Extreme Networks Alpine 3802 Manual

Extreme Networks, Inc.
3585 Monroe Street
Santa Clara, California 95051
[phone]
http://www.extremenetworks.com
Extreme Networks
Consolidated “i” and “e”
Series Hardware Installation
Guide
Published: October 2006
Part number: 100093-00 Rev. 11

2
Alpine, Alpine 3804, Alpine 3802, Altitude, BlackDiamond, BlackDiamond 6808,
BlackDiamond 6816, EPICenter, Ethernet Everywhere, Extreme Ethernet Everywhere, Extreme
Networks, Extreme Turbodrive, Extreme Velocity, ExtremeWare, ExtremeXOS, ExtremeWorks,
GlobalPx Content Director, the Go Purple Extreme Solution Partners Logo, Sentriant,
ServiceWatch, Summit, Summit24, Summit48, Summit1i, Summit4, Summit5i, Summit7i,
Summit 48i, SummitRPS, SummitGbX, Triumph, vMAN, the Extreme Networks logo, the
Alpine logo, the BlackDiamond logo, the Summit logos, the Extreme Turbodrive logo, and
the Color Purple, among others, are trademarks or registered trademarks of Extreme
Networks, Inc. or its subsidiaries in the United States and other countries. Other names and
marks may be the property of their respective owners.
© 2006 Extreme Networks, Inc. All Rights Reserved.
Specifications are subject to change without notice.
Merit is a registered trademark of Merit Network, Inc. Solaris and Java are trademarks of Sun
Microsystems, Inc. in the U.S. and other countries. Avaya is a trademark of Avaya, Inc.
All other registered trademarks, trademarks and service marks are property of their
respective owners.
For safety compliance information, see Appendix A.
Author: Diana Alonzo
Production: Diana Alonzo

Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 3
Contents
Preface
Introduction 13
Conventions 14
Related Publications 15
About This Guide 16
How To Use This Guide 16
Part 1 Common Features
Chapter 1 Common Switch Features
Software Images 21
Full-Duplex Support 22
Management Ports 22
Mini-GBIC Type and Hardware/Software Support 23
Mini-GBIC Types 23
GBIC Type and Hardware/Software Support 23
Part 2 Site Planning
Chapter 2 Site Preparation
Planning Your Site 28
Step 1: Meeting Site Requirements 28
Step 2: Planning for Stacking (Summit “e” Series Only) 28
Step 3: Evaluating and Meeting Cable Requirements 28
Step 4: Meeting Power Requirements 28
Meeting Site Requirements 28

4Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Operating Environment Requirements 29
Rack Specifications and Recommendations 39
Planning for Stacking 41
Maximum Switches in a Stack 41
Planning Switch Placement in the Rack 43
Evaluating and Meeting Cable Requirements 44
Cabling Standards 44
Cable Labeling and Record Keeping 45
Installing Cable 45
RJ-45 Connector Jackets 48
Radio Frequency Interference 48
Making Network Interface Cable Connections 49
Meeting Power Requirements 49
Power Supply Requirements 50
AC Power Cable Requirements 50
DC Power Requirements 51
Replacing the Power Cable 52
Uninterruptable Power Supply Requirements 52
Applicable Industry Standards 53
Planning for Optical Budgets 53
Long-Range GBIC System Budgets 54
Part 3 Summit Switch
Chapter 3 Summit Switch Models
Summit 200 “e” Series Switches 60
Summit 200 “e” Series Switch Features 60
Summit 200 Series Switch Physical Description 61
Summit 200 Switch LEDs 63
Console Port 63
Port Connections 64
Summit 200 Automatic Failover 64
Full-Duplex Support 65
Summit 300 “e” Series Switches 65
Summit 300 Features 66
Summit 300-24 Switch 66
Summit 300-48 Switch 70
Summit 300-48 Switch LEDs 71
Load Sharing Power Supplies 73
Summit 300 Automatic Failover 74
Summit 400 “e” Series Switches 75
Summit 400-24 Switches 75

Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 5
Summit 400-48t switch 80
Port Connections 84
Management Port 84
Uplink Redundancy 85
Summit 400 “e” Series Optional Features 86
Summit “i” Series Switches 86
Memory Requirements 87
Port Connections 87
Summit1i Switch 88
LEDs 89
GBIC Ports 89
Power Sockets 89
Label 90
Reset Button 90
Console Port 90
Summit5i Switch 90
LEDs 92
GBIC Ports 92
Power Sockets 92
Label 93
Reset Button 93
Ethernet Management Port 93
Console Port 93
Summit7i Switch 93
LEDs 95
GBIC Ports 95
Reset Button 96
Console Port 96
Modem Port 96
Ethernet Management Port 96
PCMCIA Slot 96
Power Sockets 96
Label 96
Summit1i, Summit5i, Summit7i, and Summit48i Switch LEDs 97
Summit48i Switch 97
LEDs 98
GBIC Ports 98
Power Sockets 99
Label 99
Reset Button 99
Console Port 99
Summit48si Switch 100
LEDs 102
Mini-GBIC Ports 103

6Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Console Port 103
Power Supplies 103
Labels 104
Reset Button 104
Summit48si Switch LEDs 105
Chapter 4 Summit Switch Installation
Installation Summary 107
Mounting the Switch in a Rack 108
Placing the Switch on a Table or Shelf 112
Installing a Summit Stacked Configuration 112
Connecting Summit 400 Series Switches 114
Connecting Summit 200 Series and Summit 300-24 Switches 114
Verifying a Successful Installation 114
Removing the Switch from a Rack 115
Chapter 5 Installing and Connecting Summit Power Supplies
Installing or Removing an External Power Supply 45019 (EPS-LD) 118
Rack-mounting the EPS-LD unit 118
Connecting the EPS-LD to the Switch 119
Connecting the EPS-LD to Power 120
Removing an EPS-LD unit 121
Installing and Removing the Internal 600 Watt AC Power Supply (15412) 121
Installing an Internal 600-Watt Power Supply 122
Removing an Internal Power Supply 123
Installing an External Power System for a Summit 400 Switch 124
Rack Mounting the EPS-T 125
Adding a Second EPS-160 to the EPS-T 126
Removing an EPS-160 from the EPS-T 127
Installing and Removing Summit48si AC Power Supplies 127
Installing a Summit 48si AC Power Supply 127
Removing a Summit 48si AC Power Supply 127
Installing the AC Power Cable Retaining Bracket 128
Disconnecting a Power Cable with an Installed Cable Retaining Bracket 132
Installing the Summit48si Switch DC Power Supply 132
Preparing and Attaching the DC Power Supply Cable 134
Attaching the Connector to the DC Power Supply 135
Part 4 Alpine Switch

Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 7
Chapter 6 Alpine 3800 Series Switch Models
Features 139
Port Connections 140
Power Supplies 140
Power Supply LEDs 141
Fans 142
Alpine 3808 Switch 142
Alpine 3804 Switch 144
Alpine 3802 Switch 146
Alpine 3802 Switch LEDs 148
Alpine 3802 Power Versions 148
Chapter 7 Alpine 3800 Series Chassis Installation
Installation Summary 151
Safety Information 151
Installing the Chassis in a Rack 152
Grounding the Alpine 3800 Series Chassis 155
Removing the Chassis 156
Chapter 8 Installing and Connecting Alpine 3800 Series Switch Power Supplies
Installing an Alpine 3808 or Alpine 3804 AC Power Supply 160
Installing an Alpine 3808 or Alpine 3804 DC Power Supply 163
Selecting and Preparing DC Cabling 163
Installing the Power Supply 164
Attaching the Cables and Supplying Power 166
Supplying Power to the Alpine 3802 DC Power Supply 167
Selecting the Cabling 167
Attaching the Cables and Supplying Power 168
Verifying Successful Power Installation 168
Removing the Alpine 3808 or Alpine 3804 AC Power Supply 169
Removing the Alpine 3808 or Alpine 3804 DC Power Supply 170
Installing the Alpine 3800 Series Switch External Power Supply 171
Rack-Mounting the EPS-LD Unit 171
Connecting the EPS-LD to the FM-32Pi Module 172
Removing an EPS-LD Unit 174
Chapter 9 Alpine 3800 Series Switch Management Module
SMMi Memory 176
SMMi LEDs 176

8Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Installing SMMi Modules 177
Verifying the SMMi Installation 178
Replacing SMMi Modules 178
Chapter 10 Alpine 3800 Series I/O Modules
Configuring I/O Modules 181
GM-4Ti Module 183
GM-4Xi Module 184
GM-4Si Module 186
GM-16X3Module 187
GM-16T3Module 189
FM-24Ti Module 191
FM-24SFi Module 193
FM-24MFi Module 194
FM-32Ti Module 195
FM-32Pi Module 196
FM-8Vi Module 198
WM-4T1i Module 200
WM-4E1i Module 201
WM-1T3i Module 202
I/O Module LEDs 202
Installing I/O Modules 204
Verifying the I/O Module Installation 205
LEDs 206
Displaying Slot Status Information 206
Installing External Power 206
Removing I/O Modules 206
Chapter 11 Replacing the Alpine 3800 Series Switch Fan Tray
Removing the Alpine 3808 or Alpine 3804 Fan Tray 209
Installing the Alpine 3808 or Alpine 3804 Fan Tray 211
Part 5 BlackDiamond Switch
Chapter 12 BlackDiamond 6800 Series Switch Overview
Features 215
Port Connections 216
Fans 217
Switch Connectivity and the Backplane 217
Packet Switching and Routing 217
BlackDiamond 6816 Switch 218

Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 9
BlackDiamond 6808 Switch 222
BlackDiamond 6804 Switch 225
BlackDiamond Power Supplies 228
110 VAC Power Supplies 230
DC Power Supplies 231
Chapter 13 Installing a BlackDiamond 6800 Series Switch Chassis
Installation Summary 233
Safety Information 233
Installing the Chassis 234
Grounding the BlackDiamond 6800 Series Chassis 238
Removing the Chassis 238
Chapter 14 Installing and Connecting BlackDiamond 6800 Series Power
Supplies
Preparing for Installation 241
Installing a BlackDiamond 6800 Series AC Power Supply 243
AC Power Cable and Plug 244
Verifying a Successful Installation 245
Replacing a BlackDiamond 6800 Series AC Power Supply 246
Installing a BlackDiamond 6800 Series DC Power Supply 248
Selecting and Preparing the DC Cabling 248
Attaching the Cable to the Lugs 249
Installing the Power Supply 250
Verifying a Successful Installation 250
Removing a BlackDiamond 6800 Series DC Power Supply 251
Chapter 15 BlackDiamond 6800 Series Management Switch Fabric Module
Overview of the BlackDiamond Management Switch Fabric Module 253
MSM Activity 255
MSM Memory 256
MSM LEDs 257
Installing MSMs 257
Verifying the MSM Installation 260
Replacing MSMs 260
Chapter 16 BlackDiamond 6800 Series I/O Modules
Configuring I/O Modules 263
10GX3Module 264

10 Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
G8Ti Module 266
G8Xi Module 267
G12SXi Module 269
G16X3Module 270
G24T3Module 273
F48Ti Module 275
F96Ti Module 276
F32Fi Module 279
P3cSi, P3cMi, P12cSi, and P12cMi Modules 280
ARM 284
MPLS Module 287
A3cSi and A3cMi Modules 290
I/O Module LEDs 293
Installing I/O Modules 294
Verifying the I/O Module Installation 295
Displaying Slot Status Information 296
Replacing I/O Modules 296
Installing XENPAK Modules 297
Chapter 17 Replacing the BlackDiamond 6800 Series Switch Fan Tray
Removing a BlackDiamond 6800 Series Fan Tray 299
Installing a BlackDiamond 6800 Series Fan Tray 301
Part 6 Switch Operation
Chapter 18 Initial Switch and Management Access
Connecting Equipment to the Console Port 305
Logging In for the First Time 306
Part 7 Appendixes
Appendix A Safety Information
Important Safety Information 309
Power 309
Power Cable 310
Fuse 311
Connections 311
Lithium Battery 312
Sicherheitshinweise (German) 313