Fellowes 9708601 Installation guide

LevadoAdjustableHeightDeskBase9650701/9708601/8802001/8949401
FAQ
Q:Isthereassemblyrequired?
A:Yes,thereisassemblyrequiredwhichshouldtakeanywherefrom90secondsto10minutes
dependingonthetabletopattachmentmethodyouchoose.TheLevadobasefeaturesfoldoutlegs
thatallowyoutolockintoplacewiththepatentpendingSwiftLok™design.Also,tosavetimeyou
canattachthetabletopusingtheno-toolsVersaTopClamps™.Simplytightentwothumbscrewson
eachsideofthebaseandyourtabletopissecure.Refertotheinstructionmanualtodecidewhich
installationisbestforyou.
Q:HowmuchweightcantheLevadoAdjustableHeightDeskBasehold?
A:Itcanholdupto220lbsincludingtheweightofthetabletop.
Q:Whatsizetabletopdoesthebaseaccommodate?
A:TheLevadoAdjustableHeightDeskBaseaccommodatestabletops48”-72”widex24”-30”deep.
Q:Mytabletopissmallerorlargerthan60”.HowdoIchangethewidthofmyLevadobasetofit?
A:Makesureyourtabletopisfacedownonasoft,cleansurfaceandplacebaseontable.Usethe
5mmAllenkeytoloosenthe(8)setscrewsontheinwardsideofthecrosschannels.Expandor
contractaccordinglyuntiltheendsareflushwiththetabletop.Re-securethe(8)setscrews.Referto
step1Bintheinstructionmanual.
LevadoAdjustableHeightDeskBase9650701/9708601/8802001/8949401
FAQ
Q:Isthereassemblyrequired?
A:Yes,thereisassemblyrequiredwhichshouldtakeanywherefrom90secondsto10minutes
dependingonthetabletopattachmentmethodyouchoose.TheLevadobasefeaturesfoldoutlegs
thatallowyoutolockintoplacewiththepatentpendingSwiftLok™design.Also,tosavetimeyou
canattachthetabletopusingtheno-toolsVersaTopClamps™.Simplytightentwothumbscrewson
eachsideofthebaseandyourtabletopissecure.Refertotheinstructionmanualtodecidewhich
installationisbestforyou.
Q:HowmuchweightcantheLevadoAdjustableHeightDeskBasehold?
A:Itcanholdupto220lbsincludingtheweightofthetabletop.
Q:Whatsizetabletopdoesthebaseaccommodate?
A:TheLevadoAdjustableHeightDeskBaseaccommodatestabletops48”-72”widex24”-30”deep.
Q:Mytabletopissmallerorlargerthan60”.HowdoIchangethewidthofmyLevadobasetofit?
A:Makesureyourtabletopisfacedownonasoft,cleansurfaceandplacebaseontable.Usethe
5mmAllenkeytoloosenthe(8)setscrewsontheinwardsideofthecrosschannels.Expandor
contractaccordinglyuntiltheendsareflushwiththetabletop.Re-securethe(8)setscrews.Referto
step1Bintheinstructionmanual.
LevadoAdjustableHeightDeskBase9650701/9708601/8802001/8949401
FAQ
Q:Isthereassemblyrequired?
A:Yes,thereisassemblyrequiredwhichshouldtakeanywherefrom90secondsto10minutes
dependingonthetabletopattachmentmethodyouchoose.TheLevadobasefeaturesfoldoutlegs
thatallowyoutolockintoplacewiththepatentpendingSwiftLok™design.Also,tosavetimeyou
canattachthetabletopusingtheno-toolsVersaTopClamps™.Simplytightentwothumbscrewson
eachsideofthebaseandyourtabletopissecure.Refertotheinstructionmanualtodecidewhich
installationisbestforyou.
Q:HowmuchweightcantheLevadoAdjustableHeightDeskBasehold?
A:Itcanholdupto220lbsincludingtheweightofthetabletop.
Q:Whatsizetabletopdoesthebaseaccommodate?
A:TheLevadoAdjustableHeightDeskBaseaccommodatestabletops48”-72”widex24”-30”deep.
Q:Mytabletopissmallerorlargerthan60”.HowdoIchangethewidthofmyLevadobasetofit?
A:Makesureyourtabletopisfacedownonasoft,cleansurfaceandplacebaseontable.Usethe
5mmAllenkeytoloosenthe(8)setscrewsontheinwardsideofthecrosschannels.Expandor
contractaccordinglyuntiltheendsareflushwiththetabletop.Re-securethe(8)setscrews.Referto
step1Bintheinstructionmanual.
