Fantom Drives MTT160 Instruction Manual

QuickStart
Installation Guide
For Fantom Drives Single Button Backup
Portable Hard Drives
Windows & Mac
Thank you for choosing Fantom Drives! Your Fantom Drives disk
drive has been built to the highest standard of quality and workman-
ship and, when used according to the instructions in this guide, will
provide years of trouble-free operation. We at Fantom Drives take
great pride in bringing personal satisfaction to each of our custom-
ers.
Your drive is compatible with all FireWire or USB-capable Apple
Macintosh computers running MacOS 10.2* (or greater) and PC-
Compatible computers running Windows 98SE, Millennium Edition,
Windows 2000, Windows XP, and Windows 2003.
*One button backup feature not compatible with Macintosh

2
Contents
Introduction ............................................................ 3
FireWire and USB 2.0 Compared ............................. 4
Parts & Accessories List ......................................... 5
System Requirements ............................................. 6
Precautions ............................................................ 7
Fantom Drives External Hard Drive at a Glance .......... 8
Connecting the Drive to Your Computer ..................... 9
Installing the USB 2.0 Driver (Windows 98SE/ME) .. 10
Formatting Your Fantom Drives External Hard Drive . 11
Formatting the Drive in Mac OS 10 ......................... 11
Formatting the Drive in Windows 98/ME ................. 12
Formatting the Drive in Windows 2000/XP ............... 13
Installing the One Button Backup Software .............. 14
How to safely dismount and turn off your
Fantom Drives External Hard Drive ......................... 15
Performing Basic Tasks ......................................... 17
Troubleshooting /
Frequently Asked Questions (FAQ) ........................ 18
Glossary ............................................................... 21
One Year Limited Warranty .................................. 23
Contact Information .............................................. BC

3
Introduction
Welcome, and thank you for purchasing an Fantom Drives External
Hard Drive. The information in this QuickStart Guide pertains to the
following models:
• USB 2.0 External Mini Hard Drives
• USB 2.0 & FireWire Combo External Mini Hard Drives
In photos and illustrations in this guide, Combo Drives are shown.
(Except for the addition of FireWire ports and logos on Combo Drives,
Fantom Drives USB 2.0 and Combo Drives are visually identical.)
The following alert symbols are used in this guide:
This signifies impor-
tant information for
ALL users.
This signifies impor-
tant information for
USB 2.0 users.
This signifies impor-
tant information for
FireWire users.
USB 2.0 compatibility with USB 1.x
USB 2.0 is backward compatible with USB 1.x. However, if you
connect the Drive to a USB 1.x port, it will operate at USB 1.x
speeds.
Combo Drive Users
You have the choice of using either the USB 2.0 or a FireWire
connection. You cannot connect the USB 2.0 and FireWire
connections simultaneously; You must select one interface or the
other. If you have both USB 2.0 and FireWire connections available
with your computer system, you may be wondering which interface
to use. To help you decide, see “FireWire and USB 2.0 Compared”
on the next page.

4
Data transfer rate of 400 Mbps
FireWire is suitable for applications
where delayed or out-of-order data
frames are unacceptable, such as digi-
tal video editing.
Supports up to 63 devices
FireWire devices can be linked in a
daisy-chain configuration. With the use
of FireWire hubs, up to 63 devices can
be linked on a single FireWire bus.
Peer-to-peer architecture
FireWire devices are intelligent. Data
transmission can take place without the
need for input from the computer.
Cable length up to 14ft
On-bus power up to 45 W
FireWire can power larger, higher
power consumption devices than USB
2.0.
Plug & Play
You do not need to install drivers,
assign unique ID numbers, or connect
terminators.
Hot-swappable
Devices can be added and removed
while the computer is running. Also,
you can turn off the device when not
needed, in order to conserve electricity.
Data transfer rates up to 480 Mbps
With USB, data transfer rates can
vary depending on a number of factors,
including available CPU resources.
Supports up to 127 devices
Connecting more than one or two USB
devices to a computer typically requires
the use of one or more hubs: each hub
can accommodate several USB devices.
Master-slave architecture
The computer dictates data flow to,
from, and between attached devices.
Cable length up to 16.5ft
On-bus power up to 2.5 W
Suitable for low-power-consumption
devices such as flash card readers.
Plug & Play
You do not need to assign unique ID
numbers, or connect terminators. On
most operating system you do not need
to install drivers.
Hot-swappable
Devices can be added and removed
while the computer is running. Also,
you can turn off the device when not
needed, in order to conserve electricity.
FireWire & USB 2.0
Compared

