EZCast TwinX User manual

Product information is subject to change without prior notice.
Rev 1.0
EZCast TwinX Package
User Manual

1
2
1
Connect EZCast Compact to the HDMI port on TV and power on by
an independent 5V/1A adapter.
Plug EZCast Transmitter C-1 to Type C port on laptop or mobile.
Wait a few seconds until the flashing light on Transmitter C-1 stops,
and it will start mirroring automatically.
How to mirror
Install the receiver
1
Plug and play
2
Note: EZCast Transmitter C-1 support mirroring for all laptops
including Windows and MacOS, and Android mobiles
supporting DP output.
Press the button on Transmitter to stop mirroring or restart mirroring.
Stop and restart mirroring
3

Press the button on Transmitter to stop mirroring or restart mirroring.
Insert the pin to the reset hole for 2 seconds on EZCast wireless
display receiver. Release the button when the screen shows
“Release the button to pair with EZCast”. Please make sure your
receiver has been upgraded to the latest version.
Note: All EZCast wireless display receiver on our website supports
Transmitter pairing, except for Magic series products.
How to pair Transmitter with receiver
Turn on pairing mode for receiver
Note: There are 3 mode for reset button on receiver, depending
on pressing duration.
(1) Simple click: Switch the receiver to 2.4G/ 5G Hz Wi-Fi mode.
(2) Press for 2 seconds: Turn on pairing mode for Transmitter.
(3) Press for 10 seconds: Reset the receiver to default.
Plug Transmitter C-1 on laptop or mobile to provide power. Press
the button on Transmitter C-1 to complete pairing while the screen
shows “Ready to pair”.
Press the button on Transmitter C-1
2
Release the button to pair with EZCast
Ready to pair
2secs
1
2