Fanimation FARGO FP3320 Series User manual

The FARGO™Fan
Set-Up and Maintenance Instructions Sheet
Figure 1
1. Carefully remove from
package.
Figure 2
ELECTRICAL REQUIREMENTS
Table fan requires a grounded electrical supply line of
120 volts AC, 60 Hz, 15 amp circuit. 8 ft power cord
included. NOT for Damp Location Use.
Set Up:
2. Plug directly into the
socket.
Figure 3
3. Select the desired airflow,
located on back of fan base by
rotating switch clockwise
Maintenance — To Clean Your Fan:
Periodic cleaning of your new fan is the only maintenance
that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.
CAUTION
Do not use water when cleaning your fan. It could
damage the motor or the finish and create the possibility
of electrical shock.
▲ WARNING
To Avoid Fire Or Electrical Shock, Do NOT Use This Fan
With Any Solid-State Speed Control Device And Do NOT
Use By Open Window.

10983 Bennett Parkway
Zionsville, IN 46077
[phone]
FAX [phone]
Outside U.S. call [phone]
Visit Our Website www.fanimation.comCopyright 2006 Fanimation 2006/12
Figure 1
1. Carefully remove screws
and top of cage.
Figure 2
2. Carefully remove nut and
blade. After cleaning and re-
installing the blade, carefully
install the nut, do NOT
overtighten.
Figure 3
3. Assemble the top cage with
the screws, do not overtighten.
Maintenance (cont’d) — To Clean Your Fan Blade:
Before discarding packaging materials, be certain all parts have been removed
How To Order Parts
When ordering repair parts, always
give the following information:
• Part Number
• Part Description
• Fan Model Number
Contact your retail store for repair parts.
Service Parts:
3
1
2
Fargo™Fan – Model #FP3320** (BG, BL, CL, CR, OB, or SN codes)
Ref # Description Part #
1 Cage Set Assembly w/Screws AP33211SER**
2 Blade AP33215**
3 Handle P33220**
** Insert Finish Codes (for service parts)
AB Antique Brass – Cage Set Assembly, Handle
BB Brushed Brass – Cage Set Assembly, Handle
BL Black – Cage Set Assembly, Handle
CH Chrome – Cage Set Assembly, Handle
OB Oil-Rubbed Bronze – Blade
SN Satin Nickel – Blade