5
Parts &
Accessories List
The package should contain the following items:
• Fantom Drives External Hard Drive
• USB with power passthrough cable
• FireWire cable
(supplied with Combo Drives only)
• USB 2.0 Installation CD
(required for Windows 98SE and ME only)
• Quick Start Installation Guide
• Warranty Registration Card
• If you are missing any items listed above, please fill out
the customer support form at:
http://www.FantomDrives.com/help
• Please retain a copy of your receipt. You will need it if warranty
repair service is required in the future.

6
System Requirements
System Requirement for PC
• Pentium-based PC with 233 MHz or faster CPU
• Windows 98SE, ME, 2000, or XP
• 32 MB RAM
• Available USB port (for USB 2.0 Drives)
• Available USB port or FireWire port (for Combo Drives)
Windows XP users:
In order to use the USB 2.0 connection, you must have
at least Service Pack 1 for Windows XP.
System Requirements for Mac
• Power Macintosh
(G5, G4, Blue & White G3, iBook or iMac)
• Mac OS X 10.2 or newer
• Available USB port (for USB 2.0 Drives)
• Available USB port or FireWire port (for Combo Drives)

7
Precautions
Failure to follow the precautions described below may cause damage
to your Fantom Drives External Hard Drive and void the warranty.
• DO NOT open the case. Doing so will void the warranty.
• DO NOT use a third-party AC adapter or power cord. Doing so may
damage the Drive and void the warranty.
• DO NOT bump, jar or drop the drive as this may damage it and/or
result in loss of data.
• DO NOT disconnect any cables while the Drive is powered on without
first properly dismounting the device via your operating system; doing
so can result in data loss and possible damage.
• DO NOT set any liquids or beverages on the drive as they may
damage the internal electronics.
• Fantom Drives highly recommends that you regularly back-up the files
stored on your Fantom Drives External Hard Drive. Fantom Drives is
not responsible for any data loss, nor will Fantom Drives perform any
recovery on lost data or files.

8
Fantom Drives
External Hard Drive
at a Glance
Data/Power
indicator light
• Lights blue when the Drive
is powered on
• Flashes red when the Drive
is reading or writing data
AC adapter port*
USB port
Backup Button
USB signal/power cable
*titanium mini requires 500mA of power to operate. 6
pin IEEE1394 FireWire host busses, powered USB ports,
and powered USB hubs should supply sufficient power
to operate. Underpowered USB host busses as well as
IEEE1394-2000 4 pin FireWire connections may require
an external power supply (optional)
Power Passthrough
Connector
Data Connector
Drive Connector

9
Connecting the Drive
to Your Computer
Connect the USB power passthrough connector to a
free USB port, followed by the USB Signal connector of
the included USB cable to another free USB ports on
your PC or USB hub (See USB cable picture on page 7.)
Connecting both USB connectors is required to provide
sufficient power for the drive to operate. Do NOT Plug the Signal
connector into the Power Passthrough connector.
Connect the Firewire cable to your computer's FireWire
port. FireWire plugs are shaped so they can only
be properly inserted one way. Be sure to insert the
plugs properly or you may damage the Drive and void
the warranty. The Drive has two FireWire ports for
connecting another FireWire device in a daisy chain. You can use
either port to connect the Drive to your computer.
The Drive should power up and be ready for use automatically. If
the LED blinks and drive does not mount on the host operating
system, your host bus may not be providing sufficient power for the
drive. Please make sure both signal and power USB connectors are
attached (USB) or your FireWire host connection is powered. While
most 6 pin IEEE1394 FireWire host busses, powered USB ports,
and powered USB hubs should supply sufficient power to operate,
Underpowered USB host busses as well as IEEE1394-2000 4
pin FireWire connections may require an external power supply
(optional)

