Fein ASye 636 Kin Quick start guide

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
July12, 2004
ASye 636 Kin
Hand Drill

Fein Power Tools
ASye 636 Kin
Item Item Number Description Reqd.
10 3-19-01-117-01-5 MOTOR HOUSING 1
20 3-07-01-234-00-2 SPEED CONTROL 1
30 3-07-22-161-01-3 CAPACITOR 1
50 3-07-12-043-00-1 BRUSH HOLDER 2
80 3-07-11-059-00-7 CARBON BRUSH 2
90 3-07-13-010-00-9 BRUSH HOLDER CAP 2
100 4-30-02-014-99-8 SCREW 4
101 4-24-43-002-99-2 LOCKING WASHER 3
120 5-1-203-002-11-3 FIELD COIL 1
130 4-30-02-025-99-1 SCREW 2
140 3-14-28-004-00-0 INSULATING RING 1
165 3-07-07-101-01-2 CABLE 1
170 3-14-13-142-00-9 PROTECTING SLEEVE 1
180 3-24-31-021-00-7 CABLE CLAMP 1
190 4-30-46-002-00-5 SCREW 2
200 3-12-01-066-00-5 HANDLE 1
220 3-28-05-119-00-8 SWITCH SLIDE 1
230 4-30-66-006-03-2 SCREW 1
240 4-30-46-024-00-5 SCREW 1
250 4-30-66-002-99-2 SCREW 1
300 3-37-57-040-00-0 GEAR WHEEL 6T 1
301 5-3-203-001-11-2 ARMATURE 1
310 4-30-64-001-99-3 SCREW 3
330 4-17-01-001-17-2 BALL BEARING 608-RS1 2
340 3-15-06-139-00-8 INTER BEARING 1
350 3-15-08-099-00-1 GEAR HOUSING 1
360 3-26-18-041-00-2 THREADED RING 1
370 4-17-01-007-03-8 BALL BEARING 1
380 4-26-16-013-00-1 LOCKING RING 1
390 3-34-01-056-00-6 DRILL SHAFT 1
391 3-06-02-005-00-9 PACKING RING 1
410 3-36-57-009-00-2 GEAR WHEEL 1
460 4-17-01-202-01-8 BALL BEARING 608-RS1 1
470 4-30-02-024-99-7 SCREW 2
480 4-30-02-021-99-2 SCREW 2
481 4-24-43-002-99-2 LOCKING WASHER 4
490 3-26-12-055-00-8 PACKING RING 1
500 6-32-04-020-00-5 QUICK-ACTION CHUCK 1