Fantom Drives Black Diamond Instruction Manual

QuickStart
Installation Guide
Windows & Mac
Thank you for choosing Fantom Drives! Your Fantom Drives Black Diamond
external disk drive has been built to the highest standard of quality and
workmanship and, when used according to the instructions in this guide,
will provide years of trouble-free operation. We at Fantom Drives take
great pride in bringing personal satisfaction to each of our customers.
Your Fantom Drives' disk drive is compatible with all USB-capable Apple
Macintosh computers running Apple® Mac® OS 10.5 (or greater) and
PC-Compatible computers running Microsoft® Windows® XP, Vista,
Seven, and Windows Server® 2003/2008.
7-12-2011 BDU2M Rev A
The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation
of this document to assure its accuracy, Fantom Drives assumes no liability resulting from errors or omissions in this document, or from the use of the
information contained herein.
Fantom Drives reserves the right to make changes in the product design without reservation and without notification to its users.
Fantom Drives and the Fantom Drives Logo are registered trademarks of BNL Technologies, Inc. Macintosh, MacOS, and the MacOS logo are trademarks
of Apple Computer Inc. Microsoft Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other names and logos are
property of their respective owners.
Copyright © 1999, 2011 Fantom Drives. All rights reserved. This publication may not be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, in whole or in part, without the prior written consent of Fantom Drives, 20525 Manhattan Place, Torrance CA 90501.
WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
FCC Compliance Statements
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate
frequency energy and, if not installed and used in accordance with the instructions, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to equipment off and on, the user is encouraged to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna
• Increase the distance between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Fantom Drives
20525 Manhattan Place
Torrance, CA 90501
Sales: 310-320-7272
Support: http://www.Fantomdrives.com/help
www.Fantomdrives.com
By MicroNet

options, alterations, and attachments not under warranty prior to
returning the Product to Fantom Drives. Fantom Drives is not liable
for any loss or damage to these items.
This limited warranty does not cover: (1) any consumables (such as
batteries) supplied with this product; cosmetic damages; damage or
loss to any software programs, data or removable storage media;
or damage due to the Product such as but not limited to excessive
heat or humidity, or modifications of this Product; (2) improper
installation, operation, testing or maintenance of this Product;
(3) power failure or connection to improper voltage supply; or;
(4) attempted repair by any party other than Fantom Drives. This
Warranty does not apply when the malfunction results from the use
of this Product in conjunction with accessories, products or ancillary
or peripheral equipment, or where it is determined by Fantom
Drives that there is no fault with this Product itself.
This Limited Warranty is invalid if the factory applied serial number,
product identification, or tamperproof sticker have been altered or
removed from the Product.
Repair or replacement as provided under this warranty is the
exclusive remedy of the consumer. Fantom Drives shall not be
liable for any incidental or consequential damages for breach of
any express or implied warranty, breach of contract, negligence,
strict liability or any other legal theory related to this product.
Such damage include, but are not limited to, loss of profits, loss
of data, loss of use of the product or any associated equipment,
down time and purchaser’s time. Except to the extend prohibited
by applicable law, any implied warranty of merchantability or fitness
for a particular purpose on this product is limited in duration of this
warranty.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long on implied
warranty lasts, so the above limitation or exclusions may not apply
to you. This warranty gives you specific rights; you may have other
rights which vary from state to state.
17