10
Installing
the USB driver
(For Windows 98SE and ME* only)
Windows 98SE and ME may require an additional driver for USB
operation. The driver is located on the included CD, or on our web
site at www.Fantom Drives.com/help. Once the driver archive is
downloaded, please uncompress it to a local directory and note the
location.
*Windows ME users:
If you have upgraded your Windows ME OS with all of
the latest available updates from Microsoft, you will not
need to install the USB Driver.
1. After the Drive has been properly connected, the Add New
Hardware Wizard should appear with the message: “Found New
Hardware --> USB 2.0 Storage Adapter.” Click Next.
2. You will then see the message: “What do you want Windows to
do?” with two options. Select “Search for the best driver for your
device (Recommended).” Click Next.
3. In the next window that appears, select "choose location" and
navigate to the directory you unpacked the driver files into. Click
Next.
4. You will then see the message: “Windows is now ready to install
the best driver for this device…” Click Next.
5. Once the software installation is complete, you will see the
message “Windows has finished installing the software that your new
hardware device requires.” Click Finish and then eject the CD. You
should now see a new icon (a gray box with a green arrow) next to
the time display on your System Tray. Please reboot if prompted by
the Operating System.
Additional Compatibility information is available from
Microsoft at http://support.microsoft.com/kb/263218

11
Formatting
your Disk Drive
The Titanium Mini Disk Drive comes preformatted at the factory with
the FAT32 file system. We provide formatting instructions in the
event that you need to reformat your Drive, or if you want to format
your Drive with a file system other than FAT32.
Formatting a hard drive erases all data contained on the
drive. If you wish to reformat your Fantom Drives External
Hard Drive, be sure to create a copy of the files you wish
to keep before reformatting.
Formatting the Drive in Mac OS X
1. Launch the Disk Utility application (Disk Utility is located in the
Utilities folder, inside the Applications folder). The Disk Utility window
will open with a small sub-window at left and a larger sub-window
with a series of tabs at the top.
2. You should see the Drive listed in the left sub-window. Click on the
drive to highlight it. Information about the Drive will appear in the
Information sub-window.
3. Click on the Erase tab. In the Erase sub-window you will see a
Volume Format pop-up menu and a Name field.
4. In the Volume Format pop-up, select the format type.
Although it is possible to format a hard drive on Mac OS X
using the DOS file system, we do not recommend this, as
an artificial capacity limit may be imposed on the drive and
performance will be unpredictable.
5. Click Erase. You should see an alert pop up with the message:
“Erasing a disk will destroy all information on all of the volumes of the
disk…” Click Erase. Once initializing is complete, you should see the
drive listed in the left sub-window of the Disk Utility screen. Quit Disk
Utility. You should now see the Drive icon on the Desktop.

12
Formatting the Drive in
Windows 98SE/ME
1. Double-click on the My Computer icon. In the My Computer
window you should see an icon and drive letter for the External Hard
Drive. (If you are not sure which icon represents the External Hard
Drive, turn off the Drive and see which icon disappears. Then turn
the Drive back on and wait for the icon to reappear.)
2. Right-click on the drive letter and select Format. In the Format
window, verify the Drive’s capacity; it should be close to the stated
capacity of your Drive in megabytes.
3. Under Format type, Select Full; everything else should be left at
the default setting. In the Label field under Other options you may
assign a name to the External Hard Drive. (The name you assign is
limited to 8 characters and no symbols are allowed.)
4. Click Start. The following warning message will appear: “This
device is either a hard disk or a large removable disk. Formatting it
will destroy all files currently on the drive. Are you sure you want to
format this drive?” If no data was previously written to the Drive or
you already backed up the data you wish to keep, click OK.
5. If you see a warning message from an antivirus program, click
Exclude.
6. When formatting is complete, you will be asked to run a thorough
Scandisk. Periodically running Scandisk is a part of regular hard
drive maintenance. If you do not wish to run Scandisk at this time,
close the format window.

