Fantom Drives DataDock II User manual

QuickStart
Installation Guide
Windows & Mac
Thank you for choosing Fantom Drives! Your Fantom Drives DataDock
II has been built to the highest standard of quality and workmanship,
is compatible with all USB, FireWire400, FireWire 800, or eSATA
capable Apple Macintosh computers running MacOS 10.3 (or greater)
and PC-Compatible computers running Windows 2000, Windows XP,
Windows 2003, and Windows Vista. We at Fantom Drives take great
pride in bringing personal satisfaction to each of our customers; When
used according to the instructions in this guide, your Fantom Drives
DataDock II will provide years of trouble-free operation.
DataDockII

Contents
Introduction ............................................................ 3
System Requirements ............................................. 3
Parts & Accessories List.......................................... 4
Precautions............................................................. 4
Fantom Drives External Hard Drive at a Glance.......... 5
Status Indicator Lights ............................................ 6
Connecting the Drive to Your Computer..................... 6
Setting the RAID operating mode.............................. 7
RAID Modes Descriptions ........................................ 8
RAID 1 (Mirror) ....................................................... 8
Span ...................................................................... 8
RAID 0 (Striping) ...................................................... 9
Hot Plug Disk Replacement ....................................... 9
Formatting Your DataDock II................................... 10
Formatting the Drive in Mac OS X ............................ 10
Formatting the Drive in Windows ............................. 11
Optimizing Windows Caching Algorithm .................. 12
How to safely dismount and turn off your
Fantom Drives External Hard Drive ......................... 13
Troubleshooting /
Frequently Asked Questions (FAQ) ........................ 14
General Questions ................................................. 14
FAQs for Mac Users .............................................. 15
FAQs for PC Users ................................................ 16
One Year Limited Warranty .................................. 18
Contact Information ..............................................20

3
Introduction
Welcome, and thank you for purchasing DataDock II eSATA+USB
High Capacity Hard Disk from Fantom Drives.
In photos and illustrations in this guide, The following alert symbols
are used in this guide:
This signifies important
information for ALL users.
This signifies important infor-
mation for USB 2.0 users.
This signifies important infor-
mation for eSATA users.
This signifies important infor-
mation for FireWire users.
The DataDock II Hard Disk can only sustain one connection type
at any given time; the drive will appear as an eSATA device when
connected via eSATA, a FireWire device when connected via
FireWire, and as a USB device if the USB cable is connected.
USB 2.0 compatibility with USB 1.x
USB 2.0 ports are backward compatible with USB 1.x. However,
if you connect the Drive to a USB 1.x port, it will operate at
USB 1.x speeds.
System Requirements
• Power Macintosh G4 or newer running Mac OS X 10.4 or newer
• 733 MHz Pentium 3 class PC or faster CPU running Windows XP
SP2, 2003, or Vista
• An available eSATA Port or
• An available USB 1.1 or 2.0 port or
• An available FireWire 400 port or
• An available FireWire 800 port

4
Parts &
Accessories List
The package contains the following items:
• Fantom Drives DataDock II Hard Disk
• Quick Start Installation Guide
• FireWire 400 cable • FireWire 800 cable
• eSATA cable • USB cable
• Disk Stand • AC Adapter
If you are missing any items listed above, please fill out the customer
support form at http://www.FantomDrives.com/help
Please retain a copy of your receipt. You will need it if
warranty repair service is required in the future.
Precautions
Please follow the precautions described below to avoid damage to
your DataDock II and void the warranty.
• DO NOT open the case. Doing so will void the warranty.
• DO NOT use a third-party AC adapter or power cord. Doing so
may damage the Drive and void the warranty.
• DO NOT bump, jar or drop the Drive as this may damage it or
result in loss of data.
• DO NOT disconnect any cables while the Drive is powered on
without first properly dismounting the device via your operating
system; doing so can result in data loss and possible damage.
• DO NOT set any liquids or beverages on the Drive as they may
damage the internal electronics.
• Fantom Drives highly recommends that you regularly back-up the
files stored on your Fantom Drives External Hard Drive. Fantom
Drives is not responsible for any data loss, nor will Fantom Drives
perform any recovery on lost data or files.

