Ezviz CST1C User manual

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”).
This user manual (hereinafter referred to as “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make
any warranties, guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version in the ™ website (http://www.ezvizlife.com).
Revision Record
New release – January, 2021
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of
EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the
properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED
“AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS,
OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF
THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE
PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR
PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE
TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN
AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C)
FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT
LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS,
AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE
ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND
DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO
ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL
NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE
PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE
LAW, THE LATTER PREVAILS.

Table of Contents
Overview..........................................................1
1. Package Contents.............................................................................1
2. Basics...............................................................................................1
Get the EZVIZ App.............................................2
Preparations.....................................................2
1. Detach Cover.....................................................................................2
2. Remove Insulation Strip....................................................................2
Add Device.......................................................3
1. Method One: Add by Scanning QR Code.............................................3
2. Method Two:Add by the Controller.......................................3
Installation.......................................................4
1. 1.8m Wall Mount...............................................................................4
2. 1m Wall Mount..................................................................................5

1
Overview
1. Package Contents
Open/Close Detector Shielding Cover
Regulatory Information Quick Start Guide
2. Basics
Detector Body
Cover
Base
Lens
With LED indicator inside
Installation
Instruction Mark
Shielding Cover
Name Description
LED Indicator
• Fast-flashing Blue: Detector enters device adding mode.
• Fast-flashing Blue 3 Times: Changing working mode.
• Blue for 1 second: PIR signal triggered/waken the device by
pressing the RESET button/tamper alarm triggered.
Shielding
Cover Fix it on the lens to limit detection range.

2
RESET Button
Name Description
RESET Button
Press and hold for about 5 seconds, the device will enter device
adding mode.
Double press to change working mode (the interval between the two
pressings should be less than 1 second).
• Factory Mode: Detect objects in every 10 seconds.
• Power Saving Mode: Detect objects in every 1 minute.
Get the EZVIZ App
1. Connect your mobile phone to Wi-Fi (suggested).
2. Download and install the EZVIZ app by searching for “EZVIZ” in the App Store
or Google PlayTM.
3. Launch the app and register an EZVIZ user account.
EZVIZ App
If you have already used the app, please make sure that it is the latest version. To nd
out if an update is available, go to the app store and search for "EZVIZ".
Preparations
1. Remove Cover
Remove the cover of the detector by turning the cover counterclockwise as
showninthegurebelow.
2. Remove Insulation Strip
Press and hold the battery, and then remove the battery insulation strip.

3
Insulation Strip
• After removing the insulation strip, before performing any operations, please wait
about 2-3 minutes, which will make the PIR detection performance more stable.
• When the battery level is low, the low battery notication will be pushed to the
EZVIZ app to remind you to replace batteries.
• If you need to replace batteries, please purchase CR2450 620mAh batteries.
• When replacing batteries, please insert with the positive side facing up.
Add Device
The detector should be used along with EZVIZ Smart Gateway (afterinafter referred to as
"gateway"). Please add gateway to the EZVIZ cloud, and then add the detector to the gateway
by the following two methods.
1. Method One: Add by Scanning QR Code
1. Log in to your account through EZVIZ app, tap the device adding icon and
then the QR code scanning interface will be displayed.
2. Scan the QR code on the inner side of the cover or on the user manual, and
then add the detector to the gateway.
Scan QR Code
3. Rotate the cover clockwise until the installation instruction mark and the
EZVIZ logo are aligned.
2. Method Two: Add by the Gateway
When adding detector by the gateway, place the detector as close to the gateway as
possible.
1. Make the gateway enter device adding mode as instructed by the user
manual of the gateway
2. Press and hold the RESET button for over 5 seconds until the indicator on the
detector turns fast-flashing blue, and then the detector will enter adding mode.
3. The detector will be added to the gateway automatically, and the LED
indicator will be off.
4. Rotate the cover clockwise until the installation instruction mark and the
EZVIZ logo are aligned.