16
One Year
Limited Warranty
Fantom Drives warrants this product (the “Product”) against defects in
material or workmanship as follows:
1. LABOR: For a period of one (1) year from the original date of
purchase from Fantom Drives or its authorized reseller, Fantom Drives
will repair defective Product (or, at its option, replace with a new or
recertified product) at no charge. After this 1 year period, you must pay
for all labor charges.
2. PARTS: For a period of one (1) year from the original date of purchase
from Fantom Drives or its authorized reseller, Fantom Drives will supply,
at no charge, new or rebuilt replacement parts in exchange for defective
parts of this Product. Any replacement parts will be warranted for
the remainder of the original warranty period or ninety (90) days from
installation by Fantom Drives. All exchanged parts replaced under this
warranty will become the property of Fantom Drives.
This warranty only covers the hardware components packaged with the
Product. This warranty does not cover any software contained in, or
included with, the Product; any such software is provided “AS IS”. Please
refer to any documentation included with the software for your rights
and obligations with respect to the software.
This warranty extends only to you, the original purchaser. It is not
transferable to any one who subsequently purchases the Product from you.
Proof of purchase in the form of a bill of sale (which is evidence that
the Product is within the warranty period) must be presented to obtain
warranty service.
To obtain warranty service you must take the Product, or deliver the
Product freight prepaid, in either it’s original packaging, or in a package
that provides the Product with a degree of protection equivalent to
that of the original packaging, to Fantom Drives. Items shipped with
insufficient packaging will void the item's warranty, and may be rejected
for service. Please contact Fantom Drives at the number listed on the
reverse side for further information.
Fantom Drives is not responsible for any damage to, or loss of, any
programs, data, or other information stored on any media or any part of
any Product serviced hereunder. Be sure to remove all features, parts,
Contents
Introduction ............................................................ 2
Parts & Accessories List ......................................... 2
System Requirements ............................................. 3
Precautions............................................................. 4
Fantom Drives Black Diamond at a Glance ................. 5
Connecting the drive to Your Computer ..................... 6
Formatting Your Fantom Drives External Hard drive ... 7
Formatting the drive in Mac OS X .............................. 7
Formatting the drive in Windows ............................... 8
Optimizing Windows Caching Algorithm .................... 9
How to safely dismount and turn off your
Fantom Drives External Hard drive ......................... 10
Troubleshooting /
Frequently Asked Questions (FAQ) ........................ 11
Glossary ............................................................... 14
Warranty Statement ............................................ 16
Contact Information .............................................. BC

2 15
Introduction
Welcome, and thank you for purchasing Black Diamond, the
external hard disk drive from Fantom Drives.
Parts &
Accessories List
The package should contain the following items:
• Fantom Drives Black Diamond
• USB 2.0 Cable
• AC Adapter
• Quick Start Installation Guide
If you are missing any items listed above, please fill out the
customer support form at:
http://www.fantomdrives.com/helpdesk
Please retain a copy of your receipt. You will need it if warranty
repair service is required in the future.
Data Stream - The flow of data between digital devices such as
computers and hard drives.
Driver - Software that enables the computer to communicate
with a peripheral.
Gigabyte - 1,024 Megabytes, or approximately one billion bytes.
The capacity of most hard drives is measured in Gigabytes.
Hardware - Physical components of a computer system
(computer, hard drives, printers, etc.)
Hub - A device which links peripherals together onto the same
bus.
Interface - Junction between two items of hardware or software
for the exchange of data.
Mb (Megabit) - One million bits.
Mbps (Megabits per second) - A data transmission speed of
one million bits per second. Data transmissions are typically
measured in bits (kilobits, megabits etc) per second.
MB (Megabyte) - 1,048,576 bytes.
Operating System (OS) - Software that controls the assignment
and use of hardware and application software resources.
Peripheral - A generic term for hard drives, printers, scanners
and other discreet devices that add functionality to a computer.
Port - A connection which enables compatible peripherals to
send and receive data.
Software - A set of instructions that enable the computer to perform
pre-programmed functions in the order specified by the user.
Storage - Any equipment which stores data, such as hard
drives, CDs, and DVDs.

