FANATEC CSL Elite Racing Wheel User manual

QuickGuide
EN
www.fanatec.com
“ ”, “ PlayStation ” and “ ” are registered trademarks of
Sony Interactive Entertainment Inc. All rights reserved.
All other trademarks are the property of their respective owners.
CONNECTIONS
In H-pattern mode or SQ mode Only in SQ mode
Use only the USB cable (F) with straight plug packaged with
the CSL Elite Racing Wheel to avoid damage to the USB port.
* also to PC.
PC compatibility not tested nor endorsed by Sony Interactive Entertainment Europe.
H-PATTERN SHIFTERS STATIC SHIFTER / SEQUENTIAL SHIFTER
PEDALS
HANDBRAKE
USB to PlayStation®4*
IMPORTANT!
CONTENTS
A
• CSL Elite Wheel Base (PS4™ version) (A)
• Table clamp (B)
• Table clamp screw with handle (C)
• Power supply unit (D)
• Power cord (regional) (E)
• USB connection cable (F)
• O-Ring (G)
• CSL Elite Steering Wheel (H)
• Allen key 5mm (I)
• Fixation screw M6 x 18mm (at head) (J)
• Racing style button caps for CSL Elite Steering Wheel (K)
• PS4™ button caps for (optional)
ClubSport steering wheels (L)
B C
H I JG
D
K
For detailed information please download the user manual
from www.fanatec.com/support. This is just a QuickGuide
and you will miss a lot of features if you don’t read the user
manual.
This product is under warranty of Endor AG, Seligenthaler
Straße 16a, 84034 Landshut, Germany,
Telephone: [phone], Fax: [phone],
Email: [email protected].
Refer to the chapter ‘warranty’ of the user manual as well as
the terms & conditions of Endor AG on
www.fanatec.com/terms-and-conditions.html.
MANUAL
When starting up the CSL Elite Racing Wheel for the rst
time please update the rmware, you can obtain it from
www.fanatec.com/downloads. Follow the instructions pro-
vided by user manual.
Compatibility with PlayStation®4 games on a case by case
basis. For a full list of compatible games, please visit
www.fanatec.com.
ATTENTION
L
To turn on the CSL Elite Racing Wheel, connect it to power
and press the “ ” button on the right side of the CSL Elite
Racing Wheel for about one second.
To turn off the CSL Elite Racing Wheel, press and hold the
“” button for 5 seconds.
ON AND OFF
NOTE: Only use the power supply (D) and power cord (E)
included with this product.
F
E

1
3
2
TUNING OPTIONS
To enter tuning menu press button . To navigate inside
the menu, use the directional stick:
• Press directional stick up or down to access 5 setups
• Press directional stick right or left to go through the op-
tions and press or hold it up or down to change option
values
SHIFTER CALIBRATION
To enter shifter calibration mode, simultaneously press the
two buttons +,highlighted below.
For the detailed process read shifter manual.
CENTRE CALIBRATION
If a centre calibration is needed (e. g. after rmware update of
wheel base) you need to enter the tuning menu by pressing
button as shown on the graphic “S_...” will appear on
the display. Now turn the wheel to its centre position and
press two buttons +at the same time to calibrate the
wheel centre.
S_...
1Press tuning button
2Turn the steering wheel to the
centre position
3Press the two buttons +
at the same time
DETACHING THE RIM
Slide CSL Steering Wheel (H) off
CSL Elite Wheel Base (A) axle.
Turn out the xing screw (J) and open
clamp ring mechanism.
Use only the Allen Key (I) which comes
with the CSL Elite Racing Wheel!
Turn the table clamp screw (C) into the bottom centre of the
CSL Elite Wheel Base (A).
Store xation screw (J) and Allen key (I) safely
for later use.
TABLE CLAMP
Insert the table clamp screw with handles (C) into the table
clamp (B).
1
1 1
2
3
2
3
4
5
6
2
Slide the CSL Elite Wheel Base (A) onto the table top until
the limiter blocks stop sliding at the edge of the table.
NOTE: Table clamp (B) has to be below table top.
3
Tighten the table clamp (B) by turning the table clamp screw
(C). Ensure that the table clamp’s feet remain well aligned
with the bottom of the table plate.
4
ATTACHING THE RIM
Align CSL Elite Wheel Base (A) axle
to correct position.
Slide CSL Elite Steering
Wheel (H) onto CSL Elite
Wheel Base (A) axle.
Use xation screw (J) and Allen key (I)
from box contents.
Push CSL Elite Steering Wheel (H)
until the screw hole matches with
hole on CSL Elite Wheel Base (A) axle
Turn the CSL Elite Steering Wheel (H) top side down to see
the bottom side of the clamp ring to follow next step below
Turn in xation screw (J) to x clamp
ring mechanism.
Use only the included Allen key (I).
IMPORTANT: Tighten only by using the
short lever of Allen key!
The CSL Elite Racing Wheel will start in “PlayStation®4 Mode”
by default when the CSL Elite Racing Wheel (H) is attached to
the CSL Elite Wheel Base (A). To switch to other modes press
the ‘Mode’ button once. The LED above the “ ” button will
indicate the current operation mode:
Blue indicates “PlayStation®4 mode”
Red indicates “PC mode”*
Purple indicates “ClubSport Wheel
Base V2 Compatibility Mode”
* PC compatibility not tested nor endorsed by
Sony Interactive Entertainment Europe.
MODES
Mode
LED
EXCHANGEABLE BUTTON CAPS
To detach the button caps, simply pull them out by hand.
They can be replaced with the included set of racing style
button caps for CSL Elite Steering Wheel (K).
Fanatec®is a registered trademark of Endor AG
Designed and developed by Endor AG in Germany
Manufactured by
Licensed for sale in Europe and Australia and for use exclusively with PlayStation®4.
Seligenthaler Straße 16 a - 84034 Landshut - Germany
Telephone: [phone] Fax: [phone]
Email: [email protected]
Website: www.fanatec.com - www.endor.ag