
Ope ating Inst uction
ON/OFF
With the light switched off, p ess and hold the top switch fo 0.5 seconds to tu n on the light on the
last used output.
With the light tu ned on, p ess and hold the top switch fo 0.5 seconds to tu n off the light.
Output Selection
With the light switched on white light mode, single click the top switch to cycle th ough
Low→Med→High→Tu bo.
With the light switched on ed light mode, single click the top switch to cycle th ough Red→Signal
Light→SOS.
Mode Switching
In white light mode, p ess and hold the top switch fo 1.2 seconds to ente ed light mode.
In ed light mode, p ess and hold the top switch fo 1.2 seconds to ente white light mode.
Batte y level Indication
With the light switched off, single click the top switch. The batte y level indicato will display the
batte y status fo 3 seconds.
G een constant on: satu ated, 100% - 85%
G een flashes: sufficient, 85% - 50%
Red constant on: poo , 50% - 25%
Red flashes: c itical, 25% - 1%
Note: The e is no indication when CR123A batte y is used.
Cha ging
1. Tu n off the light. Plug the USB side of the cha ging cable into any USB powe supply. Uncove the
anti-dust cap of the light, and plug the Mic o USB side of the cha ging cable into the cha ging po t of
the light.
2. The batte y level indicato displays ed while cha ging and tu ns to solid g een when cha ging is
complete. The no mal cha ging time of the included Fenix ARB-L17-700 is about 1.5 hou s.
3. Once cha ging is completed, be su e to emove the cha ging cable and eplace the anti-dust cap to
p otect against dust and fo eign objects.
4. Recha ge a sto ed light eve y fou months to maintain optimum pe fo mance of the batte y.
5. Only Low output can be used when the light is being cha ged, but cha ging time will be p olonged.
Battery Specifications
Type Dimensio
n
Nominal
Voltage Usability
Fenix ARB-L16-700 16340 3.7V Recommended √√
Non- echa geable
Batte y (Lithium) CR123A 3V Usable √
Recha geable Batte y
(Li-ion) 16340 3.6V/3.7V Cautious** !
Warning: Fo eme gency situation, non- echa geable CR123A batte y can be used, but cha ging is
p ohibited. Recha geable Li-ion batte y with no p otection boa d is fo bidden.
**16340 echa geable Li-ion batte ies a e powe ful cells designed fo comme cial applications and
must be t eated with caution and handled with ca e. Quality batte ies with ci cuit p otection will
educe the potential fo combustion o explosion but cell damage o sho t ci cuiting a e potential isks
the use assumes.
Battery Replacement
Unsc ew the tail cap to inse t the batte y with the anode side (+) towa ds the light head, then sc ew