO function. Select ON.
ENABLE
CHRONO
ON
ENABLE 1ST TIME PERIOD DAYS
To do this, use keys 3 and 5 in the
following way:
Key 5 - allows to scroll the various
days, the text with the day of the week
will appear, followed by OFF
Use key 3 to enable-disable (ON/OFF)
all days.
MONDAY..
PRG1
ONOFF
Press key 5 to conrm and continue
programming.
The scrolling text
START PRG1 OFF will appear.
START
PRG1
OFF
Press key 5 to conrm and continue
programming.
The text START PRG2 OFF will appear.
START
PRG2
ONOFF
1ST TIME PERIOD SWITCHON
Using keys 2 - 3, enter the time“08:00”,
which corresponds to the switch-on
time of the 1st time span. The START
PRG1 text will appear followed by the
time set.
To conrm and continue programming,
press button 5. Press button 4 to go
back to the previous parameter.
START
PRG1
08:00
2ND TIME PERIOD SWITCHON
At this point, the second time period
must be programmed.
The sequence to be followed is the
same and is repeated as for the 1ST
TIME PERIOD SWITCHON.
START
PRG2
15:00
J
WHEN THE WEEKLY PROGRAMMER IS ACTIVE, A BOX OF THE RELATIVE ICON WILL APPEAR ON THE
CONTROL BOARD.
PROGRAMMING EXAMPLE
Let's suppose that the weekly programmer function is to be used and 2 time periods are to be used in the following way:
1st time period: from 08:00 to 12:00 every day of the week excluding Saturday and Sunday
2nd time period: from 15:00 to 22:00 only Saturday and Sunday.
ENGLISH | INGLESE

18
CLEANING UNDER USER'S
RESPONSIBILITY
Some images could be oset from the original model.
DAILY
Burn pot: remove the burn pot from the relevant
compartment and free the holes using the appropriate re
irons supplied, remove the ash from the burn pot using
a suction device. Suck the ash deposited in the brazier
compartment.
MONTHLY
Cleaning the heat exchanger:the heat exchangers
chamber must be cleaned every month as the soot
deposited on the rear of the cast iron hearth wall blocks the
regular ow of fumes. When cleaning has been completed,
re-position the extractable cast iron with the opposite
movement used to remove it. Turn the lockbolt to return it
to its original position.
Scrapers:
Cleaning of the heat exchangers allows to guarantee
constant heat output through time. This type of
maintenance must be performed at least once a day. To do
this, just use the relevant scrapers positioned in the upper
part of the stove, moving them up and down several times.
WEEKLY
Cleaning the ash drawer:
Empty the ash drawer every week or when required.
It is therefore recommended to remove the ash in the
combustion chamber at least once a week using a suitable
suction device.
Make sure that the ash is completely cold before emptying it into a suitable container. * The “Chimney sweep” bin is
an accessory available from the company.
ENGLISH | INGLESE

A
B
C
D
E
FF
A
F
E
E
19
ROUTINE MAINTENANCE
In order to guarantee proper functioning and safety of the device, the operations indicated below must be performed every
season or more often when necessary.
DOOR, ASH DRAWER AND BURN POT GASKETS
The gaskets guarantee the tightness of the stove and its consequent good functioning.
These must be checked regularly: if they should be worn or damaged they must be replaced immediately.
These operations must be carried out by a qualied technician.
CONNECTION TO THE FLUE
Suck and clean the pipe that leads to the ue yearly or anytime that it is necessary. If there are horizontal tracts the residues must
be removed before they can obstruct ue passage.
NONCLEANING JEOPARDISES SAFETY.
IF THE POWER SUPPLY CABLE IS DAMAGED, IT MUST BE REPLACED BY THE AFTERSALES SERVICE OR BY A
SIMILARLY QUALIFIED PERSON, SO AS TO AVOID ALL RISKS.
FOR CORRECT FUNCTIONING, THE STOVE MUST UNDERGO ROUTINE MAINTENANCE BY A QUALIFIED TECHNICIAN,
AT LEAST ONCE A YEAR.
AFumes motor (disassembly and cleaning and
fumes pipe), new silicone in envisioned points

BInspections of gaskets, ash drawer and door
(replace them and apply silicone where
envisioned)

CCombustion chamber (total cleaning of the entire
chamber) and cleaning the ignition plug tube.

DFeed box (complete emptying and cleaning).

ERoom air fan disassembly and removal of dust and
debris of any pellets

FCheck air intake pipe and cleaning of the ow
sensor

ENGLISH | INGLESE

20
Displays
Display Reason solution
off Stove o -
staRt The start phase is in progress -
pellet feeDing The feeding of the pellet during the ignition phase is in progress
ignition The ignition phase is in progress -
staRt-up The start phase is in progress -
WoRk The normal work phase is in progress -
MoDulation The stove is modulating -
BuRn pot Cleaning The automatic burn pot cleaning is in
progress.
The automatic burn pot cleaning (not in 1st power) is performed
at pre-established intervals of continued working.
final Cleaning When the stove is switched-o, nal cleaning is in progress. The nal cleaning phase lasts about 10
minutes.
stanD By Stove o due to temperature reached
and in stand-by for re-ignition. To deactivate the STAND-BY function see the specic chapter.
stanD By ext Stove o due to an external
thermostat, waiting for re-ignition To deactivate the STAND-BY function see the specic chapter.
Cooling stanD-By A new ignition is attempted when
the stove has just been switched-o
When the stove switches o, it is necessary to wait until complete
fumes motor switch o and then clean the burn pot.
The stove can only be re-ignited when these operations have
been performed.
Cooling stDBy-
BlaCk out The stove is cooling due to black out On completion of the cooling phase, it will re-ignite automatically.
loW
Room thermostat set at minimum
value.
In this way the stove only works at 1st power independently
from the power set. To escape this function just raise the room
temperature using button 4 and then key 2.
Hot Set room thermostat set at maximum
value.
The stove works at set start, without ever modulating. To escape
this function just lower the set temperature using key 4 and then
key 1.
englisH | inglese