FeiYu Tech WCP2S User manual

Waterproof Case
for Feiyu Pocket 2S
Manual Product Model: Feiyu-WCP2S
V 1.0

1. Overview
3. Installation
2. Check
[1] Waterproof cover
[2] Securing ring
[3] GoPro adapter*
[4] Power button
[5] Thread hole for adapter
[6] 1/4 inch thread hole
[7] Recenter button
[8] Shutter button
[1]
[2]
[3]
[4]
[6]
[5]
[7]
[8]
(1) Select diving mode: Turn on Feiyu
Pocket 2S, slide down in home page and
choose "Diving mode"*, follow the tips to
operate the device, select "Power off" to
power off immediately, select "Later" , the
device will not auto power off, please
power off the device manually.
Check the waterproof performance before using for the first
time or has not been used for a long time.
Before placing the device into the waterproof case, mount on
the waterproof cover and completely tighten the securing ring
and dip the case into water with a depth of 30 cm for at least
10 mins. lf water seeps in, take it out and check the case.
(2) Place in the device: Power off the
Feiyu Pocket 2S in diving mode, then
place it in the waterproof case.
*GoPro adapter [3] can be manually removed and install to thread hole[5]

4. Operation
Please make sure the securing ring is tightened
Long press:
Power on/off
Single tap:
Switch shooting modes
Double tap:
Recenter
Single tap:
Take photo/video
(3) Insert into fixed bracket: Insert the
base of Feiyu Pocket 2S into fixed bracket.
(4) Install waterproof cover: Put
the securing ring on the waterproof
cover, clip in the mount on the
handle of waterproof case, tighten
the securing ring.
Shake the waterproof case by
hand, check if there is any clearance
which may cause shaking of the
device. If so, please tighten the
securing ring again.
Diving mode is a working mode which work with waterproof
case.
Disable: Joystick/flip/follow mode setting/ timelapse/
panorama
*Introduction for diving mode

Specifications
Product name Waterproof Case for Feiyu Pocket 2S
product model Feiyu-WCP2S
Weight 405g
Water-proof Grade IPX8
Diving depth 40m
Compatible product Feiyu Pocket 2S Stablized Camera
This document is subject to change without notice.
If you have any questions about this document, please contact us by the
following ways.
Manufactured by: Guilin Feiyu Technology Incorporated Company
Website: www.feiyu-tech.com
Tel: [phone]
E-mail: [email protected]
*This product dose not include stablized camera.