5
Fantom Drives
DataDock II Hard Disk
at a Glance
AC adapter port
Vent (Do not block)
USB 2.0 port
eSATA port
Security
Lock Slot
Power Switch
FireWire 800 Ports
FireWire 400
Port
Power/Rebuild
Status Light (blue)
Activity Status
Light (red)
Removable Disk
Modules
Disk Module Latches
Top Disk Fault
Bottom Disk Fault
Rebuild Status

6
Indicator Lights
The DataDock II provide information on its operation through the
indicator lights. There are two disk fault lights (one for each disk)
along with Rebuild Status light. Each module has a "Power/Rebuild
Status Light" (Blue) and a "Activity Status Light" (Red.) The following
is a description of the light functions:
1. Normal Operation: During normal operation the Power/Rebuild
light will glow solid blue on each disk module. The Activity light will
either be off or blinking on activity. The disk fault lights and rebuild
status lights are dark.
2. Disk fault: Disk fault light for the respective disk will glow red.
Power/Rebuild light is OFF for the disk module.
3. RAID 1 data rebuild: Rebuild Status light blinks orange. Survivor
power/rebuild light will blink, replacement module power/rebuild
light glows solid.
Connecting the drive
1. Plug the AC adapter cord into the power port on the back of the
Drive. The plug should not require much effort to insert. If the plug
will not go in, do not force it; the plug is probably upside down.
Rotate the plug and try again. Incorrectly inserting the plug could
damage the Drive and void the warranty.
2. Plug the power cord into the cord socket in the AC adapter. Plug
the other end into a three-prong outlet.
3. Plug in the eSATA, FireWire, or the USB 2.0 data cables.
The DataDock can only use one connection at a time. eSATA,
USB, and FireWire plugs are shaped so they can only be
properly inserted one way. Be sure to insert the plugs
properly or you may damage the Drive and void the warranty.
The GForce Megadisk Combo Hard Disk has two FireWire ports
for connecting additional FireWire device in a daisy chain.
4. Press the power switch located on the back of the DataDock
II Hard Disk. Once the Drive is powered up, your computer should
recognize it and the Drive will be ready to use.

7
Setting the RAID
Operation Mode
The DataDock II is preconfigured from the factory for Mirrored
operation (RAID 1.) If you wish to reconfigure it for a different
operation mode, please follow the instructions below.
You can configure your DataDock II to use different RAID modes to map
the physical hard drives to a virtual drive, or "volume", that is visible to
the host computer. The host operating system treats this volume as if
it's a single physical drive, overcoming restrictions that are imposed by
physical hard drives such as speed, storage capacity or data storage
reliability. To select a RAID mode, make sure that the unit is powered
off and refer to the following instructions:
1. Set the rotary switch on the back of the DataDock II with a small
flathead screwdriver to the desired storage policy. Please refer
to page 5 for the locations of the
storage policy mode switch and
commit button.
2. Turn on the DataDock II.
3. The Power/Rebuild lights will
begin to blink. Press and hold the
recessed "Mode Change Commit" button with a pin
or paperclip for about 5 seconds until the Power/Rebuild lights
stop blinking.
Please exercise care before pressing the "Commit" button.
Creating new virtual volumes will destroy any existing data
that existed on the previous volume!
When changing RAID modes to an existing volume, it is necessary
to remove the existing disk partition prior to changing the RAID
mode, or the new volume may appear to have a partition with
the wrong size or will be unformattable. You may use your
computer's disk utility (Mac: /applications/disk utilty, Windows: \
Windows\System32\diskmgmt.msc) to remove the partition(s) on
the DataDock II. Please consult your OS help or visit http://www.
fantomdrives.com/support/faqs for additional information.
RAID 0
SPAN
RAID 1