14 3
Q: I do not see my drive listed in the My Computer window,
but it does appear in the Device Manager list.
A: Right-click on My Computer. Select Manage in the pop-up
menu. In the Computer Management window and navigate to
Storage -> Disk Management. In the Disk Management window,
you should see a list of available storage devices. Look for the
disk that has a capacity closest to your Fantom Drives unit,
and right-click on the corrolating right-hand box. In the pop-up
menu that appears select "Delete Partition." The description will
change to say “Online" & "Unallocated”. Right-click on the box
and select Create New Partition in the pop-up menu. When the
Partition Wizard appears, select "Primary Partition" and click
"Next." Click "Next" in the next dialog, selecting the default value
for the drive. You will then see a drive letter (you can change
this drive letter if you wish); click "Next." You will then be asked
to format the drive.
Q: After I connected the drive to my PC, I got the following
alert message: HI-SPEED USB Device Plugged into non-HI-
SPEED USB Hub.” What does this mean?
A: Windows 2000 and XP users will get this alert message if you
plugged the drive into a USB port that only supports USB 1.1.
This is fine, except your drive will operate at USB 1.1 speeds.
If an issue cannot be resolved by using our FAQ, please
contact Technical Support via the Fantom Drives support site
at http://www.Fantomdrives.com/helpdesk
Glossary
Bit - The smallest unit of digital data. In binary code, a bit is
represented logically as a either 1 or a 0.
Buffer - RAM cache that temporarily stores data so it can be
delivered to a device as it is needed.
Bus - An electronic link for the transmission of data between
digital devices, such as computers and computer peripherals.
Byte - A unit of digital data, usually made up of eight bits.
System Requirements
System Requirements for Mac
• G5 or Intel based Apple Macintosh Computer
• Mac OS X 10.5 or newer
• An Available USB port
System Requirement for PC
• Pentium 4-based PC, 1.8GHz or faster CPU
• Microsoft® Windows® XP SP3*, Vista, Seven
• Microsoft® Windows Server® 2003, 2008
• Available USB port
*Windows XP supports up to 2TB volumes. Larger models will
not work correctly with this platform.
USB 2.0 compatibility with USB 1.x
USB 2.0 ports are backward compatible with USB 1.x.
However, if you connect the drive to an older USB port, it will
operate at lower USB port speed.

4 13
Precautions
Failure to follow the precautions described below may cause
damage to your Fantom Drives External Hard drive and void the
warranty.
• DO NOT open the case. Doing so will void the warranty.
• DO NOT use a third-party AC adapter or power cord. Doing so
may damage the drive and void the warranty.
• DO NOT bump, jar or drop the drive as this may damage it and/
or result in loss of data.
• DO NOT disconnect any cables while the drive is powered on
without first properly dismounting the device via your operating
system; doing so can result in data loss and possible damage.
• DO NOT set any liquids or beverages on the drive as they may
damage the internal electronics.
• Fantom Drives highly recommends that you regularly back-up the
files stored on your Fantom Drives external hard drive.
Fantom Drives is not responsible for any data loss, nor will
Fantom Drives perform any recovery of lost data or files.
FAQs for PC Users:
Q: My computer does not recognize the drive.
A: Make sure all of your connections are secure. If you have an
add-on card, make sure it is working properly and/or update the
driver. Also, make sure you have all the latest updates for your
Windows installation
Q: Does the drive work with Norton Ghost?
A: Yes. Norton Ghost 2003 or newer support USB drives.
Fantom Drives does not provide any additional drivers.
Q: I formatted my hard disk under Windows XP, but my Vista
machine does not allow me to delete or modify files on the drive.
A: Windows Vista and XP handle file permissions differently. In
Windows XP the default user group has full permissions to every
volume, whereas in Vista they do not. To fix this condition, you
need to grant the users group modify privileges to the drive:
1. Right-click the drive letter in Explorer and select properties
2. Click the security tab
3. Click "Edit." You will be asked to enter your administrator password.
4. Select "Users" and check the Modify box
5. Click OK.
Q: Where are the drivers for my operating system?
A: Windows 2000 and newer already include all the necessary
drivers. There are no drivers available for Windows NT or 98.
Q: When I leave my computer idle for a while, my drive won’t
work properly.
A: The most likely cause is that your computer is going into
sleep mode. The immediate solution is to shut down your computer
and turn off the drive, and then restart your computer. Once your
computer is completely booted up, turn on the drive. You should
see the drive in the Windows Explorer. To prevent this problem
from recurring, open the “Power Settings/Energy Saver” and set
it to never go into sleep mode.

