Feniex 4200 Series User manual

FENIEX // 2018 // INSTRUCTION MANUAL
WEB // www.feniexindustries.com
Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the United States and other countries
preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make
derivative works of the copyrighted material. Accordingly, any copyrighted material of Feniex and its licensors contained herein or in the Feniex products described in this Price
List may not be copied, reproduced, distributed, merged or modied, transmitted, transcribed, stored in retrieval system or translated into any language or computer language,
in any form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S. Patent & Trademark Oce.
C-4010
INSTRUCTION MANUAL
Is this the latest version?
SCAN HERE
TM

Safety Regulations & Warranty 3
Service after Expiration 3
Copyright 3
Feniex Product Copyright 3
Box Contents, Specications, & Wiring Diagram 4
Box Contents 4
Wig-Wag Flash Patterns 4
System Specications 4
Dimensions 4
Power & Conguration 5
Power 5
Auto Power On 5
Wiring Diagram 5
Latching or Momentary Buttons 5
Alternating Wig-Wag Flasher 5
Wig-Wag Functions 5
Mounting Instructions 6
Swivel Mount Installation 6
L-Bracket Installation 6
Button Legend Sheet 7
TABLE OF CONTENTS
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
2
TM

SAFETY REGULATIONS
The following provides all the information necessary to
safely operate the previously listed products of Feniex
Industries, Inc. Please read this manual thoroughly before
installing or operating your new product in order to
prevent any damage or injury. Failure to follow the listed
instructions in this manual may result in damage to your
products or personal injury.
• Proper installation of this product requires good
knowledge of automotive systems, electronics &
procedures.
• Please guarantee all vital components of the vehicle
are not in danger of being damaged by drilling holes
necessary for installation. Check all sides of the
mounting surface before drilling any holes into the
vehicle.
• Do not install this product in any way that interferes
with the deployment of the air bag. Doing so may
damage the eectiveness of the air bag & can lead to
serious personal and vehicle injury. The installer will
assume full responsibility of proper installation of the
new unit.
• Please clean the mounting surface before installation
of the unit when using tape, brackets, magnet, Velcro or
suction cups.
• The product’s ground wire must be connected directly
to the negative (-) battery post for eective use of the
unit. Please follow all wiring guidelines provided to
guarantee long lifespan & productivity. Failing to follow
these instructions may result in damage to the product.
WARRANTY
Feniex Industries, Inc. warrants to the original purchaser
that the product shall be free from defects in material &
workmanship for 5 years from the date of purchase for
all LED products. Feniex Industries warranties speakers,
sirens, ashers, & controllers for 2 years.
If warranty service is needed, please contact customer
support:
Phone: [phone]
Web Site: www.Feniex.com/support
Email: [e-mail]
If the product needs to be returned for repair or
replacement, contact our customer service team (using
any method listed above) to receive a Return Merchandise
Authorization (RMA) number. Operational times are from 9
a.m. to 6 p.m. central time, Monday through Friday.
CONDITIONS
Feniex Industries, Inc. will not be held responsible for any
costs associated with equipment removal and/or
re-installation resulting from a warranty claim. It is the sole
responsibility of the party initiating a warranty claim to pay
shipping charges associated with returning a product to
Feniex Industries for repair or replacement.
SERVICE AFTER EXPIRATION
Feniex Industries will still provide service for all products
after expiration of the warranty. For any issues, call the
customer support line. In some instances it may be
necessary for the product to be shipped, freight prepaid
and insured for loss or damage to Feniex headquarters.
SAFETY REGULATIONS & WARRANTY
Utilizing non-factory screws and mounting brackets may result
in the loss of warranty coverage.
COPYRIGHT
This instruction manual and the Feniex products
described in this instruction manual may include or
describe copyrighted Feniex material. Laws in the United
States and other countries preserve for Feniex Industries
and its licensors certain exclusive rights for copyrighted
material, including the exclusive right to copy, reproduce
in any form, distribute and make derivative works of
the copyrighted material. Accordingly, any copyrighted
material of Feniex and its licensors contained herein or in
the Feniex products described in this instruction manual
may not be copied, reproduced, distributed, merged
or modied in any manner without the express written
permission of Feniex Industries, Inc.
FENIEX PRODUCT COPYRIGHTS
The products described in this document are the property
of Feniex Industries, Inc. It is furnished by express license
agreement only and may be used only in accordance with the
terms of such an agreement. Products and documentation
are copyrighted materials. Making unauthorized copies is
prohibited by law. No part of the product or documentation
may be reproduced, transmitted, transcribed, stored in
retrieval system or translated into any language or computer
language, in any form or by any means, without prior
permission from Feniex Industries, Inc.
Please do not send in product without contacting support rst
for a Return Merchandise Authorization (RMA) number.
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
3
TM

COMPONENT QUANTITY
1. T3 1
2. Swivel Mount 1
3. L-Bracket Mounts 2
4. Bolts 2
BOX CONTENTS, SPECIFICATIONS, DIMENSIONS, & PATTERNS
SYSTEM SPECIFICATIONS
Input Power 12 VDC
Current Draw Up to 21 Amps
Maximum Output 3.5 Amps Per Channel
Standby Power 10mA
External Fuse 125% of Circuit Load
Mounts Swivel Mount or L-Brackets
Flash Patterns 11
IP Rating IP67
Relays Solid State, Built-in
Switch Type Latching and/or Momentary
Buttons Rubberized, Backlit
Button Legends 130 (126 + 4 Blanks)
Dimensions 4.9" H x 2.7" L x 0.7" W
Warranty 2 Years
WIG-WAG FLASH PATTERNS
Single Flash [Slow] Quad Flash [Slow]
Single Flash [Fast] Quad Flash [Fast]
Single Flash [Combo] Quad Flash [Combo]
Triple Flash [Slow] Combination #1
Triple Flash [Fast] Combination #2
Triple Flash [Combo]
3.94in.
2.76in.
0.75in.
0.84in.
2.64in.
2.36in.
0.69in.
1in.
0.63in.
DIMENSIONS
BOX CONTENTS
4200 Mini
Swivel Mount
L-Brackets
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
4
TM