4
Installation
The detector can be put on the table, or be sticked on where you want through the
double-sided tape at the bottom of the detector. The following installation positions
and angles are only for reference.
1. 1.8m Wall Mount
For better detection effect, please make the side with installation instruction mark
and EZVIZ logo faces the ground as shown in the gure below.
We all get
discovered!!!
6°
0°
123
1.8 m So are we!!!
Fig. 1 Side view of the detection range
• After you have installed the detector, you need to adjust the angle of the detector to
get appropriate detection range.
• The detection angle of the detector are 90° vertically and horizontally.
• The detector should be placed facing an area where people often walk across, and
there should be no obstacles in front of the detector.
• Do not install the detector at places with intense direct sunlight or places where
temperature changes greatly (near air conditions, refrigerators, electric fans, ovens,
windows, and more).
• Before sticking the dector, clean the surface rst. Do not stick the detector on
limewashed walls.

5
Detection Range
Fig. 2 Top view of the detection range
2.1m Wall Mount
(Prevent False Alarms Produced by Pets)
For better detection effect, please make the side with installation instruction mark
and EZVIZ logo faces the ground as shown in the gure below.
12
2
Not
detected~
Alarms
triggered!?
0°
Shielding
Cover
Fig. 1 Side view of the detection range
• The shielding cover will prevent part of the detector receving heat radiation emitted
by moving objects, thus limits detection range of the detector. This can prevent
false alarms especially produced by pets.
• If you have pets, the installation height=pet height+0.5m; if the pet height ≤ 0.5m,
the recommended installlation height is 1m.
• After using the shielding cover, the maximum detection distance of the detector is
5m.

6
Detection Range
Fig. 2 Top view of the detection range

Regulatory Information
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the Radio Equipment
Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment type [CS-A1S-32W (E2G),
CS-A1-32W, CS-A3, CS-T1C, CS-T2C, CS-T3C, CS-T9-A, CS-T4-A] is in compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the
battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info.
Use only power adapters listed in the Table.
Equipment model Adapter manufacture Adapter model
CS-A1-32W/
CS-T9-A/
CS-A3/
CS-A1S-32W (E2G)
ADS-5RE-06 05050EPCU/EPC(US), ADS-5RH-06 05050EPB(UK),
ADS-5RH-06 05050EPG(EU), ADS-5RH-06 05050EPSA(AU),
ADS-5RH-06 05050EPBR(BR), ADS-5RH-06 05050EPI(IN),
ADS-5MA-06A 05050GPK(KR)
Sichuan Jiuzhou Electronic Technology Co., Ltd DYS05100CP-U, DYS05100CP-E
Shenzhen Honor Electronic Co Ltd
Important Safety Information
Note: Please read the manual before using the device.
Direct current.
This symbol on the device indicates that the safety compatibility manual and / or installation manual must be read, which contains
information related to the safe operation of the device.
Caution: Be sure to read these instructions before operating the equipment.
Warning: If you want to disconnect the device from the power source, please unplug the DC power terminal that connects the
power adapter and device.
Warning: Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an
explosion.
Warning: Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the
leakage of flammable liquid or gas.
Warning: A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or
gas.
Warning: Dispose of used batteries according to the instructions.
Warning: Replace only with the same or equivalent type recommended by the manufacturer.
Caution: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY.
Warning: Do not ingest battery, Chemical Burn Hazard.
Caution: This product contains a coin/button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Caution: Keep new and used batteries away from children.
Caution: If the battery compartment does not close securely, stop using the product and keep it away from children.
Caution: If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical
attention.
Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.
Warning: For SELV DC input: the DC power source shall comply with the Safety Extra-Low Voltage (SELV) requirements of
IEC/EN 60950-1, IEC/EN 62368-1.
Warning: The power source should meet limited power source or PS2 requirements according to IEC/EN 60950-1 or IEC/EN
62368-1.
102030403, A
The power source should meet limited power source or PS2 requirements according

FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and
your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and
your body.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de
licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication
satisfaisante.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
IFETEL Information
La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicialy
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.