Fiilex V70 User manual

V70
Print Viewing Lamp
User Manual
LED

Parts Diagram
Air Vents
Lamp Cover
Flexible Arm
Lens
Stand
A
B
C
D
E
F
G
H
I
Dome Diffuser
DC Plug
Touch Panel
Base
A
B
D
E
F
H
I
G
C

Safety and
Maintenance
The V70 Print Viewing Lamp is designed for indoor
use only.
Do not attempt to disassemble the lamp, as this
may damage internal parts and may cause electric
shock.
Check the AC mains voltage before use (between
100-240 VAC at 47/63 Hz). Inappropriate voltage
will cause damage to the electronic parts of the
lamp and the power supply.
Strong surrounding radio frequencies may interfere
with the lamp's touch function.
Keep operation temperatures within 0˚C ~ 40˚C.
Use a soft, dry towel to carefully clean the exterior
of the lamp.
Do not expose the product to high humidity.
Keep air vents clear to avoid overheating the lamp.

Package Contents
V70 Print Viewing Lamp
Power Supply
Dome Diffuser
User Manual
• V70 Print Viewing Lamp
Power Consumption
Input Voltage
11-13 W Max
24 VDC ± 5%
• Power Supply
Input
Output
100-240 VAC 50-60 Hz
24V, 1A max
Electrical
Specifications
Operation
1.Plug the DC power plug into the lamp and the AC
power plug into wall outlet.
5.To use the Dome Diffuser on your V70, align the
dome's magnets with the screws on the lamp head.
2.Tap to turn the V70 on.
3.Tap (CCT) to change color temperatures. The
V70 is programmed to cycle through 3000K,
4000K, 5000K and 6500K modes with each tap.
4.Hold (DIM) to adjust the intensity of any color
temperature. The V70 has dimming steps from
100% to 20% for each color temperature. Tap
(DIM) again to return the light to the high intensity
setting.

3.5”
10”
Position
High Intensity
1382lux
1254lux
666 lux
1543 lux
1403 lux
750 lux
Center
3000K 4000K
Position
Low Intensity
286 lux
260 lux
140 lux
291 lux
266 lux
144 lux
Center
3.5”
10”
3000K 4000K
1595 lux
1450lux
780 lux
5000K
1605 lux
1462 lux
795 lux
6500K
278 lux
252 lux
137 lux
5000K
303 lux
276 lux
151 lux
6500K
Photometric
Specifications
CRI values are ≥ 90

Ver.A1