12 5
Q: Can I leave my Black Diamond on all the time, or should I
turn it off when not in use?
A: The Black Diamond is meant to be left on, but does not add
any limitations on being turned off. Drive reliability is affected by
repeated power cycles, and the Black Diamond cannot alleviate
this. In addition, Micronet recommends that the drive’s power
supply is connected through a UPS or surge protector; In the
case of a power surge, or brown/black out, the hard drive’s
sensitive electrical components will not be damaged.
FAQs for Mac Users:
Q: Why is my drive asking me to format it? It was already
formatted and it contains data.
A1:Run a disk repair utility on the drive.
A2:Perform permission repair on your system drive. Open the
disk utility (located in /Applications/Utilities/Disk Utility.app.)
Select your system drive (usually the first disk listed) and click
"Repair Disk Permissions" in the "First Aid" Tab.
A3:Restart your computer. As soon as the bootup chime
sounds, press and hold down the option-command-p-r key
combination to reset the PRAM. Release the keys when
the chime sounds a second time. Please refer to your Mac
manual for more information on these procedures
Q: My computer does not recognize the drive.
A: Check to make sure that all of your connections are secure
and that the power switch is in the "ON" position. Then check if
your External Hard drive is listed in the Apple System Profiler. If the
problem persists, verify that the appropriate port used is functioning.
Q: I'm trying to copy files to/from FAT32 volumes or network
shares, and it keeps failing.
A: FAT32, HFS+, and other file system formats allow different
standards of filename length or use of special characters.
Rename the offending file(s) and try the operation again.
Q: I have a FAT32 disk, and when I try to copy a large file I
get an error saying there is not enough room on the drive-- I
have lots of free space!
A: FAT32 only allows files up to 4GB in size. To copy larger files,
please reformat the volume using MacOS Extended Format.
Fantom Drives Black
Diamond Hard Disk
at a Glance
AC Adapter Port
USB 2.0 port
Disk Activity/Power
Indicator Light
Power Switch

6 11
Troubleshooting/
Frequently Asked
Questions (FAQs)
General Questions
Q: I bought a 500GB drive, but my computer is showing
465GB. Where is the missing capacity?
A: Hard drive manufacturers market drives in terms of decimal
(base 10) capacity. In decimal notation, one megabyte (MB) is
equal to 1,000,000 bytes, and one Gigabyte (GB) is equal to
1,000,000,000 bytes. Many operating systems use the binary
(base 2) numbering system to describe disk capacity; In the
binary numbering system, one megabyte is equal to 1,048,576
bytes, and one gigabyte is equal to 1,073,741,824 bytes.
Simply put, decimal and binary translates to the same amount
of storage capacity.
Q: Is my external hard drive bootable?
A: Yes! As long as your host hardware and operating
system support booting from USB. Refer to your computer’s
documentation for more information
Q: My drive was working fine yesterday but now its gone!
A: The disk may have been shut down without being dismounted,
or may have failed. If you do not hear and feel the drive spin up
when you connect the power, the drive will need to be replaced.
If you verify that the computer input and the drive data cable are
working, you may be able to repair or recover the data with your
computer’s disk repair utility or a third party utility.
If your disk repair utility cannot repair or see the disk, the
drive has failed and will need to be replaced. If data recovery
is desired, please contact an established professional data
recovery firm. For a checklist of what qualities you might seek,
see www.drivesavers.com/why_drivesavers/index.html or www.
ontrack.com/services.
Connecting the drive
to Your Computer
1. Plug the AC adapter cord into the power port on the back of
the drive. The plug should not require much effort to insert. If
the plug will not go in, do not force it; the plug is probably upside
down. Rotate the plug and try again. Incorrectly inserting the
plug could damage the drive and void the warranty.
2. Plug the power cord into the cord socket in the AC adapter.
Plug the other end into an AC outlet.
3. Connect the appropriate cable to your host:
USB plugs are shaped so they can only be properly
inserted one way. Be sure to insert the plugs
properly or you may damage the drive and void
the warranty.
Connect the square USB connector (type B) of
the included USB cable to the square USB plug
on the Black Diamond and the rectangular end to
a free USB port on your computer.
4. Flip the power switch located on the back of
the Black Diamond to the "ON" position (labelled
"-".) Once the drive is powered up, your computer
should recognize it and the drive will be ready to
format.