8
RAID Modes
RAID 1
The RAID 1 storage policy stores all data in duplicate on each drives
to protect against data loss due to drive failure, and is the default
configuration of the DataDock II. One drive mirrors the other at
all times, which means every write operation goes to both drives.
RAID 1 provides the highest level of data fault tolerance, but halves
the amount of storage capacity because all data must be stored
twice. The resulting storage capacity of the virtual volume will be
equivalent to the size of one hard drive. If one drive fails, the volume
is still usable, but it is in a vulnerable state because its mirrored
hard drive is inaccessible. When the offline drive is replaced, the
DataDock II will begins a rebuild process immediately to restore data
redundancy.
Although the volume remains available during the rebuild
process, the volume is susceptible to data loss through
damage to the remaining drive until redundancy is restored
at the end of the rebuild and verification process.
Host access takes precedence over the rebuild process. If you
continue to use the volume during the rebuild, the rebuild process
will take a longer time to complete, and the host data transfer
performance will also be affected.
Span
The Span storage policy concatenates the two physical hard drives
as a single large volume, resulting in a seamless expansion. Hard
drive A and B are concatenated into a single virtual volume with a
storage capacity that is equal to the sum of each of the physical
hard drives A and B. In the event of disk failure the surviving
member of the span is likely recoverable, but because the data is
written sequentially to one disk and then the other the data available
for recovery may vary depending on which member failed.

9
RAID 0
The RAID 0 (striping) storage policy presents the best data speed by
using both disks in parallel. Hard drive data segments are written
to different disks simultaneously which increases performance, but
at an increased fault sensitivity (two drive's worth of data may be
lost at a single disk fault.) The FAST storage policy creates a single
virtual volume that is striped across both hard drives, with a storage
capacity that is equal to the sum of both hard disk drives.
RAID 0 has no fault tolerance. A single disk failure will cause
loss of ALL data, and is very difficult to recover. RAID 0
should only be used when speed is required and the data can
be recovered from backup.
Hot Plug Drive Replacement
In the event of a disk failure, the DataDock II supports the ability to
hot-swap drives without powering down the system. A data module
can be removed and replaced without powering off the unit or
taking the system off line. In RAID1 configuration, the rebuilding will
proceed automatically in the background. A failed drive will have a
dark "Power/Rebuild" light. To replace a drive, please follow these
steps:
1. Gently press the drive release latch (see page 6, “The DataDock II
Interface components”) to release the drive tray.
2. Gently pull out the disk drive tray handle and slide out
the drive tray.
3. To replace: Slide in the
replacement drive tray with the
tray handle open. When the tray
is slid all the way into the DataDock
II, push the tray handle closed.
Replacing a disk module may interrupt the host connection
momentarily. Please make sure that there are no open files
on the DataDock volume before replacing a disk module.
NEVER remove a drive tray without replacing it. Operating
the RAID with a drive tray missing will disrupt airflow and
may cause the DataDock II to fail.

10
Formatting Your Drive
Your DataDock II comes preformatted at the factory with the FAT32 file
system, which will mount on most modern operating systems. FAT32
has some limitations, and we recommend you reformat the volume to a
file system format more compatible with your particular computer and
operating system environment.
Formatting a hard drive erases all data contained on it. Please
be sure to create a copy of the files you wish to keep to another
location before reformatting.
Formatting the drive in Mac OS X
1. Launch the “Disk Utility” application located under Applications/
Utilities folder.
2. Highlight your new drive and select the “Partition” tab
3. Select the new partition map type.
4. For each partition in the volume scheme, select the desired file
system format and volume name (optional)
Although it is possible to format a hard drive on Mac OS X
using the DOS file system, we do not recommend this, as
an artificial capacity limit may be imposed on the drive and
performance will be unpredictable.
5. Click the “Options” button. Select “Apple Partition Map” in the
dialog box and click “OK”.
6. Click “Apply.” Your DataDock II is ready to use!
2
3
34
6
5

11
Formatting the Drive in
Windows 2000/XP/2003/Vista
1. Open the disk management console, located at \Windows\
System32\diskmgmt.msc on your system drive. A list of the
attached drives and their respective volumes will appear. Select the
Fantom Drives DataDock II Disk.
2. Right-click on a DataDock II volume. If it’s not initialized, a red “No
Entry” logo will cover the disk icon. Right click on the disk and select
“Initialize Disk.” Follow the on-screen instructions.
3. Right-click the initialized volume (The area right of the disk icon.)
In the context menu, select “New Partition.” Follow the on screen
instructions. In the File System pop-up menu, select NTFS. The
default formatting option is Full format. A Full format will take about
30-90 minutes. A Quick format will take just a few minutes, but will
do less verifying of the Drive than a Full format. Click Start. Once
the format process is complete, your DataDock II is ready to use.
23