13
Formatting the Drive in
Windows 2000/XP/2003
1. Open the disk management console. A list of the attached drives
and their respective volumes will appear. Select the GForce Disk.
The Disk Management Console can be found under
\Windows\System32\diskmgmt.msc on your system drive.
For an illustrated guide, please see
http://www.fantomdrives.com/support/faqs
2. Right-click on the drive letter and select Format in the pop-up
menu. The Format dialog box will appear.
3. Under Capacity, verify the Drive capacity. It should be close to the
stated capacity of your Drive in gigabytes.
4. In the File System pop-up menu, select NTFS. The default
formatting option is Full format. A Full format will take about 30-90
minutes. A Quick format will take just a few minutes, but will do less
verifying of the Drive than a Full format. Click Start. Once the format
process is complete, your External Hard Drive is ready to use.
5. In Windows XP, it is possible to optimize the drive for performance
or quick removal. To select your desired mode, open the device
manager (located in \Windows\System32\devmgmt.msc on your
system drive.) right-click Fantom GFMD in Disk Drives, and select
properties. Select the Policies Tab near the top left of the window,
and click your desired optimization level. press OK when finished,
and you may close the disk management applet.

14
Installing the One Button
Backup Software
The Titanium Mini Disk Drive is able to launch the VBTU backup
and synchronization utility included with your drive. The software
is compatible with Microsoft Windows 98SE, Windows 2000,
Windows XP, and Windows 2003.
Please make sure to have the drive connected and configured
before beginning the software installation
1. Insert the Included CD Rom, and navigare to the “One Button
Backup” Folder.
2. Launch the Installer
3. Follow the on screen instructions, and reboot if prompted.
4. To configure the task executed when the button is pressed,
please locate the application icon at the bottom right of your screen,
and double click to pull up the configuration window.
The application will perform the task enabled in step 4 any time the
button is pressed.
For additional information on configuration and use, please refer to
the on-line help of the backup utility.

15
How to Safely Dismount
and Turn Off the
External Hard Drive
What do 'mounting' and 'dismounting' mean? When a device such as
a hard drive is mounted, that means the computer ‘sees’ the device
and is able to communicate with it. When you dismount a device, the
computer no longer sees it. The device may still be running but the
computer cannot access it, as though the device no longer exists.
Never turn off or unplug a hard drive without dismounting
it first. Doing so could cause data on the drive to be lost
or damaged.
How to safely dismount and turn off the drive
with the computer running
Mac Users
Drag the icon for the External Hard Drive to the Trash. The Drive will
dismount and you can then safely turn if off. You may then unplug the
power cord and data cable if you want to disconnect the drive.
PC Users
1. Locate the System Tray. The System Tray includes the time
display in the bottom right, and icons to the left of the time. One of
the icons will be an icon with a green, diagonal arrow on it.
2. Left-click on this icon.
On Windows 98SE/ME a rectangle will appear with the
name of the Drive followed by the drive letter.
On Windows 2000/XP you will receive the alert message
“Safely Remove…” or “Stop…” followed by the drive letter for
the device.
3. Left-click on the appropriate device (with the drive letter matching
the one used by the External Hard Drive). After a few seconds,
Windows will give you a message that it is safe to remove the device.

16
4. Click OK. The Drive will dismount and you can then safely turn if
off. You may then unplug the power cord and data cable if you want
to disconnect the drive.
How to turn off and disconnect the
Drive with the computer turned off
(PC and Mac)
When you shut down your computer the Drive dismounts automatically.
With the computer turned off, simply turn off the Drive. You may
then unplug the power cord and data cable if you want to disconnect
the drive.

17
Performing Basic Tasks
How to open files and folders stored on the
External Hard Drive
PC and Mac Users
1. Double-click on the Drive icon. A window showing the files and
folders stored on the Drive will appear.
2. Double-click on the file or folder that you want to open.
How to copy files and folders to your External
Hard Drive
Mac Users
1. Highlight the file or folder that you want to copy by clicking on it,
but do not release the mouse button.
2. While keeping the mouse button pressed down, drag the
highlighted file or folder to the Drive icon or to a specific folder on
the Drive.
3. Release the mouse button. The file or folder will copy over.
PC Users
1. Single-click the file or folder that you want to copy in order to
highlight it.
2. Go to “Edit --> Copy”.
3. Double-click the Drive icon to open it.
4. If you want to copy the file or folder to a specific folder on the
Drive, double-click that folder to open it.
5. Go to “Edit --> Paste”. The file or folder will copy over.