10 7
How to Safely
Dismount and Turn Off
Your Disk Drive
When a device such as a hard drive is mounted, that means the
computer ‘sees’ the device and is able to communicate with it.
When you dismount a device, the computer no longer sees it.
The device may still be running but the computer cannot access
it, as though the device no longer exists.
Never turn off or unplug a hard drive without dismounting it first.
Doing so could cause data on the drive to be lost or damaged.
How to safely dismount and turn off the
drive with the computer running
Mac Users
Drag the icon for the External Hard drive to the Trash. The drive will
dismount and you can then safely turn if off. You may then unplug the
power cord and data cable if you want to disconnect the drive.
PC Users
1. Locate the System Tray. The System Tray includes the time
display in the bottom right, and icons to the left of the time. One
of the icons will be an hot plug icon ( ).
2. Left-click on ( ). You will receive the alert message “Safely
Remove..” followed by the drive description and drive letter for
the device.
3. Left-click on the appropriate device (with the drive letter
matching the one used by the External Hard drive). After a few
seconds, Windows will give you a message that it is safe to
remove the device.
Formatting Your Drive
The Black Diamond comes preformatted at the factory with the
NTFS file system, the native file system for Windows . Linux and
MacOSX hosts require a third-party driver such as NTFS-3G to
achieve full read/write capability with NTFS volumes. If you intend to
use this drive exclusively on MacOSX it is advised to reformat your
disk with the HFS ("Mac Extended") file system.
Formatting a hard drive erases all data contained on it. Please
be sure to create a copy of the files you wish to keep to another
location before reformatting.
Formatting the drive in Mac OS X
1. Launch the “Disk Utility” application located in Applications/Utilities.
2. Highlight your new drive and select the “Partition” tab
3. Select the new partition map type.
4. For each partition in the volume scheme, select the desired
file system format and volume name (optional)
Although it is possible to format using the DOS file system, we
do not recommend this as an artificial capacity limit may be
imposed on the drive and performance will be unpredictable.
5. Click the “Options” button. Select “Apple Partition Map” in the
dialog box and click “OK”.
6. Click “Apply.” Your Fantom Drives Black Diamond is ready to
use!
2
3
34
6
5

Formatting the drive in
Windows Hosts
1. Open the disk management console. A list of the attached drives
and their respective volumes will appear. Select the Black Diamond
Disk.
The Disk Management Console can be accessed by right-
clicking on the "My Computer" icon ( ) and selecting
"Manage" from the drop down menu. Disk Management
is found under "Storage" in the resultant window. For an
illustrated guide, please see
http://www.fantomdrives.com/helpdesk/faq.php
2. Right-click on the drive letter and select Format in the pop-up
menu. The Format dialog box will appear.
If the hard disk is not signed for use, the New Partition option
is unavailable (superimposed
no-entry icon). In this case a
signature can be written on the
hard drive by right clicking on
the disk description window and
selecting "Initialize Disk".
3. Under Capacity, verify the drive capacity. It should be close to
the stated capacity of your drive in gigabytes.
4. In the File System pop-up menu, select NTFS. The default
formatting option is full format. A full format will fully verify the
disk media. A Quick format is quick, but will do less verifying of
the drive than a full format. Click Start. Once the format process
is complete, your external hard drive is ready to use.
5. In Windows XP and Vista, it is possible to optimize the drive
for performance or quick removal. To select your desired mode,
open the device manager (located in \Windows\System32\
devmgmt.msc on your system drive.) Right-click Fantom Disk in
Disk drives, and select properties. Select the Policies Tab near
the top left of the window, and click your desired optimization
level. Press OK when finished, and you may close the disk
management applet.
8 9
Optimizing Windows Caching Algorithm
By default, Windows Vista/7 optimize disk caching for quick
removal. This is done to assure data integrity in case of
disconnection, but as a result the drive will appear to be slower
then on older/different operating systems. To change Windows'
caching algorithm, open the disk management console (as
described on page 8) on your system drive. A list of the attached
drives and their respective
volumes will appear.
Right-click on the Fantom
external disk in the disk
list and select properties.
Select the Policies Tab
near the top left of the
window, and click your
desired optimization level.
press OK when finished,
and you may close the
disk management applet.
Optimizing for performance can greatly enhance the
throughput of your disk but is much more vulnerable to
data loss! Make sure to have appropriate backup strategies
before enabling this feature!