12
Optimizing Windows Caching Algorithm
By default, Windows XP optimizes caching for performance on
external drives. Vista optimizes caching for quick removal. As a
result, Windows XP appears to have faster access to external disks
but at a greater risk of data corruption and loss. To change Windows'
caching algorithm, open the
disk management console
located at \Windows\
System32\diskmgmt.msc
on your system drive. A list
of the attached drives and
their respective volumes
will appear. Right-click
on the Fantom external
disk in the disk list and
select properties. Select
the Policies Tab near the
top left of the window,
and click your desired
optimization level. press
OK when finished, and
you may close the disk
management applet.
Optimizing for performance can greatly enhance the
throughput of your disk but is much more vulnerable to
data loss! Make sure to have appropriate backup strategies
before enabling this feature!

13
How to safely dismount and turn off the Drive
with the computer running
Mac Users
Drag the icon for the External Hard Drive to the Trash. The Drive will
dismount and you can then safely turn if off. You may then unplug
the power cord and data cable if you want to disconnect the drive.
PC Users
1. Locate the System Tray. The System Tray includes the time display
in the bottom right, and icons to the left of the time. One of the icons
will be an icon with a green, diagonal arrow on it.
2. Left-click on this icon. You will receive the alert message “Safely
Remove…” or “Stop…” followed by the drive letter for the device.
3. Left-click on the appropriate device (with the drive letter matching
the one used by the External Hard Drive). After a few seconds,
Windows will give you a message that it is safe to remove the device.
4. Click OK. The Drive will dismount and you can then safely turn if
off. You may then unplug the power cord and data cable if you want
to disconnect the drive.
How to turn off and disconnect the
Drive with the computer turned off
(PC and Mac)
When you shut down your computer the DataDock II volume
dismounts automatically. With the computer turned off, simply turn
off the Drive. You may then unplug the power cord and data cable if
you want to disconnect the drive.

14
Troubleshooting
General Questions
Q: I bought a 500GB drive, but my computer is showing 465GB.
Where is the missing capacity?
A: Hard drive manufacturers market drives in terms of decimal
(base 10) capacity. In decimal notation, one megabyte (MB) is
equal to 1,000,000 bytes, and one Gigabyte (GB) is equal to
1,000,000,000 bytes. Many operating systems use the binary
(base 2) numbering system to describe disk capacity; In the binary
numbering system, one megabyte is equal to 1,048,576 bytes, and
one gigabyte is equal to 1,073,741,824 bytes. Simply put, decimal
and binary translates to the same amount of storage capacity.
Q: Is my external hard drive bootable?
A: Yes! As long as your host hardware and operating system support
booting from eSATA or USB. Refer to your computer’s documentation
for more information
Q: My drive was working fine yesterday but now its gone!
A: The disk may have been shut down without being dismounted, or
may have failed. If you do not hear and feel the drive spin up when
you connect the power, the drive will need to be replaced. If you verify
that the computer input and the drive data cable are working, you
may be able to repair or recover the data with your computer’s disk
repair utility or a third party utility.
If your disk repair utility cannot repair or see the disk, the drive
has failed and will need to be replaced. If data recovery is desired,
please contact an established professional data recovery firm. For
a checklist of what qualities you might seek, see www.drivesavers.
com/why_drivesavers/index.html or www.ontrack.com/services.

