Farho ECG User manual

QUICK GUIDE ECG /ECGW
Acve Funcons
Programs
Power Control
Smart Start
Open-window Detect
Consumpon indicator
Navigaon keywords
Move up
Move Down
Accept / Return
On the screen, the room
temperature is displayed in
big, while the setpoint
temperature is shown in
small print.
By pressing buons
the set temperature is
adjusted.
By pressing the menu
opons are displayed as
detailed.

Seng the Clock
Press the "OK" buon and go to "Sengs-Advanced Sengs-Time" and set the me and day of
the week.
Language Conguraon
Press the "OK" buon and go to "Sengs-Advanced Sengs-Language," select the language
with the "up/down" buons, and press "OK."
Creang a Program
From the main screen, press the "OK" buon, and using the "up/down" buons, navigate to
the "Programs" menu and press "OK." Press the "OK" buon again to acvate or deacvate
programs, and use the buons to navigate through the other menus. Go to the "Edit" menu
and press "OK."
Select the days of the week that will have the same schedule by pressing "OK" on each of
them. Then, scroll down and press "OK" on "Next."
You will be presented with a screen with 6 empty me slots. Press "OK," and you will be asked
for the start me, end me, and desired temperature for that me slot. Once entered, press
"OK." Repeat this operaon as many mes as necessary to create the desired program.
You can congure up to 6 dierent me slots from 00:00 hours to 24:00 hours. It is not
necessary to ll in all 6 me slots, only those you need. In the unprogrammed me slots, the
emier will be in an-freeze mode (5°C).
Example:
Suppose we want a program from 07:00 to 10:00 at 21°C and from 18:00 to 23:00 at 22°C. It
would look like this:
Time Slot 1: Start Time: 07:00; End Time: 10:00; Temperature: 21°C
Time Slot 2: Start Time: 18:00; End Time: 23:00; Temperature: 22°C
For the rest of the day, from 00:00 to 07:00, from 10:00 to 18:00, and from 23:00 to 24:00, the
emier will be in an-freeze mode (5°C).

Master ECG Wi Conguraon.
To control our ECGW emier through the "Farho control" app, follow these steps:
1. With the emier turned o, press the buon and turn on the emier. On the screen,
you will see the following:
2. Aer a few seconds, you will see the following: This means that
the emier has generated a WiFi network to which we need to
connect from our mobile phone.
3. From our mobile phone, we connect to that WiFi network. The
phone will redirect us to a page where we will need to enter
the name of our home WiFi network and its password to
connect our emier to the WiFi network.
1. Once this is done, on the screen, you will see the following: In this
menu, we have 4 opons.
•Update: Our emier will check for rmware updates and update
to the latest version.
•Set Master: It will become the master emier of our installaon,
through which we will connect with our "Farho Control" app and
the rest of the emiers.
•Reset: We will reset our emier.
•Quit: We will exit BOOT MODE, and the emier will start in normal mode.

2. Once you have selected "SET MASTER," the emier will restart, and on
the screen, you will see the following: Once you see that the emier is
"online," you can proceed to pair it with our "Farho Control" app.
Pairing the Emier with the "Farho Control" App
Once you have downloaded the "Farho Control" app, launch it. Aer
accepng the terms and condions on the mobile screen, you will see
the following:
At this point, go to your emier, press the "OK" buon, and navigate to
"Sengs-Advanced Sengs-Pair with App." Then press "OK." At this
moment, a new zone with an emier will be generated in your "Farho
Control" app, and you can now control your emier from your mobile
device.