
54 6 7
1 2 3
SUPPORT
BUTTON MAPPING
SHIFTER CALIBRATION
TUNING OPTIONS
FR Support technique; DE Unterstützung; ES Soporte técnico; IT Supporto tecnico; PT Suporte técnico
FR Ajustement; DE Einstellung; ES Conguración; IT Regolazione; PT Conguração
FR Mappage des boutons; DE Tastenbelegung; ES Asignación de botones;
IT Mappatura dei pulsanti; PT Mapeamento de botões
FR Calibrage du levier de vitesse; DE Kalibrierung des Schalthebels;
ES Calibración de la palanca de cambios; IT Calibrazione del cambio; PT Calibragem de mudanças
I
H
G
F
EN Sold separately; FR Vendu séparément; DE Separat erhältlich; ES Se vende por separado;
IT Venduto separatamente; PT Vendido separadamente
*
*
3
6
4
5
1
2
Importers:
This device complies with part 15 of the FCC rules. The operation of this device is
subject to the following two conditions:
• This device may not cause harmful interference, and must accept any interference
received, including interference that may cause undesired operation.
• This device was not modied dierently than described explicitly in this user
manual.
NOTE: This device was tested and approved to the limitations for class B of digital
devices according to part 15 of the FCC rules. This limitation should ensure an
adequate protection against harmful interferences in residential areas. However, a
warranty for the non-recurring of interferences is not assumed.
Do not modify the device dierently than explicitly described in the product-related
user manual. Nevertheless, if you do modify the device dierently than explicitly
described in the product-related manual, you can be determined to stop the
operation of the device.
Fanatec®is a registered trademark of Endor AG
Designed and developed by Endor AG in Germany
Manufactured and distributed by
E.ON-Allee 3 - 84036 Landshut - Germany
EU: 00800 0 FANATEC or +49 (871) 9221 -122
US/CANADA: 011 800 0 FANATEC or +49 (871) 9221 -122
AUSTRALIA: 00800 0 FANATEC or +49 (871) 9221 -122
JAPAN: +81 306 7172 -719
Website: www.fanatec.com - www.endor.ag
Made in China
Imported and distributed by Endor America LLC
8200 Wilshire Blvd. Suite 200 - Beverly Hills CA 90211 - USA
Telephone: +1 321-655-3524
Website: www.fanatec.com - www.endor.ag
Endor Australia Pty Ltd
3 Staley Street,California Gully, Vic, 3556 - Australia
Telephone: 661 453 979 40
Website: www.fanatec.com - www.endor.ag
Endor Japan Kabushikigaisya
E5001 3-13-1, Harumi Cyuo-ku Tokyo-to
Tokyo 104-0053 - Japan
Telephone: 03-6717-2719
Website: www.fanatec.com - www.endor.ag
The product warranty is provided by Endor AG. Refer to the included warranty sheet as well as the terms & conditions of Endor AG on fanatec.com.
DE
FR
ES
IT
PT
EN
Dieses Produkt unterliegt der Garantie der Endor AG. Beachten Sie die beiliegenden Garantieblätter sowie die Allgemeinen Geschäftsbedingungen der Endor AG
auf fanatec.com.
Ce produit est sous la garantie d’Endor AG. Reportez-vous aux ches de garantie incluses ainsi qu’aux conditions générales d’Endor AG sur fanatec.com.
Este producto está bajo garantía de Endor AG. Consulte las hojas de garantía incluidas, así como los términos y condiciones de Endor AG en fanatec.com.
Questo prodotto è coperto dalla garanzia di Endor AG. Fare riferimento ai fogli di garanzia inclusi nonché ai termini e condizioni di Endor AG su fanatec.com.
Este produto está sob garantia da Endor AG. Consulte as folhas de garantia incluídas, bem como os termos e condições da Endor AG em fanatec.com.
Fanatec.com/support/faqFanatec.com/app
?
