ferm living Curvature Wall Table User manual

Assembly manual
Curvature Wall Table

Tools
NEEDED TOOLS RECOMMENDED TOOLS
Box Content
1 x Table
2 x M4 Screws (B)
1 x Wall bracket (A) 1 x Allen
key
3 x Wallplugs
Electrical drill PencelScrewdriver crosshead Spirit level
1
Assembly Process
Find your position of the table on the wall. Mark and drill hole for bottom wall
bracket. Mount the wall bracket (A) with a wall plug. Use the Allen Key .
Drill hole Wall bracket (A)
2 3

2 3
Assembly ProcessAssembly Process
Loosen the pinion screw and place the table on the
wall and the wall bracket. Use the Allen key .
Tilt the table into the correct position. Mark and drill the two holes.
Mount the table with two wall plugs and screws (B).
(Recommended tools) Use spirit level
Drill hole Drill hole
4 5

fermliving.com
4
Assembly Process
Screw in the pinion
screw. Use the Allen key .
6