FASTIME 5010 User manual

Instructions For the Fastime 5010 Stopclock: With Timer, Clock and
optional Decimal minute functions
Remove the battery cover and fit the R14 battery
into the correct position. Replace the battery cover
To set the clock and date:
Slide the switch to the CLOCK SET position
To set the time, press and hold the hour and minute buttons separately to fast forward
to the correct time. Press the second button to zero the seconds display.
To change between 12 and 24 hour displays, press the SPLIT/RESET button
To set the date display, press the START/STOP button to alter the display.
To adjust the day/date and month, press the HOUR, MINUTE and SECONDS buttons
To set the alarm:
Slide the switch to the ALARM position.
Set the alarm by pressing the HOUR & MINUTE buttons
Set the alarm function by pressing the RESET button. The alarm sign will show on the
left of the display.
To turn the alarm sound off, press either of the top buttons
To turn the alarm function off, with the slide switch at ALARM, press the SPLIT/RESET
button
To operate the Stopclock:
Slide the switch to the COUNT UP position.
There are 4 modes selectable by pressing the HOUR button
STW = 1 second to 23 hours, 59 minutes, 59 seconds
STW +1/100s = 1/100th second to 59 minutes, 59.99 seconds
STW + DMS = 1/100th second to 9999.99 seconds
STW + DM = 1/100th minute to 1999.99 minutes
The count up function operates using the START/STOP buttons with a lap option by
pressing the SPLIT/RESET button.
When the lap is being held the display shows SPL above the seconds display. To
restart the count up after the lap time has been noted, press the SPLIT/RESET button.
To stop and set the time back to zero, press the START/STOP button and then the
RESET button.

AST Limted. [phone]. E.mail: [e-mail] www.astopwatch.com
To operate the Memory Timer:
Slide the switch to the TIMER position
Press the HOUR MINUTE & SECOND buttons to set the time period required. If an
error occurs in setting, press the RESET button and start again.
The memory facility will display MEM on the right of the display, after setting the unit
and before pressing the START button.
When the set time has elapsed an alarm will sound, which is turned off by pressing the
STOP button.
After the alarm has sounded, the display will count up the time taken to turn off the
alarm.
After the STOP button has been pressed at the end of the countdown period, the last
timing period that is stored in the memory is displayed.
The timing period can be stopped and re-started by pressing the START/STOP button.
The unit operates from one “C” size R14 battery that should have a life expectancy in
excess of one year