STEP 1B - Only required if table is not 60” (1524mm) wide
Adjust the cross channels to their final lengths
• Use the 5mm Allen key to loosen the (8) set screws on the inward side of the
cross channels.
• Expand or contract the cross channels until flush with both ends of the desk.
Free cables as necessary to allow the frame to adjust.
• Once properly adjusted, use the 5mm Allen key to re-tighten the set screws
(8 total).
FAQ
Levado Adjustable Height Desk Base
9650701/9708601/8802001/8949401
| RESOURCES
Q:HowdoIfitmycurrenttabletopontotheLevadobase?
A:YoucanusetheVersaTopClamps™toinstallyourcurrenttabletopontotheLevadobase.Ensure
thatthetabletopis48”-72”widex24”-30”deep.Refertoinstalloption1intheinstructionmanual.
Q:HowfastdoestheLevadobaseadjustinheight?Doesthisspeedreducewhenmoreweightis
applied?
A:Theheightadjustsat1.4”persecond.Therewillnotbeanynoticeabledifferenceinspeedwith
additionalweightapplied.
Q:HowdoIsetthememoryonmyFeather-Lift™controlpaddle?
A:Therearetwogroupsofmemorysettings,eachwithtwoheightsettings.Totogglebetweenthe
twousersmomentarilypresstheMbuttonanddisplaywillreadU1orU2.Uptofourmemorystop
positionscanbeusedtosavespecificheightsoftheworksurface.Tosetaspecificposition:Raiseor
lowerthetabletothepositionyouwanttosave.PressandholdtheMbuttonfortwoseconds,the
LEDdisplaywillblink.Thismeansithasstoredthelocation.
Q:HowdoIclearthememoryonmyFeather-Lift™controlpaddle?
A:Toclearstoragesettings,pressandholdMbuttonfor8secondsuntilCLRdisplays.
Q:HowdoIchangetheFeather-Lift™controlpaddletodisplayinchesinsteadofcentimeters?
A:Pressandholdupanddownatsametimefor10seconds.
Q:HowlongdomycablesneedtobetoensuretheLevadocanmovefreely?
A:Thiswilldependonyoursetup.Ifanyofyourcablesareroutingtothefloorbesurethattheycan
accommodatethefullrangeofmotionupto48.5”.RefertoAccessoryInstallationStep1inthe
instructionmanual.

LevadoAdjustableHeightDeskBase9650701/9708601/8802001/8949401
FAQ
Q:Isthereassemblyrequired?
A:Yes,thereisassemblyrequiredwhichshouldtakeanywherefrom90secondsto10minutes
dependingonthetabletopattachmentmethodyouchoose.TheLevadobasefeaturesfoldoutlegs
thatallowyoutolockintoplacewiththepatentpendingSwiftLok™design.Also,tosavetimeyou
canattachthetabletopusingtheno-toolsVersaTopClamps™.Simplytightentwothumbscrewson
eachsideofthebaseandyourtabletopissecure.Refertotheinstructionmanualtodecidewhich
installationisbestforyou.
Q:HowmuchweightcantheLevadoAdjustableHeightDeskBasehold?
A:Itcanholdupto220lbsincludingtheweightofthetabletop.
Q:Whatsizetabletopdoesthebaseaccommodate?
A:TheLevadoAdjustableHeightDeskBaseaccommodatestabletops48”-72”widex24”-30”deep.
Q:Mytabletopissmallerorlargerthan60”.HowdoIchangethewidthofmyLevadobasetofit?
A:Makesureyourtabletopisfacedownonasoft,cleansurfaceandplacebaseontable.Usethe
5mmAllenkeytoloosenthe(8)setscrewsontheinwardsideofthecrosschannels.Expandor
contractaccordinglyuntiltheendsareflushwiththetabletop.Re-securethe(8)setscrews.Referto
step1Bintheinstructionmanual.
LevadoAdjustableHeightDeskBase9650701/9708601/8802001/8949401
FAQ
Q:Isthereassemblyrequired?
