Fein ASze 648a Quick start guide

SERVICE
Toolserviceandmaintencancemustbeperformedonlybyqualified
repairpersonnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessaryto per-formthese repairs.Service orrepairs performed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “Authorized Warranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
Nov 23, 2004
Hand Drill
ASze 648a

Fein Power Tools
ASze 648a
Item Item Number Description Reqd.
10 3-19-02-024-00-9 MOTOR HOUSING 1
20 3-07-12-067-01-7 BRUSH HOLDER 2
40 4-30-41-001-99-4 SCREW 4
50 3-07-11-067-00-4 CARBON BRUSH 2
60 4-30-03-029-04-8 SCREW 2
70 5-1-213-001-11-9 FIELD COIL 1
90 4-30-01-004-04-2 SCREW 2
100 3-14-28-010-00-5 AIR CONDUCTING RING 1
120 3-07-01-073-00-5 REVERSING SWITCH 1
130 3-14-13-090-00-3 CABLE PROTECTING SLEEVE 1
145 3-07-05-035-01-3 CABLE 1
150 3-24-31-021-00-7 CABLE CLAMP 1
160 4-30-41-011-99-3 SCREW 2
170 3-07-22-057-00-2 CAPACITOR 1
180 4-30-03-013-99-1 SCREW 1
190 3-24-28-052-00-9 COVER 1
200 4-30-66-003-99-6 SCREW 1
210 4-30-41-013-04-7 SCREW 3
220 3-07-62-003-01-6 SPEED CONTROL 1
230 3-09-04-038-00-6 CUP SPRING 1
250 5-3-213-003-11-8 ARMATURE 1
290 3-10-04-010-00-3 FAN 1
360 3-15-06-178-00-0 INTERM HOUSING 1
370 3-15-08-121-00-9 GEAR HOUSING 1
390 3-34-01-064-00-8 DRILL SHAFT 1
400 4-17-01-218-02-4 BALL BEARING 608-RS1 1
410 3-05-01-223-00-7 SLEEVE 1
420 4-26-39-005-00-0 SEALING RING 1
430 4-17-01-213-01-1 BALL BEARING 608-RS1 1
440 3-36-63-030-00-1 GEAR WHEEL 1
450 3-26-18-032-00-6 THREADED RING 1
460 3-37-63-012-00-4 GEAR WHEEL 1
470 3-36-63-028-00-5 GEAR WHEEL 1
480 4-17-01-001-01-0 BALL BEARING 608-RS1 2
500 4-30-35-023-05-7 SCREW 2
510 4-30-35-025-05-9 SCREW 2
520 4-24-43-004-05-7 LOCK WASHER 4
530 3-26-12-058-00-3 PACKING RING 1
540 4-17-01-207-09-6 BALL BEARING 608-RS1 1
550 4-17-01-204-13-1 BALL BEARING 608-RS1 1
560 3-21-19-032-00-2 HANDLE 1