ferm living Pond Dining Table User manual

Assembly manual
Pond Dining Table

General Instructions
PLEASE READ BEFORE INSTALLATION
WARNING:
The safety of this fitting can only be guaranteed if the following instructions are observed during both
installation and use. Please retain these instructions safely after installation.
PLEASE OBSERVE THE FOLLOWING GUIDELINES:
– Ensure that all screws are firmly tightened before using the table.
– This table is made from powder coated galvanized structural steel to give an anti-rust surface.
– If the anti-rust surface is damaged, the table will start to rust.
– Be aware, prolonged outdoor use and exposure to the elements will cause rusting over time.
We therefore advise that you bring your table inside during cold weather – particularly if the
temperature drops below freezing.
CLEANING INSTRUCTIONS:
– Gently wipe with soft damp cloth with water and mild soap if needed.
MORE INFORMATION:
To access further information such as product overview and material descriptions, please visit our
website at www.fermliving.com. If you have any questions or comments, please do not hesitate to
contact us at [email protected].
2 3

1
Assembly Process
Mount the table base on the column
with 3 (A) counter sunk screws.
Box Content
6x
A) Counter Sunk Screw
1x
Table top
1x
Connection plate
1x
Table base
1x
Column
8x
B) Counter Sunk Screw
1x
Allen key
4 5

2
Assembly Process
Mount the Connection plate on the
column with 3 (A) counter sunk screws.
3
Assembly Process
Lay the table top on a blanket and mount
the table leg with 8 (B) counter sunk screws.
6 7

fermliving.com