WIRING DIAGRAM
COLOR FUNCTION POLARITY CONNECTION
Red Battery 12v (+) Positive Terminal
Black Ground 12v (-) Negative Terminal
Green Button #1 12v (+) Output #1
White Button #2 12v (+) Output #2
Blue Button #3 12v (+) Output #3
Yellow Button #4 12v (+) Output #4
Brown Button #5 12v (+) Output #5
Gray Button #6 12v (+) Output #6
WIRING DIAGRAM
Button 1
Button 3
Button 5
On/O Button
Button 2
Button 4
Button 6
POWER
1) To power the unit, extend the red wire to a 12v (+) post.
Extend the black wire to the ground post of the vehicle's
battery.
LATCHING OR MOMENTARY BUTTONS
You can program each of the 6 outputs to operate as
either latching or momentary functionality.
To toggle this mode:
1) While the unit is powered, but turned o, press and hold
the button you wish to prgram.
2) While holding the button from step 1, press and hold
the power button until a beep is heard.
3) The mode has been toggled. To change it again, repeat
steps 1 & 2.
ALTERNATING WIG-WAG FLASHER
You can program outputs 1 & 2 to operate as an
alternating wig-wag asher.
To toggle this mode:
1) While the unit is powered, but turned o, press and hold
both button #1 and button #2.
2) While holding the buttons from step 1, press and hold
the power button until a beep is heard.
3) The mode has been toggled. To change it again, repeat
steps 1 & 2.
WIG-WAG FUNCTIONS
When the wig-wag function is active, button #1 activates
and deactivates the mode while button #2 changes the
selected ash patterns. Respectively, output #1 and
output #2 are channels 1 & 2 of the asher.
Wig-wag mode will override the latching or momentary
functionality while it is active in the programming.
There are multiple ash patterns available, including
slower patterns for use with headlight systems and faster,
strobing patterns for use with LED lighting. Buttons 1 & 2
will simulate the pattern being displayed to outputs 1 & 2.
The 4200 Mini is capable of outputting a maximum total of 21
amps for all 6 outputs, or 3.5 amps divided equally across all 6
channels. The unit will power o if that capacity is surpassed.
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
5
TM

MOUNTING INSTRUCTIONS
SWIVEL MOUNT INSTALLATION
1) Secure the Swivel Ball to the base of the controller
using the #10 screw.
2) Attach the swivel ball to the swivel bracket base using
the #10 screw.
3) Using the #10 screw, secure the two clamps loosely
together.
4) Place the clamps and screw around the 2 swivel balls.
Tighten the clamp screw, thereby attaching the swivel
bracket base to the mini controller.
5) Secure the Swivel Bracket to the rear of the controller
(as shown in the diagram).
L-BRACKET INSTALLATION
Note: The provided L-brackets can be mounted either
way, L-inward or L-outward. The instructions reect the
default mounting method: L-outward.
1) Utilizing the provided screws, secure the L-Bracket to
the side of the controller using a Phillips head screwdriver.
Can be mounted in
either orientation
2) Repeat Step 1 on the opposite side of the controller, so
both sides have the L-Bracket securely connected.
3) Place the unit against the intended mounting surface.
4) Mark the areas where the mounting holes will be drilled.
If the mounting surface is part of the vehicle, make sure
no vital components could be damaged by the drilling
process.
5) Drill two mounting holes on the mounting surface,
making sure no vital components of the surface are
damaged.
6) Using customer supplied screws, secure the 4200 Mini
to the mounting surface.
6) Place the unit against the intended mounting surface.
7) Mark the areas where the mounting holes will be drilled.
If the mounting surface is part of the vehicle, make sure
no vital components could be damaged by the drilling
process.
8) Drill two mounting holes on the mounting surface,
making sure no vital components of the surface are
damaged.
9) Using customer supplied screws, secure the 4200 Mini
to the mounting surface.
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
6
TM

BUTTON LEGENDS
Black
Out
Hide-A
Way Gun Lock Clear Power Slow Cab Aux 4 Low Power Siren Manual Plow Light
Bumper Door Gun Step Kill Fast Trunk Aux 5 LBAR
Power Q-Siren Air Horn
Work
Light
Invert Grill Lock Wig
Wag Dim Trac To w Aux 6 LBAR Front Wail Mech Map Light
Charg Deck Rapid
Flash Hazard On/O Brake Alarm Code 1 LBAR Rear Wal 2 Hands Free Search Flash
Stand By Dash Flash
Mode Video Amber Back Up Radio Code 2 Alley Left Yelp Phaser Dome Warn
Strobe Front Pattern Camera White K9 Pursuit Code 3 Alley
Right Yelp 2 Sting Flood Left
Preemp Rear Mode Comp Green Side
Cut Warn Mode 1 Front Cut Hi-Lo Tap 1 Front Flood Right
Left Side Upper PC Red
License
Plate Aux 1 Mode 2 Rear
Cut Horn Tap 2 Rear Flood Center
Right Fog Lower Radar Blue LED Aux 2 Mode 3 Right
Cut Horn 1 Spot [BLANK] [BLANK]
Center Cruise Tail Main Reset Area Aux 3 Take
Down
Left
Cut Horn 2 Spot Light [BLANK] [BLANK]
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
7
TM