FALCON RIDGE KU-RTVX900-RW01 Installation manual

2515 Bypass Rd. Flemingsburg, KY 41041
606-845-7439
Instructions for Installation and Care of
Kubota RTV X900
Soft Rear Window
KU-RTVX900-RW01
Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable.
Be sure to read these instructions thoroughly before opening and installing the Kubota RTV X900 Soft Rear
Window. The installation is best done when the temperature is 70 degrees F. or warmer. The temperature
affects the adhesive Velcro, if conditions prevent installing in warmer weather it helps to store the adhesive
Velcro at room temperature prior to installation.
1. Carefully open the carton and remove the enclosure on a large flat surface that is clean and free of dirt.
2. Check over the parts included in the carton with the parts list shown below:
Adhesive Velcro Hook Strips: 15 each------------3”
“ “ ““2 each------------18”
“ “ ““1 each------------53”
Cab Enclosure 1 panels
If any parts are damaged or missing please contact customer service at [phone].
3. Begin by installing the Rear Window. Along the bottom of the rear window is a 53” long Velcro strip.
This will attach to the shelf under the expanded metal cage and along the top of the seat back. Take the
53” adhesive Velcro strip and adhere it up under the shelf with the Velcro facing down. Then attach the
bottom of the rear window making sure to center it and keep it straight. The photo below shows how it
should fit.

4. Now pull the rear window up and attach it to the top bar across the back of the roll cage. The top and
sides of the rear window has double-sided Velcro sewn along the edges. At each of these strips you will
place a 3” adhesive Velcro strip on the inside of the bar to hold the double-sided Velcro in place. The
diagram below shows how to place the Velcro.
5. The top of the rear window will attach to the bar as shown below:
6. Attach the sides of the rear window in the same fashion as shown in the photo below.

7. The Velcro strips down the sides of the Rear Window are not used unless you have the Falcon Ridge
Soft Door Kit. If you do not have the doors just ignore this strip. They will be there if you ever decide
to add the doors later.
Cleaning and Storage Recommendations:
1. Before removing the enclosure for storage, make sure it is clean and dry, to prevent soiling the textile
and scratching the clear vinyl windows. Clean with a soft rag or sponge using a mild liquid detergent
soap and warm water solution. Let the enclosure dry thoroughly before attempting to roll for storage.
2. It is important that the enclosure be rolled up for storage rather than folding. Folding will cause
undesirable creasing of both the enclosure textile and the clear vinyl windows. Carefully roll up the
enclosure similar to the way it was when it was packed at the factory. Put the rolled enclosure back into
the carton for storage at a normal room temperature. It is best not to expose the enclosure to either
extreme hot or cold temperatures when storing.
3. A special cleaner/conditioner is available from Falcon Ridge that will greatly increase the service life of
the cab enclosure. If needed, additional hook and loop sets are available, as well as other spare parts and
hardware. Contact Falcon Ridge for information.
Thank you for your purchase!

Return Policy
If for any reason you choose to return this product it must be returned within 30 days from date item is
received. You MUST package the product exactly as it was originally packaged from the factory to get a
full refund for the product!
The vinyl windows should never be folded when packaging in the box or for storage purposes. Lay all the
windows on top of each other with the canvas folded in between and the paper (if available) on both sides of the
windows.
All returned products will be inspected upon arrival at the production facility and must be in unused,
factory new condition to receive refund - a 25% restocking fee will apply.
If ordered from Falcon Ridge please call at 606-845-7439 to gain a return authorization number, use our
preferred shipping carrier (UPS) to return the item (unless the item is defective, you are responsible for paying
the shipping to return the item.) Any returns submitted to Falcon Ridge without a return authorization
number will be charged a 20% restocking fee. If ordered from one of Falcon Ridge’s many distributors’, you
must first call them and see what their return policy is. Once your item reaches our production facility, our
customer satisfaction team will inspect your item to ensure unused, factory new condition. NOTE: All
windshields must be returned with the original protective film intact and not removed. Do NOT
REMOVE if you have any intentions of returning the item. Refund/ replacement of a windshield will only
be processed on items with original protective film or if the windshield is defective.
Items must be properly packaged in the original shipping carton to protect them during transit and ensure your
returned item arrives back factory fresh, and in new resalable condition (any returned items that have been
used, altered or damaged in any way will not be subject for a refund.) All contents including instruction
manuals, accessories, hardware, Velcro, etc. must be included in your return shipment. Only items in OEM
factory new condition will be approved. Once returned items are received, credit will be issued to the original
credit card/ payment method used for the purchase. Outbound shipping and return shipping cost will not be
refunded. Please allow 4 to 6 weeks for your refund to be processed.
Warranty
To The Owner of this Product:
Thank you for purchasing one of Falcon Ridge Cab Enclosures, Tops &/or Windshields! Below are the terms
under which your product is covered under our manufacturer’s warranty.
30 Day Warranty which includes and is not limited to replacing the enclosure, tops and/or windshield due to
defect of the product. Please refer to the return policy in this case for more information.
1 Year Warranty includes any defect in material or workmanship within this time frame we will gladly correct
the problem or replace the enclosure, tops &/or windshield. Upon submitting for the correction or replacement
we will need to receive pictures of the defect in material or workmanship along with the receipt from the date of
purchase.