A:Yes,thereisassemblyrequiredwhichshouldtakeanywherefrom90secondsto10minutes
dependingonthetabletopattachmentmethodyouchoose.TheLevadobasefeaturesfoldoutlegs
thatallowyoutolockintoplacewiththepatentpendingSwiftLok™design.Also,tosavetimeyou
canattachthetabletopusingtheno-toolsVersaTopClamps™.Simplytightentwothumbscrewson
eachsideofthebaseandyourtabletopissecure.Refertotheinstructionmanualtodecidewhich
installationisbestforyou.
Q:HowmuchweightcantheLevadoAdjustableHeightDeskBasehold?
A:Itcanholdupto220lbsincludingtheweightofthetabletop.
Q:Whatsizetabletopdoesthebaseaccommodate?
A:TheLevadoAdjustableHeightDeskBaseaccommodatestabletops48”-72”widex24”-30”deep.
Q:Mytabletopissmallerorlargerthan60”.HowdoIchangethewidthofmyLevadobasetofit?
A:Makesureyourtabletopisfacedownonasoft,cleansurfaceandplacebaseontable.Usethe
5mmAllenkeytoloosenthe(8)setscrewsontheinwardsideofthecrosschannels.Expandor
contractaccordinglyuntiltheendsareflushwiththetabletop.Re-securethe(8)setscrews.Referto
step1Bintheinstructionmanual.
Q:HowdoIfitmycurrenttabletopontotheLevadobase?
A:YoucanusetheVersaTopClamps™toinstallyourcurrenttabletopontotheLevadobase.Ensure
thatthetabletopis48”-72”widex24”-30”deep.Refertoinstalloption1intheinstructionmanual.
Q:HowfastdoestheLevadobaseadjustinheight?Doesthisspeedreducewhenmoreweightis
applied?
A:Theheightadjustsat1.4”persecond.Therewillnotbeanynoticeabledifferenceinspeedwith
additionalweightapplied.
Q:HowdoIsetthememoryonmyFeather-Lift™controlpaddle?
A:Therearetwogroupsofmemorysettings,eachwithtwoheightsettings.Totogglebetweenthe
twousersmomentarilypresstheMbuttonanddisplaywillreadU1orU2.Uptofourmemorystop
positionscanbeusedtosavespecificheightsoftheworksurface.Tosetaspecificposition:Raiseor
lowerthetabletothepositionyouwanttosave.PressandholdtheMbuttonfortwoseconds,the
LEDdisplaywillblink.Thismeansithasstoredthelocation.
Q:HowdoIclearthememoryonmyFeather-Lift™controlpaddle?
A:Toclearstoragesettings,pressandholdMbuttonfor8secondsuntilCLRdisplays.
Q:HowdoIchangetheFeather-Lift™controlpaddletodisplayinchesinsteadofcentimeters?
A:Pressandholdupanddownatsametimefor10seconds.
Q:HowlongdomycablesneedtobetoensuretheLevadocanmovefreely?
A:Thiswilldependonyoursetup.Ifanyofyourcablesareroutingtothefloorbesurethattheycan
accommodatethefullrangeofmotionupto48.5”.RefertoAccessoryInstallationStep1inthe
instructionmanual.
STEP 3
Clamping base to table
• Slide clamps on each side of the table.
• On each clamp, tighten the (2) thumb
screws until each click.

Q:HownoisyistheLevadobase?
A:TheLevadobaseisquietinoperationandhasadecibelratingrangeof46-48.
Q:I’mmissingorbroken/damagedapart,whatdoIdo?
A:ContactFellowesCustomerServiceteamandwewillbegladtoassistyou1-800-955-0959.
Q:Thetableisn’tlevel,howdoIfixthis?
A:Ifthetablefeelsunbalancedadjustthe(4)levellingpadslocatedonthebottomofthefeet.Turn
clockwisetolowerandcounterclockwisetoraise.
Q:What’sthemaximumandminimumheightoftheLevado?
A:Thethreestagelegsprovideheightadjustmentfrom24.2”to48.5”.
ACCESSORY INSTALLATION
STEP 3
Level Feet
• If table feels unbalanced adjust the (4) leveling pads located on bottom of feet
• Turn clockwise to lower and counterclockwise to raise
Front
Rear
*Phillips screwdriver must be at least 4” long to install the cable management
STEP 1
Cable Management
• Position the cable tray in the center of the table towards the rear.
• Attach the cable tray using (4) M5 Phillips* round head screws. The open end should
face the rear.
• Use the additional provided cable management as needed.
• Cables must not interfere with table operation.
• Cables must not interfere with the user.
© 2019 Fellowes, Inc.