Fanatec.com/QR/CS-F-V2.5
MODES
FR Modes; DE Modi; ES Modos; IT Modalità; PT Modos
E
!
Fanatec.com/manuals
!Fanatec.com/
manuals
EN Wheel Base Dependent
FR Dépendant de la base du volant
DE Je nach Wheel Base
ES Dependiente de la Base del Volante
IT
Dipendente dalla base del volante
PT Depende da base do volante
*
EN Repeat
FR Réitérer
DE Wiederholen
ES Repetir
IT
Ripetere
PT Repetir
EN Enter
FR Entrer
DE Aufrufen
ES Entrar
IT
Entrare
PT Entrar
EN Exit
FR Sortie
DE Verlassen
ES Salir
IT
Uscire
PT Sair
Tuning Menu Tuning Menu
GEAR N
SET N -PRESS
LOW RIGHT BTN
# PC
PlayStation
®
1Up, Down, Left, Right, Press - 25
Rotate Left - 23 / Right - 24
Up, Down, Left, Right, Press - *GSB 1
Rotate Left - *GSB 2 / Right - *GSB 3
2
Joystick Joystick
26 (Press) *GSB 4
322 PS
49 SHARE / CREATE
510 OPTIONS
611 R3
7
27 (Rotate - CW) *GSB 5
21 (Rotate - CCW) *GSB 6
88 L2
912 L3
10 7 R2
11 34 (Up) / 32 (Down) *GSB 7 / *GSB 8
12 33 (Up) / 31 (Down) *GSB 9 / *GSB 10
13 2 Cross
14
36 (Rotate - CW) *GSB 11
35 (Rotate - CCW) *GSB 12
15 3 Circle
16 4 Triangle
17 1 Square
18 6 L1
19 5 R1
20 ENC: 37 / 38, MPS
Pulse / Constant: 37 - 48
*GSB 13 / 14
*GSB 13 - 24
21 ENC: 49 / 50, MPS
Pulse / Constant: 49 - 60
*GSB 25 / 26
*GSB 25 - 36
22 No output to game No output to game
* GSB = Game-Specic Button
Tuning Button
11
18
20
12
3 22
6
8
4
2
7
9
10
19
21
13
15
5
1
14
16
17
China RoHS 2 refers to the Ministry of Industry and Information Technology
Order No. 32, effective July 1, 2016, titled Management Methods for the
Restriction of the Use of Hazardous Substances in Electrical and Electronic
Products. To comply with China RoHS 2, we determined this product’s
Environmental Protection Use Period (EPUP) to be 10 years in accordance
with the Marking for the Restricted Use of Hazardous Substances in Electronic
and Electrical Products, SJT 11364-2014.
中国 RoHS 2 是指 2016 年 7 月 1 日起施行的工业和信息化部令第 32 号“电力电子产品限制使用有害
物质管理办法”。 为了符合中国 RoHS 2 的要求, 我们根据“电子电气产品有害物质限制使用标识”(SJT
11364-2014) 确定本产品的环保使用期 (EPUP) 为 10 年。
部件名称
Part Name
有害物质
Hazardous Substances
铅
(Pb)
汞
(Hg)
鎘
(Cd)
六价铬
(Cr6+)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
电缆线/电源
(Cable/Adaptor) OOOOOO
塑料
(Plastic) OOOOOO
金属部件
(Metal parts) XOOOOO
其它所有组件
(Other enclosure components) OOOOOO
电路板组件
(PCBA) OOOOOO
本表格依据 SJ/T 11364 的规定编制。
This table is prepared in accordance with the provisions of SJ/T 11364-2014
O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
O: Indicates that the hazardous substance contained in all of the homogeneous materials for this part is below
the limit requirement of GB/T 26572.
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
X: Indicates that the hazardous substance contained in at least one of the homogeneous materials used for
this part is above the limit requirement of GB/T 26572.