18
Troubleshooting/
Frequently Asked
Questions (FAQs)
FAQs for Mac Users:
Q: Why is my Drive asking me to format it? It was already
formatted and it contains data.
A1: Run a disk repair utility on the drive.
A2: Perform permission repair on your system drive. Open the disk
utility (located in /Applications/Utilities/Disk Utility.app.) Select
your system drive (usually the first disk listed) and click "Repair Disk
Permissions" in the "First Aid" Tab.
A3: Restart your computer. As soon as the bootup chime sounds,
press and hold down the option-command-p-r key combination to
reset the PRAM. Release the keys when the chime sounds a second
time.
Please refer to your Mac manual for more information on these
procedures
Q: I’m using a USB connection on a Mac. Do I need to install the
USB 2.0 Installation CD?
A: No, the External Hard Drive uses the built-in Mac USB Mass
Storage Support software, which includes the necessary system
extensions.
Q: My computer does not recognize the Drive.
A: First, check to make sure that all of your connections are secure,
and that the power switch is in the "ON" position. Then check if
your External Hard Drive is listed in the Apple System Profiler. If the
problem persists, verify that the USB port used is functioning.
Q: I'm trying to copy files to/from FAT32 volumes or network
shares, and it keeps failing.
A: FAT32, HFS+, and other file system formats allow different
standards of filename length or use of special characters. Rename
the offending file(s) and try the operation again.

19
Q: I have a FAT32 disk, and when I try to copy a large file I get
an error saying there is not enough room on the drive-- I have lots
of free space!
A: FAT32 only allows files up to 4GB in size. To copy larger files, please
reformat the volume using MacOS Extended Format.
FAQs for PC Users:
Q: My computer does not recognize the Drive.
A: Make sure all of your connections are secure. If you have an add-
on card, make sure it is working properly and/or update the driver.
Also, make sure you have all the latest updates for your Windows
operating system.
Q: Does the Drive work with Norton Ghost?
A: Yes. Norton Ghost 2003 or newer support USB drives. Fantom
Drives does not provide any additional drivers.
Q: Where are the drivers for 2000/XP?
A: Windows 2000 and XP already include all the necessary drivers!
No additional drivers are necessary.
Q: When I leave my computer idle for a while, my Drive won’t
work properly.
A: The most likely cause is that your computer is going into sleep
mode. The immediate solution is to shut down your computer and turn
off the Drive, and then restart your computer. Once your computer is
completely booted up, turn on the Drive. You should see the drive in
the Windows Explorer. To prevent this problem from recurring, open
the “Power Settings/Energy Saver” and set it to never go into sleep
mode.
Q: Is the Drive compatible with Windows NT 4.0?
A: No.
Q: I do not see my Drive listed in the My Computer window, but it
does appear in the Device Manager list.
A: Right-click on My Computer. Select Manage in the pop-up menu. In
the Computer Management window, select Storage, then select Disk
Management. In the Disk Management window, you should see a list
of available storage devices. Look for the Disk that has a capacity
closest to your Fantom Drives External Hard Drive. Right-click on the
right-hand box; in the pop-up menu select Delete Partition. Once you
do this, it will say “Online" & "Unallocated”. Right-click on the box and

20
select Create New Partition in the pop-up menu. When the Partition
Wizard appears, select Primary Partition and click on Next. You will
see a default value for the Drive; click Next. You will then see a drive
letter (you can change this drive letter if you wish); click Next. You
will then be asked to format the Drive.
Q: Do you have “DOS Driver” for the Drive?
A: No.
Q: Can you make the External Hard Drive bootable?
A: This depends on your computer’s BIOS (Basic Input/Output
System). The BIOS contains code required to control a number
of miscellaneous functions. Please check with your computer
manufacturer for BIOS updates to determine if your computer’s BIOS
supports this feature.
Q: After I connected the Drive to my PC, I got the following alert
message: HI-SPEED USB Device Plugged into non-HI-SPEED USB
Hub.” What does this mean?
A: Windows 2000 and XP users will get this alert message if you
plugged the Drive into a USB port that only supports USB 1.1. This
is fine, except your Drive will operate USB 1.1 speeds.
If an issue cannot resolved by using our FAQ, please contact
Technical Support via the Fantom Drives support site at http://
www.FantomDrives.com/help