Extron electronics HFX 100 Tx User manual

HFX 100 Series • Setup Guide
The Extron HFX 100 Series consists of a transmitter (HFX 100 Tx) and receiver (HFX 100 Rx)
that use one multimode fiber optic cable to extend a HDMI signal up to 984 feet (300 m).
This guide provides basic instructions for an experienced installer to set up and operate the
HFX 100 Series extender (see the HFX 100 Series User Guide, at www.extron.com, for full
instructions).
Installation
Step 1 — Mounting
Mount the HFX 100 Tx close to the HDMI source and the HFX 100 Rx close to the HDMI display
device. See the HFX 100 Series User Guide for all mounting options. Follow the instructions
provided with the appropriate installation kit.
Step 2 — Cable Connections
HFX 100 Series Front Panel HFX 100 Tx Rear Panel HFX 100 Rx Rear Panel
Extron
Extron
POWER
12V
0.3 A MAX
OUTPUT
INPUT
HFX 100 Tx
POWER
12V
0.3 A MAX
OUTPUT
INPUT
HFX 100 Tx POWER
12V
0.2 A MAX
INPUT
OUTPUT
HFX 100 Rx
POWER
12V
0.2 A MAX
INPUT
OUTPUT
HFX 100 Rx
a
b
d
c
b
f
e
1. Connect one of the provided 12VDC power supplies to the front panel captive screw
connectors of the transimtter and the other to the receiver (b).
ATTENTION: Before connecting power to the HFX 100 Tx or Rx, see the attention
box in the “Power Supply” section of the HFX 100 Series User Guide for important
information about power supplies.
NOTES:
• When the units receive power but no input signals, the front panel LED (a) lights
amber.
• When the transmitter receives power and a HDMI input signal, the front panel LED
lights green
• When the receiver receives power and a ber optic input signal, the front panel LED
lights green.
All manuals and user guides at all-guides.com
all-guides.com

Extron Headquarters
+800.633.9876 Inside (USA/Canada Only)
Extron USA - West Extron USA - East
+1.714.491.1500 +1.919.850.1000
FAX:
+1.714.491.1517 +1.919.850.1001
Extron Europe
+800.3987.6673
(Inside Europe Only)
+31.33.453.4040
FAX:
+31.33.453.4050
Extron Asia
+65.6383.4400
FAX:
+65.6383.4664
Extron Japan
+81.3.3511.7655
FAX:
+81.3.3511.7656
Extron Middle East
+971.4.299.1800
FAX:
+971.4.299.1880
Extron China
+86.21.3760.1568
FAX:
+86.21.3760.1566
Extron India
1800.3070.3777
(Inside India Only)
+91.80.3055.3777
FAX:
+91.80.3055.3737
Extron Korea
+82.2.3444.1571
FAX: [phone]
© 2013 Extron Electronics All rights reserved. www.extron.com 68-2260-50 Rev A 04 13
HFX 100 Series • Setup Guide (Continued)
2. Connect the HFX 100 Tx output (d) to the HFX 100 Rx input (f) using one multimode
ber optic cable (not provided).
WARNING: Possible Damage to Eyesight. The HFX 100 Series extender outputs
continuous invisible light (Class 1 rated), which may be harmful and dangerous
to the eyes; use with caution. Do not look into the rear panel ber optic cable
connector or into the ber optic cable itself. Plug the attached dust cap into the
optical transceiver when the ber optic cable is unplugged.
3. Connect the HDMI display to the HDMI output connector of the HFX 100 Rx (e). Power on
the display.
4. Connect the HDMI source to the HDMI input connector of the HFX 100 Tx (c). Power on
the HDMI source.
Application Diagram
POWER
12V
- - A MAX
OUTPUT
INPUT
HFX 100 Tx
POWER
12V
- - A MAX
HFX 100 Rx
INPUT
OUTPUT
STANDBY/ON
PQLS HDMI OPEN/CLOSE FLOFF
USB
Extron
HFX 100 Tx
Transmitter
Extron
HFX 100 Rx
Receiver
Blu-ray Player
HDMI
HDMI
Flat Panel Display
Up to 300m ( 984 ft )
on Multimode Fiber
All manuals and user guides at all-guides.com