EZCast MagicLink User manual

Product information is subject to change without prior notice.
Rev 1.1
MagicLink Display Receiver
Quick Start Guide

Introduction
MagicLink provides a cost-effective and easy solution for connecting Windows & Mac
to hdmi display such as monitor, projector or TV, which is your preferred choice for
seamless gaming, video streaming or extending a workstation.
Plug your MagicLink to Wifi router USB port, so that it can turn into wireless connection
which supports network display standard including EZCast, DLNA, Google Home
Mirror and EZAir (compatible with iOS and macOS). Ongoing firmware upgrades are
provided to support latest operating systems.
HDMI
EZCast.com
MagicLink-12345678
AirPlay
Wire Connection
Wireless Connection
HDMI
EZCast

Your TV screen shall display the instructions once MagicLink is connected successful-
ly. Please follow the instructions to complete setup.
Set your TV’s source/input selection to HDMI port connected to the MagicLink cable.
Connect successfully
Install MagicLink
2
3
1
Hardware Installation of Wire Mode
23
Connect the USB port to laptop and plug MagicLink cable into a HDMI port on TV.
Select source
HDMI 1
HDMI 2
HDMI 3
PC
HDMI

Mirroring of Wire Mode
1. Download Windows/ Mac EZCast application on: http://192.168.203.1
2. Install the full version and launch the app, and EZCast shall connect to MagicLink
automatically. Click Mirror to start screen mirroring.
Note: If your MagicLink name isn’t shown on Searching Device, please click EZWire
to connect before mirroring.
Windows EZCast Full Version Windows EZCast Full Version
EZWire
MagicLink_xxxxxxxx
Mirroring
EZCast app
100% Fri 09:30 AM
Mirror Built-in Display
Use As Separate Display
Ｍirror/ Extend Screen for MacOS
Click icon on the top bar and select MagicEther_xxxxxxxx to mirror. Once your Mac
is mirroring, you could select “Use As Separate Display” to extend your screen.
1
2
ＭagicEther_12345678

Note: MagicLink supports routers only with specific standards. Please check the list
below: www.ezcast.com/support
Your TV screen shall display the instructions once MagicLink is connected successful-
ly. Please follow the instructions to complete setup.
Set your TV’s source/input selection to HDMI port connected to the MagicLink cable.
Connect successfully
Install MagicLink
2
3
1
23
Connect the USB port to router and plug MagicLink cable into a HDMI port on TV.
Select source
HDMI 1
HDMI 2
HDMI 3
PC
Hardware Installation of Wireless Mode
HDMI
Router

How to Mirror
MagicLink_XXXXXXXX
Screen
Mirroring
Screen Mirroring
Note:
Make sure that MagicLink and your device are both connected to same network.
EZAir for iOS
Screen mirroring may be done by EZAir on iOS smart devices. Swipe and click Screen
Mirroring, and choose MagicLink_xxxxxxxx.
Account
Mirror Device
Additional
CAST SCREEN/AUDIO
Cast to
MagicLink_xxxxxxxx
Google Home for Android
Note:
Make sure that MagicLink and your device are both connected to same network.
Please use 5GHz WiFi, instead of 2.4GHz, which provides higher speed connection
and better performance for Google Home mirroring.
You may download Google Home App from Google Play. Launch the Google Home App,
login with Google account. Then you may mirror to MagicLink using Google Home.
Steps: Account > Mirror Device > Cast Screen/Audio > Cast to > MagicLink_xxxxxxxx

Download EZCast app
Scan QRCode on TV screen or search
“EZCast” on Google Play/App Store.
Better Experience Using EZCast App
1
2
Search Device
Your Device
Scan QRCode to connect WiFi
MagicLink_XXXXXXXX
b
a
Note:
Make sure that MagicLink and your device are both connected to same network.
Connect to dongle
(a) Launch EZCast App and click Searching Device icon.
(b) Find and select your device name in the list to connect.

More to Do in EZCast App
For Android (5.0 above)
You can also mirror using EZCast app: just click the Mirror icon on the top bar.
Note: For EZCast/ Mirror, it only captures the screen without sound due to limitations
in Android. To mirror the sound to your TV, please use Chromecast Mirror instead.
While connecting to MagicLink, the functions of EZCast app, such as EZChannel
(supporting auto-play), web browsing, camera, photo, video, etc. can be mirrored to TV
screen automatically. For details of each functions, please see “Features of EZCast App”
in the following pages.
EZChannel Web Photo Camera Video Music Cloud Storage

Device Name:
Change device name of MagicLink.
Display:
Set display mode to game and video.
Resolution:
Change output resolution.
Language:
Change language preference.
EZAir Mode (only for iOS):
Switch mirroring mode of MagicLink
between “mirror only” and “mirror +
streaming” for iOS devices.
Auto play:
Automatically start video streaming
from Internet once your MagicLink
cable is connected to internet.
Upgrade:
Connect MagicLink to home router or
laptop in advance, and the latest
version of MagicLink firmware shall
be downloaded. Please do NOT turn
off the internet and the power (router/
laptop) of MagicLink during firmware
upgrading.
Reset to default:
Reset MagicLink to default settings.
EZChannel:
Create an EZCast account and bind with
MagicLink to enjoy the best experiences.
(1) Discover and personalize your video
channels.
(2) Search videos across different media
sites.
(3) Auto-play: Automatically start video
streaming from Internet once your
MagicLink dongle is connected to internet.
Video/ Photo/ Music: Stream and
playback local media files from devices to
MagicLink cable wirelessly.
Live Camera: Capture videos from local
camera to MagicLink cable.
DLNA: Stream multimedia files via DLNA
protocol.
Cloud Storage: Access data from Cloud
server (Dropbox, Google drive, or etc.).
Voice Control:
Pair MagicLink with any Google Home/
Assistant/ Amazon Echo Dot, and stream
entertainment just by asking. e.g. “Hey
Google, ask MagicLink to play holiday
video.”
User manual please refers to website as
below: https://www.ezcast.com/support
EZCast App Settings Features of EZCast App

Screen Mirroring
Download and install EZCast application
2
3
1
Setup for Laptop (Windows/ MacOS)
3 2
Click Mirror in EZCast application.
Download at https://www.ezcast.com/app.
(a) Make sure that MagicLink and your laptop are both connected to same network.
(b) Launch EZCast application, and click Searching Device to find and select your
MagicLink_xxxxxxxx.
Connect to dongle
Mirror Searching Device
MagicLink_xxxxxxxx
Device List
MagicLink-12345678

FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your
body
©2019 Actions Microelectronics Co., Ltd. All right reserved. EZCast are trademarks of
Actions Microelectronic Co., Ltd., registered in US, Europe, and other countries. Other
product and company names mentioned herein may be trademarks other respective
companies.

Product informations
Visit https://www.EZCast.com for more information.
Visit https://www.YouTube.com/EZCast for video tutorials.
Learn More
Power
Model
CPU
Memory
Interface
Display Output
MagicLink
AM8269D
DDR 128MB
USB
HDMI 1280x720
HDMI 1920x1080
DC 5V/1A through USB Port
Weight
USB to HDMI support
Color
Functions
(Connect to Router)
Windows 7/8/10 and above (EZCast App)
MacOS 10.10 and above (EZCast App or EZAir)
White
EZCast, EZAir(iOS screen mirroring), DLNA,
Google Home, voice control
iOS 9 and above
Android 5 and above
Windows 7/8/10 and above
MacOS 10.10 and above
35.6g