15
Q: Can I leave my DataDock II on all the time, or should I turn
it off when not in use?
A: The DataDock II is meant to be left on, but does not add any
limitations on being turned off. Drive reliability is definitely
affected by repeated power cycles, and the DataDock II cannot
alleviate this. In addition, Fantom Drives recommends that
the drive’s power supply is connected through a UPS or surge
protector; In case of a power surge or brown/black out the
hard drive’s sensitive electrical components will not be damaged.
Lastly, as long as the DataDock II is configured as a parity or
mirrored RAID, you will be able to sustain a disk failure without
losing access to your data.
FAQs for Mac Users:
Q: Why is my drive asking me to format it? It was already
formatted and it contains data.
A1:Run a disk repair utility on the drive.
A2:Perform permission repair on your system drive. Open the
disk utility (located in /Applications/Utilities/Disk Utility.app.)
Select your system drive (usually the first disk listed) and click
"Repair Disk Permissions" in the "First Aid" Tab.
A3:Restart your computer. As soon as the bootup chime sounds,
press and hold down the option-command-p-r key combination
to reset the PRAM. Release the keys when the chime sounds
a second time. Please refer to your Mac manual for more
information on these procedures
Q: My computer does not recognize the drive.
A: Check to make sure that all of your connections are secure
and that the power switch is in the "ON" position. Then check if
your External Hard drive is listed in the Apple System Profiler. If the
problem persists, verify that the port used is functioning.
Q: I'm trying to copy files to/from FAT32 volumes or network
shares, and it keeps failing.
A: FAT32, HFS+, and other file system formats allow different
standards of filename length or use of special characters.
Rename the offending file(s) and try the operation again.
Q: I have a FAT32 disk, and when I try to copy a large file I
get an error saying there is not enough room on the drive-- I
have lots of free space!
A: FAT32 only allows files up to 4GB in size. To copy larger files,
please reformat the volume using MacOS Extended Format.

16
FAQs for PC Users:
Q: My computer does not recognize the drive.
A: Make sure all of your connections are secure. If you connecting
the disk to an add-on card, make sure it is working properly and/or
update the driver. Also, make sure you have all the latest updates for
your Windows installation
Q: Does the drive work with Norton Ghost?
A: Yes. Norton Ghost 2003 or newer support USB drives. Fantom
Drives does not provide any additional drivers.
Q: I formatted my hard disk under Windows XP, but my Vista machine
does not allow me to delete or modify files on the drive.
A: Windows Vista and XP handle file permissions differently. In
Windows XP the default user group has full permissions to every
volume, whereas in Vista they do not. To fix this condition, you need
to grant the users group modify privileges to the drive:
1. Right-click the drive letter in Explorer and select properties
2. Click the security tab
3. Click "Edit." You will be asked to enter your administrator password.
4. Select "Users" and check the Modify box
5. Click OK.
Q: Where are the drivers for my operating system?
A: Windows 2000 and newer already include all the necessary
drivers. There are no drivers available for Windows NT or 98.
Q: When I leave my computer idle for a while, my drive won’t
work properly.
A: The most likely cause is that your computer is going into sleep
mode. The immediate solution is to shut down your computer and turn
off the drive, and then restart your computer. Once your computer is
completely booted up, turn on the drive. You should see the drive in the
Windows Explorer. To prevent this problem from recurring, open the
“Power Settings/Energy Saver” and set it to never go into sleep mode.

17
Q: I do not see my drive listed in the My Computer window, but it
does appear in the Device Manager list.
A: Right-click on My Computer. Select Manage in the pop-up menu. In
the Computer Management window and navigate to Storage -> Disk
Management. In the Disk Management window, you should see a list
of available storage devices. Look for the Disk that has a capacity
closest to your Fantom Drives External Hard drive. Right-click on the
right-hand box; in the pop-up menu select Delete Partition. Once you
do this, it will say “Online" & "Unallocated”. Right-click on the box and
select Create New Partition in the pop-up menu. When the Partition
Wizard appears, select "Primary Partition" and click "Next." You will
see a default value for the drive; click Next, You will then see a drive
letter (you can change this drive letter if you wish); click Next. You
will then be asked to format the drive.
Q: After I connected the drive to my PC, I got the following alert
message: HI-SPEED USB Device Plugged into non-HI-SPEED USB
Hub.” What does this mean?
A: This alert message means you plugged the drive into a USB port
that only supports USB 1.1. Your drive will be accessible but will
operate at USB 1.1 speeds.
If an issue cannot resolved by using our FAQ, please contact
Technical Support via the Fantom Drives support site at http://
www.Fantomdrives.com/help

