ferm living PUJO COAT STAND User manual

fermliving.com
PUJO COAT STAND
ASSEMBLY MANUAL

CONTENT OF THE BOX
x
x
x
x
Wooden knob
x
x
x
3
2
1
1
4
2
Felt feet for the base
1
A
B

ASSEMBLY PROCESS
2a. Place the collected frame on top of a table:
NB! Make sure to protect the table top
by covering it with a suitable fabric
before placing the frame on the surface!
PLEASE NOTE :
THIS STEP
REQUIRES 2 X PEOPLE
2b. One person holds the metal frame,
while the other person mounts the
base to the frame.
2c. The base is mounted by
inserting the three wide
screws (B) into the holes
on the backside of the
base and then attaching
them to the metal frame.
B
B
B
ASSEMBLY PROCESS
1a. Start by attaching
the smaller metal frame
to the bigger frame.
1b. The small
screw (A)
is inserted
from beneath
to fasten the
upper joint.
PLEASE NOTE :
THE MOUNTING
PROCESS REQUIRES
2 X PEOPLE
A

3a. Insert the two long screws
into the two wooden knobs.
ASSEMBLY PROCESS
3b. Finally; screw the
two wooden knobs
onto the metal frame.
3c. Add the felt feet to the
backside of the base to
protect your floor.
CONTENT OF THE BOX
x 1x 1x 1
Base