Extron electronics HD CTL 100 User manual

IMPORTANT:
Go to www.extron.com for the
complete user guide and installation
instructions before connecting the
product to the power source.
HD CTL 100 Workspace Controller • Setup Guide
Attaching a Logitech®SmartDock
This is a supplementary setup guide for how to properly set up the HD CTL 100 with the Logitech SmartDock.
The Extron HD CTL 100 is a compact workspace controller
designed for automatic display control in small meeting
rooms and huddle spaces. It features an HDMI pass-through
port that detects signal presence and can facilitate automatic
display power. When an active signal is connected to the
HDMI input from the Logitech SmartDock, the HD CTL 100
automatically turns on the display via CEC control. When
no signal is detected, the HD CTL 100 powers off the display
after a predetermined period.
For advance room automation and integration with optional
room occupancy sensors or control of display via RS-232
or infrared using the Conguration Program, reference the full
HD CTL 100 Workspace Controller Setup Guide, 68-3064-50,
available at www.extron.com.
NOTE: For more details about installation, conguration,
and operation, see the HD CTL 100 User Guide, available
at www.extron.com.
HD CTL 100 Panels
The front and rear panel connectors include:
POWER
12V
0.3A MAX
INPUT
OUTPUT
+V OUTDIGITAL I / O
HDMI/CECHDMI
G24
IR / S
SG
21G43G
AA BB CC DD EE FF
CONFIG
RSIGNAL
HD CTL 100
HH
II JJ
Rear Panel Front Panel
G
APower input connector EVoltage output connector HReset button
BHDMI input connector FIR/S control connector IUSB configuration port
CHDMI/CEC output connector GPower LED JSignal LED
DDigital I/O ports
Figure 1. HD CTL 100 Rear and Front Panels
Connecting the Logitech SmartDock to the HD CTL 100
1. Connect the supplied Logitech power supply to the SmartDock PWR connector (see figure 2).
Figure 2. SmartDock Rear Connections
2. If needed, the SmartDock offers the ability for external source devices to be presented on the presentation display. Connect
a source device, such as a laptop, to the HDMI IN connector of the SmartDock. If using a Logitech MeetUp camera, connect
the device to a USB port on the SmartDock.
1
RegionalSales
0
30
60
90
120
150 SOUTH
NORTH
EAST
WEST
logitech
Logitech
SmartDock
Laptop
(HDMI)
HD CTL 100
(HDMI & CEC)
logitech
Logitech
MeetUp
Example Logitech SmartDock Room Setup

HD CTL 100 with Logitech SmartDock • Setup Guide (Continued)
2
3. For a Single Display system, connect an HDMI cable from either of the SmartDock’s HDMI OUT connectors to the Input
connector on the HD CTL 100 (see figure 2 and figure 3).
POWER
12V
0.3A MAX
INPUT
OUTPUT
+V OUTDIGITAL I / O
HDMI/CECHDMI
G24
IR / S
SG
21G 43G
HD CTL 100
Workspace
Controller
HDMI
HDMI
Logitech SmartDock
Display
Laptop
HDMI/CEC
Logitech MeetUp
MODEL80
FLATPA NEL
USB
logitech
logitech
Figure 3. HD CTL 100 Cabling Diagram (Single Display)
4. For a Dual Display system, you will need a second HD CTL 100. Connect HDMI cables from both of the SmartDock’s HDMI
OUT connectors to the Input connectors of the two HD CTL 100s (see figure 2 and figure 4).
POWER
12V
0.3A MAX
INPUT
OUTPUT
+V OUTDIGITAL I / O
HDMI/CECHDMI
G24
IR / S
SG
21G 43G
HD CTL 100
HDMI
HDMI
Logitech SmartDock
DisplayDisplay
Laptop
HDMI/CEC
POWER
12V
0.3A MAX
INPUT
OUTPUT
+V OUTDIGITAL I / O
HDMI/CECHDMI
G24
IR / S
SG
21G 43G
HDMI
HDMI/CEC
HD CTL 100
Logitech
MeetUp
USB
logitech
MODEL80
FLATPANEL
MODEL80
FLATPA NEL
itech
itech
itech
logitech
logitec
ogitec
logitech
Figure 4. HD CTL 100 Cabling Diagram (Dual Display)
NOTE: Figure 3 and gure 4 above illustrate a cabling diagram showing the laptop (source device), the SmartDock, the
HD CTL 100(s), a Logitech MeetUp camera, and the display(s). The control of each display is via CEC. For displays that
have limited or no CEC control, use software to congure the HD CTL 100 to communicate to the display via IR or one-way
serial control.

SmartDock System Setup Configuration
1. With the SmartDock powered up, from the main presentation window, select the Gear icon (1) at the bottom right.
2. Select Settings (2). (Enter Admin credentials if needed.)
3. Select Windows Settings (3) from the menu on the left of the screen.
4. From the window to the right of that screen, select Go to Admin Sign-in (4).
3

© 2018 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92905, 800.633.9876
68-3064-51 Rev. A
11 18
HD CTL 100 with Logitech SmartDock • Setup Guide (Continued)
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide on the Extron website.
5. On the Windows login page, select the appropriate user account to sign in as administrator and enter Admin credentials.
Select the Right Arrow (5) when done.
6. From the Windows Start menu in the lower left corner, select Settings (6) from the list of applications.
7. Select System (7).
8. To ensure the system turns off the presentation display when not in use, select Power and sleep on the System menu. The
Screen times (8) have to be set for a specific value (something other than Never) using the drop-down list. The suggested
Screen time is 10 minutes for both battery and plugged-in power.
9. With motion detected from the motion sensor on the SmartDock, the video then outputs a signal to the HD CTL 100. The
HD CTL 100 sends a power command to the display, and the Main Skype Room screen is then displayed on the display
monitor.
NOTE: Plugging in a source device, such as a laptop, when the screen is in sleep mode, does not wake the SmartDock.
4