Farm King RP2 Product manual

112023 FK450
OPERATOR AND PARTS MANUAL
Wheel Rake
Model RP2, RP4, RP5

RP2, RP4, RP5 Wheel Rake
1
Table Of Contents
Warranty Registration Form 3
Introduction 5
Owner’s Information 7
Equipment Identification 8
Safety 9
Safety Instructions 11
Fire Prevention 14
Equipment and Safety Decals 16
Safety Sign-Off Form 17
Operation 19
Pre - Operation Checklist 21
EnteringThe Operator’s Position 21
LeavingThe Operator’s Position 21
Tractor Requirements 21
ConnectingToTractor 22
Work Configuration 24
Field Operation 26
Adjustments 27
Transport Configuration 29
Maintenance 33
Service Schedule Chart 35
Lubrication 36
Rake Wheels 38
Storage And ReturnTo Service 39
Decal Installation 39
Parts Identification 41
Hitch, Arm - RP2 43
Hitch - RP4, RP5 44
Arms - RP4, RP5 46
Rake Wheels 48
Manufacturer’s Statement: For technical reasons, Buhler Industries Inc. reserves the right to modify
machinery design and specifications provided herein without any preliminary notice. Information provided
herein is of descriptive nature. Performance quality may depend on soil fertility, applied agricultural
techniques, weather conditions, and other factors.

RP2, RP4, RP5 Wheel Rake
2
Specifications And Shipping Kit Numbers 51
Specifications 53
Shipping Kit And Bundle Numbers 53
HardwareTorque Values 54
Warranty 57
Farm King Base Limited Warranty 59

Warranty Registration Form - RP2, RP4, RP5 Wheel Rake
3
Warranty Registration Form
This form must be filled out by the dealer and signed by both the dealer and the customer at the time
of delivery.
Customer Name:
Customer Address:
City: Prov / State:
Postal / Zip Code: Phone:
Dealer Name:
Dealer Address:
City: Prov / State:
Postal / Zip Code: Phone:
Equipment Model: Serial Number: Delivery Date:
I have thoroughly instructed the buyer on the above described equipment which review included the Operator and Parts
Manual content, equipment care, adjustments, safe operation and applicable warranty policy.
Rake wheels spin freely
Fasteners tightened
Grease points lubricated
Rake tines properly oriented
Rake arms pivot freely
Inspect three-point hitch
Safety chain on hitch
Decals installed
Guards and shields installed
Lights and reflectors installed
Review operating and safety instructions
Date: Dealer Rep. Signature:
The above equipment and Operator And Parts Manual have been received by me and I have been thoroughly instructed as to
care, adjustments, safe operation and applicable warranty policy.
Date: Customer / Owner Signature:
Remove this Warranty Registration Form from the Operator And Parts Manual. Make two copies of
the form. Send original Warranty Registration Form to Farm King. Give one copy to the customer and
the dealer will keep one copy.
Dealer Inspection Report Safety

Warranty Registration Form - RP2, RP4, RP5 Wheel Rake
4

Introduction - RP2, RP4, RP5 Wheel Rake
5
Introduction
This Operator And Parts Manual was written to give the owner / operator instructions on the safe
operation, maintenance and part identification of the Farm King equipment. READ AND UNDERSTAND
THIS OPERATOR AND PARTS MANUAL BEFORE OPERATING YOUR FARM KING EQUIPMENT. If you
have any questions, see your Farm King dealer. This manual may illustrate options and accessories not
installed on your Farm King equipment.
Owner’s Information 7
Serial Number Location 7
Equipment Identification 8

Introduction - RP2, RP4, RP5 Wheel Rake
6

Introduction - RP2, RP4, RP5 Wheel Rake
7
Owner’s Information
Thank you for your decision to purchase a Farm
King Hay Rake. To ensure maximum performance
of your equipment, it is mandatory that you
thoroughly study the Operator And Parts Manual
and follow the recommendations. Proper operation
and maintenance are essential to maximize
equipment life and prevent personal injury.
Operate and maintain this equipment in a safe
manner and in accordance with all applicable local,
state, and federal codes, regulations and / or laws.
Follow all on-product labeling and instructions.
Make sure that all personnel have read this
Operator And Parts Manual and thoroughly
understand safe and correct operating, installation
and maintenance procedures.
Farm King is continually working to improve its
products. Farm King reserves the right to make
any improvements or changes as deemed practical
and possible without incurring any responsibility
or obligation to make any changes or additions to
equipment sold previously.
Although great care has been taken to ensure the
accuracy of this publication, Farm King makes
no warranty or guarantee of any kind, written or
expressed, implied or otherwise with regard to the
information contained within this manual. Farm
King assumes no responsibility for any errors
that may appear in this manual and shall not be
liable under any circumstances for incidental,
consequential or punitive damages in connection
with, or arising from the use of this manual.
Keep this manual available for frequent reference.
All new operators or owners must review the
manual before using the equipment and annually
thereafter. Contact your Farm King Dealer if you
need assistance, information, or additional copies
of the manual.
Visit our website at www.farm-king.com for a
complete list of dealers in your area.
The directions left, right, front and rear, as
mentioned throughout this manual, are as viewed
by the operator sitting in the tractor seat while
towing the implement.
Serial Number Location
Please enter the model and serial number in the
space provided for easy reference.
Figure 1
Model Number:
Serial Number:
The serial number plate (Item 1) is located on the
front of the hitch frame [Figure 1].
Always use your serial number when requesting
information or when ordering parts.
1

Introduction - RP2, RP4, RP5 Wheel Rake
8
Equipment Identification
RAKE
WHEEL
RAKE
TINES
LOWER THREE-POINT
MOUNT
UPPER THREE-POINT
MOUNT
SHOCK ABSORBING
SPRING
FIXED
FRAME
PIVOT
FRAME
LOCKING
PINS
RAKE ARM
AND HUB
RP4 HAY RAKE PICTURED
STAND