18
18
One Year
Limited Warranty
Fantom Drives warrants this product (the “Product”) against defects in
material or workmanship as follows:
1. LABOR: For a period of one (1) year from the original date of purchase
from Fantom Drives or its authorized relseller, Fantom Drives will repair
defective Product (or, at its option, replace with a new or recertified product)
at no charge. After this 1 year period, you must pay for all labor charges.
2. PARTS: For a period of one (1) year from the original date of purchase
from Fantom Drives or its authorized reseller, Fantom Drives will supply,
at no charge, new or rebuilt replacement parts in exchange for defective
parts of this Product. Any replacement parts will be warranted for
the remainder of the original warranty period or ninety (90) days from
installation by Fantom Drives. All exchanged parts replaced under this
warranty will become the property of Fantom Drives.
This warranty only covers the hardware components packaged with the
Product. This warranty does not cover any software contained in, or
included with, the Product; any such software is provided “AS IS”. Please
refer to any documentation included with the software for your rights and
obligations with respect to the software.
This warranty extends only to you, the original purchaser. It is not
transferable to any one who subsequently purchases the Product from you.
Proof of purchase in the form of a bill of sale (which is evidence that
the Product is within the warranty period) must be presented to obtain
warranty service.
To obtain warranty service you must take the Product, or deliver the
Product freight prepaid, in either it’s original packaging, or in a package
that provides the Product with a degree of protection equivalent to that of
the original packaging, to Fantom Drives. Please contact Fantom Drives at
the number listed on the reverse side for further information.
Fantom Drives is not responsible for any damage to, or loss of, any programs,
data, or other information stored on any media or any part of any Product
serviced hereunder. Be sure to remove all features, parts, options, alterations,
and attachments not under warranty prior to returning the Product to Fantom
Drives. Fantom Drives is not liable for any loss or damage to these items.

19
19
This limited warranty does not cover: (1) any consumables (such as
batteries) supplied with this product; cosmetic damages; damage or loss
to any software programs, data or removable storage media; or damage
due to the Product such as but not limited to excessive heat or humidity, or
modifications of this Product; (2) improper installation, operation, testing or
maintenance of this Product; (3) power failure or connection to improper
voltage supply; or; (4) attempted repair by any party other than Fantom
Drives. This Warranty does not apply when the malfunction results from the
use of this Product in conjunction with accessories, products or ancillary or
peripheral equipment, or where it is determined by Fantom Drives that there
is no fault with this Product itself.
This Limited Warranty is invalid if the factory applied serial number has been
altered or removed from the Product.
Repair or replacement as provided under this warranty is the exclusive
remedy of the consumer. Fantom Drives shall not be liable for any incidental
or consequential damages for breach of any express or implied warranty,
breach of contract, negligence, strict liability or any other legal theory related
to this product. Such damage include, but are not limited to, loss of profits,
loss of data, loss of use of the product or any associated equipment, down
time and purchaser’s time. Except to the extend prohibited by applicable law,
any implied warranty of merchantability or fitness for a particular purpose on
this product is limited in duration of this warranty.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long on implied warranty
lasts, so the above limitation or exclusions may not apply to you. This
warranty gives you specific rights; you may have other rights which vary
from state to state.

1-26-2009 DD2QM Rev 1
The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the
preparation of this document to assure its accuracy, Fantom Drives and Fantom Drives assume no liability resulting from errors or omissions in
this document, or from the use of the information contained herein.
Fantom Drives reserves the right to make changes in the product design without reservation and without notification to its users.
Fantom Drives, The Fantom Drives Logo, Fantom Drives and the Fantom Drives logo are registered trademarks of Fantom Drives Technology.
Macintosh, and the MacOS Logo are trademarks of Apple Computer Inc. Microsoft Windows, the Windows Logo, and Windows Vista are
registered trademarks of Microsoft Corporation. Kensington and the Kensington Security Slot are trademarks of Kensington Computer Products
Group (KTG.) All other names and logos are property of their respective owners.
Copyright © 1999, 2009 Fantom Drives Technology. All rights reserved. This publication may not be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, in whole or in part, without the prior written consent of Fantom Drives, 19260 Van Ness Ave., Torrance CA
90501.
WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC Compliance Statements
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and
can radiate frequency energy and, if not installed and used in accordance with the instructions, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to equipment off and on, the user is encouraged to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the distance between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Fantom Drives
19260 Van Ness Avenue
Torrance, CA 90501
Sales: 310-320-7272
Support: http://www.FantomDrives.com/help
www.FantomDrives.com
By MicroNet