Fimco TC-12-P User manual

Page 1
LIMITED WARRANTY
This unit is warranted againts defects in materials and workmanship to the orginal purchaser, under normal use and service, for a period of ninety (90) days from date of sale. During the warranty
period, we will repair or replace at our option free of charge to the original purchaser, any part of the unit that our examination shows to be defective in workmanship or materials. This warranty does
not apply to damage in transit or damage caused by misuse, abuse, neglect, normal wear, or alterations by unauthorized persons.
5301816
MODEL NO. TC-12-P
12 CU. POLY CART TRAILER
ASSEMBLY / PARTS


 

BEFORE RETURNING THIS PRODUCT
FOR ANY REASON, PLEASE CALL
1-800-831-0027
IF YOU SHOULD HAVE A QUESTION OR
EXPERIENCE A PROBLEM WITH YOUR
FIMCO INDUSTRIES PRODUCT:
1-800-831-0027
BEFORE YOU CALL, PLEASE HAVE THE
FOLLOWING INFORMATION AVAILABLE:
SALES RECEIPT & MODEL NUMBER. IN MOST
CASES, A FIMCO INDUSTRIES EMPLOYEE CAN
RESOLVE THE PROBLEM OVER THE PHONE.
GENERAL INFORMATION
The purpose of this manual is to assist you in operating and
maintaining your lawn and garden sprayer. Please read it
carefully as it furnishes information which will help you achieve
years of dependable trouble free operation.
WARRANTY / PARTS / SERVICE
Products are warranted for one year from date of purchase
against manufacturer or workmanship defects.
Your authorized dealer is the best source of replacement

remember to give the following information:
1. Correct part description and part number.
2. Model Number of your sprayer.
3. Serial Number of your sprayer.
Part description and part numbers can be obtained from the
illustrated parts list section of this manual.
Whenever you need parts or repair service, contact your

original sales slip, or other evidence of purchase date, to
your distributor / dealer.
TECHNICAL SPECIFICATIONS




NOTE: Tractor speed should be governed by weight
of load. The heavier the load, the slower the speed for
safe operation.
MAINTENANCE INSTRUCTIONS

will prolong life of tires.
NOTE: 300 lbs. maximum capacity
Approximate weight 1 Cu. Ft.


Gravel: 110 lbs.


Page 2
ASSEMBLY INSTRUCTIONS
Remove the parts to the unit from the carton. Refer to the
exploded view and parts list to help identify the parts.
You cart will come mostly assembled. The only assembly
necessary will be as follows:
1. Place the wheels onto the axles, making sure the valve
stems are facing outwards. Slide a machinery bushing (Item
9) onto the axle, and secure the wheel(s) with a cotter pin
(Itme 12).
2. Position the pre-assembled tongue between the two tabs in
the middle of the axle. Run a pin (Item 13) through the holes
at this connection point, and secure in place with (2) cotter
pins (Item 12).
3. Rotate the tongue assembly upward until the latch pin is

the front of the unit to allow the tongue to rotate up just a bit
further for the 'locked' position.


WARNING DANGER OF IMPROPER USE
OF TRAILER CART
This unit is intended for use only with riding mowers or tractors.

or transporting passengers of any sort. Such use could result
in injuries for which we cannot be held responsible.
PLEASE DO NOT RETURN THIS MERCHANDISE
TO THE STORE. CALL US AND WE WILL TAKE
CARE OF ANY PROBLEM YOU MIGHT HAVE
WITH THIS PRODUCT.
HOW TO ORDER PARTS:
When ordering parts, always give model number, part
number, part description and inspector number.
SEND TO:
FIMCO INC.
1000 Fimco Lane





Page 3
14
12
1
1
13
12
12
3
8
1
9
5
3
7
15
5
9
12
10
1
1
38
8
8
3
3
1
16
14
11
2
4
6
3
1
8
8
TC-12-P (5301816)
Exploded View/Parts List:
Latch Lock Plate
150270786
1
1
1
1
4
1
1
2
28
1
510108612
5275822
5275821
5275820
5101293
15
16
14
13
5101077
5083006
5041094
5034083
5027081
9
11
10
8
7
Axle Mount Weldment
Tongue Weldment
Cotter Pin, 3/16" x 1 1/2" (Zinc-Plated)
Cotter Pin, 1/8" x 1"
12 Cu. Ft. Poly Cart Hopper
Mach. Bush., 3/4" ID x 1 1/4" OD
H.H.C.S., 1/4"-20 x 1"
Center Pivot Pin
Latch
Toolbox Cover
2
1
28
1
28
Qty
5021090
5019243
5016114
5016030
5006306
3
5
4
2
1
Number
PartItem
No
Tire, 4.80 x 8 (2-Ply)
Release Latch Return Spring
1/4"-20 Hex Whiz (Flange) Locknut
Flatwasher, 1/4"
Flatwasher, 3/8"
Description
.25
.50
.25
.25
.02
29.67
3.20
.25
.05
Price
List
hopper w/hardware shown.
This plate is bolted to the
83